RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Progress on Capricorn C801 [打印本頁]

作者: ernestf 時間: 2013-8-13 18:42
標題: Progress on Capricorn C801
Very slow progress on C801, hope to get it done in two weeks time

Parts are in good quality and fit well so far but need to get parts from many bags for one single step during the build process.

作者: henryb4sun 時間: 2013-8-14 00:20
It is really in good quality and pretty color!

作者: victor1997621 時間: 2013-8-14 18:45
Nice！I'm going to buy LAB C-801 also！

I have told by the Factory drivers. Here is the tips they gave me:
DO NOT use one way bearing oil, just use the ball diff grease and squeeze a small bit into the oneway and then spin it on the shaft to work it in.
That's what I was told. Hope could give you some help!

CAPRICORN LAB C-801 is dam hot!!! Excellent quality!!!

作者: ernestf 時間: 2013-9-15 00:10
Progress on C801 has been very slow lately ...
Might need another few weeks to complete the whole project.

Thanks for the advice C Hing on the one-way oil.

作者: chanyh13071 時間: 2013-9-26 22:07

作者: ernestf 時間: 2013-10-14 22:43
I dont know why, but the progress has been very slow.
Chassis is completed finally without shocks and body.

作者: nick0080 時間: 2013-10-16 17:19
正 ,

作者: ernestf 時間: 2013-11-10 22:18
It is getting there.
The local track in Singapore is under maintenance and not available until late Nov.
C801 is powered by 2x Sanwa 962 servo and Picco Torque engine.

作者: rk2 時間: 2013-11-13 09:28
look very nice. :

作者: hhxhkuroro 時間: 2013-12-10 09:18
iam getting c801 also.

作者: ernestf 時間: 2014-1-12 18:16
Finally test the C801 for couple weekends, using my old Picco Torque engine.
Car is a bit sensitive, but controlable. It feels more active than my 977 but it is just my initial feeling.

作者: victor1997621 時間: 2014-1-12 18:32

ernestf 發表於 2014-1-12 18:16
Finally test the C801 for couple weekends, using my old Picco Torque engine.
Car is a bit sensitive, ...

Where did u get those red fuel tubes? What brand is it?

作者: victor1997621 時間: 2014-1-14 22:46

ernestf 發表於 2014-1-12 18:16
Finally test the C801 for couple weekends, using my old Picco Torque engine.
Car is a bit sensitive, ...

C-hing 請問collari edition係咪跟咗Version2 新版避震？

作者: vp-pro 時間: 2014-1-24 01:03
新版比舊版果然唔同!

作者: ernestf 時間: 2014-1-25 23:22

victor1997621 發表於 2014-1-14 22:46
C-hing 請問collari edition係咪跟咗Version2 新版避震？

I am not sure as I don't have the older version to compare and the manual did not say much ,,,,

作者: victor1997621 時間: 2014-2-9 23:43

ernestf 發表於 2014-1-12 18:16
Finally test the C801 for couple weekends, using my old Picco Torque engine.
Car is a bit sensitive, ...

C-HING,你D紅色油管好靚！請問系邊度買的？

作者: ernestf 時間: 2014-2-11 16:55
Bought from local shop in Singapore

作者: victor1997621 時間: 2014-2-14 19:51

ernestf 發表於 2014-2-11 16:55
Bought from local shop in Singapore

請問係咩牌子的？

作者: ernestf 時間: 2014-2-16 09:01

victor1997621 發表於 2014-2-14 19:51
請問係咩牌子的？

A local brand here in Singapore - RaceCrafts

作者: victor1997621 時間: 2014-2-16 13:47

ernestf 發表於 2014-1-25 23:22
I am not sure as I don't have the older version to compare and the manual did not say much ,,,,

Version 2避震底蓋係擰上去的，而唔系用C扣固定。

作者: victor1997621 時間: 2014-2-16 13:48

ernestf 發表於 2014-2-16 09:01
A local brand here in Singapore - RaceCrafts

所有紅色油管，呢只紅色最襯C801！！！

作者: ernestf 時間: 2014-4-19 20:54
The previous Picco Torque (with blue heatsink) is about to retire. C801 is now running with Picco Worlds Japan version. It has a good power and nice "voice"

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)