RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 3PK壞咗可以去到修理呀 [打印本頁]

作者: peugeot206    時間: 2006-12-13 13:09
標題: 3PK壞咗可以去到修理呀
一年唔夠無單

謝謝
作者: courel500    時間: 2006-12-13 13:16
send 個 mail 去 futaba ( japan / usa ) 問下可唔可以 send 返去整 ?
作者: B-4    時間: 2006-12-13 14:07
甘搞法..可以買過支新3PK了..
作者: m93r    時間: 2006-12-13 14:30
寄過去來回都4,5百蚊,又要等幾個月,仲未計人工零件
買過支新把啦
作者: kaho0338    時間: 2006-12-13 14:36
你可以拆d軚跌, 個d 出來sell sell 佢既, 都值唔少$....
之後再買過支3pk, 一係try try ex10/m11
作者: NANA    時間: 2006-12-13 15:59
點壞法呀?
作者: peugeot206    時間: 2006-12-13 16:34
標題: 回復 #6 NANA 的帖子
開機無反應呀
作者: 土星一號    時間: 2006-12-13 17:21
嘩,我正想買支,多謝堤點
作者: gibson    時間: 2006-12-13 17:40
原帖由 peugeot206 於 2006-12-13 13:09 發表
一年唔夠無單

謝謝



If I have this problem , I will go to the RC shop which I bought the 3pk, to see what is my next step.  I think Futuba is a big company, they should responsible for all the after sales service.  

Many years ago, if I have any problem, I will bring to Radar Shop, they will mail it to Japan for service and mail back, the charge was very reasonable, sometimes they just changed to a brand new one for you.
作者: wave    時間: 2006-12-13 17:45
原帖由 gibson 於 2006-12-13 17:40 發表



If I have this problem , I will go to the RC shop which I bought the 3pk, to see what is my next step.  I think Futuba is a big company, they should responsible for all the after sales servi ...


佢地只會收番運費.
作者: peugeot206    時間: 2006-12-13 19:50
問咗Radar, 等夠其它壞parts一次過運+維修 至少三個星期。運費$100-$200
獨立運速遞+維修約兩星期左右。
維修費另計

作者: gibson    時間: 2006-12-13 19:57
原帖由 peugeot206 於 2006-12-13 19:50 發表
問咗Radar, 等夠其它壞parts一次過運+維修 至少三個星期。運費$100-$200
獨立運速遞+維修約兩星期左右。
維修費另計


Futaba made tons of 3PK and 3PKS in the market, of course few of them may had defect.  Even porsche and Ferrari also had Friday cars.   If I were you, I will go ahead to send it to repair.....you may gain experience of Futaba how to repair your 3pk....   
Around 18 years ago, my 9 channels pcm receiver was demaged, at that time, the pcm was quite new in the market, I sent it to Japan, in return, they sent me a brand new one........ caused me HKD36.  mailing charge....  one and a half month...  by surface.....
作者: minimini    時間: 2006-12-13 20:01
原帖由 gibson 於 2006-12-13 19:57 發表


Futaba made tons of 3PK and 3PKS in the market, of course few of them may had defect.  Even porsche and Ferrari also had Friday cars.   If I were you, I will go ahead to send it to repair..... ...


that means at that time Futaba was not able to repair your 9 ch pcm..........so they send you a new set instead......no other better method.......
作者: gibson    時間: 2006-12-13 22:35
原帖由 minimini 於 2006-12-13 20:01 發表


that means at that time Futaba was not able to repair your 9 ch pcm..........so they send you a new set instead......no other better method.......


May be too difficult to fix, Its still working fine in my M04.  


                               
登錄/註冊後可看大圖

作者: 清清    時間: 2006-12-13 22:52
羅去偉高佢會幫你寄返廠整,只收運費約百多元,約三個月~




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2