RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 加入truggy 行列 [打印本頁]

作者: piranharowana 時間: 2013-11-13 22:12
標題: 加入truggy 行列
小弟最終係buggy，rally同truggy之間揀咗truggy,不過未買齊嘢

作者: cccan 時間: 2013-11-13 23:24

作者: bigmouthguy 時間: 2013-11-14 01:54
呢架野唔錯, 不過唔好玩得太暴力. 我架TC02C 上兩個星期比我唔小心撞爛尾底盤

作者: bigmouthguy 時間: 2013-11-14 01:55
你差咩未買?
電變買好盈比1/8用個隻都OK 可以用3S電11.1V

作者: piranharowana 時間: 2013-11-14 02:02
爭servo未買

作者: piranharowana 時間: 2013-11-14 02:05
仲有呔添，跟車得對鈴，諗緊用咩呔。自己裝定買套鈴連呔好呢？

作者: choyip 時間: 2013-11-14 08:19

行6S 更爆

作者: euro614 時間: 2013-11-14 10:32
本帖最後由 euro614 於 2013-11-14 10:34 編輯

師兄，波箱撐一定要換金屬Option喎
TU0838

[attach]758804[/attach]

作者: piranharowana 時間: 2013-11-14 11:45
哦，是嗎？謝謝你啊，但原裝係咪一撞就會報銷？

作者: piranharowana 時間: 2013-11-14 11:46
6s?會唔會頂唔順？

作者: euro614 時間: 2013-11-14 12:55
本帖最後由 euro614 於 2013-11-14 13:01 編輯

piranharowana 發表於 2013-11-14 11:45
哦，是嗎？謝謝你啊，但原裝係咪一撞就會報銷？

原裝是膠的，膠太軟，但支CVD 會食晒...。
其實仲有樣，不過唔肯定是否o岩 truggy, 係 TU0817 Chassis Protection Plate
另外Servo saver and Servo Horn 最好用埋金屬，咁就正常。

作者: piranharowana 時間: 2013-11-14 13:40
咁聽師兄咁講真係要換喎，嗰個chassis protection plate都係要金屬？本身servo horm同saver係咩嚟？唔好意思呀，小弟初玩太多問題

作者: euro614 時間: 2013-11-14 14:07

piranharowana 發表於 2013-11-14 13:40
咁聽師兄咁講真係要換喎，嗰個chassis protection plate都係要金屬？本身servo horm同saver係咩嚟？唔好意 ...

Plate 係金屬，保護底版尾波箱位置。
金屬servo saver and horn，原裝係膠的，無咁受力。
[attach]758817[/attach]
[attach]758818[/attach]
[attach]758819[/attach]

作者: piranharowana 時間: 2013-11-14 14:38
咁一早換咗佢定爛咗先換好呢？呔選擇咩好呀請問

作者: slowerthanyou 時間: 2013-11-14 17:34
hey there, so you got a tuggy in the end? Nice. Looks like a lot of fun

suggestion for batteries/motor combo

4s 1900-2100KV
6s 1400-1700KV

作者: chanyh13071 時間: 2013-11-14 20:40

作者: piranharowana 時間: 2013-11-14 22:57

slowerthanyou 發表於 2013-11-14 17:34
hey there, so you got a tuggy in the end? Nice. Looks like a lot of fun

suggestion for batteries/mo ...

咁我買咗hobbywing 150a 1800 kv用6s定4s 好呢？

作者: bigmouthguy 時間: 2013-11-15 02:38
4S 無咁猛, 你先去了解架車既特性, 熟左先買6S

作者: 965 時間: 2013-11-15 10:49
I wonder how much is it in HK?

Does the Truggy version come in RTR?

I actually like the idea of "plastic" chassis brace, worst case, that piece of plastic break, may be $20HKD or so ... but with big strong Metal chassis brace, you may bend the chassis, break the arms/tower/ etc before the brace ...

It really depends how you play, for track/race, you want a very stiff chassis, for bashing/jump high, you want a bit flexibility ..

Somehow, my Truggies with alloy brace, (Serpent/Hpi/Losi/Mugen etc .. ) all result with broken arm/mount/hub/tower etc ...

Actually, with "turnbuckle" is the best, probably just pop out under big jump/hit!

(something like this http://www.pmhobbycraft.ca/RC8-CHASSIS-BRACE-SET-REAR-ASC89069/)

作者: 965 時間: 2013-11-15 10:52

You can actually run 5s, I like 5s a lots, (if you use 1800kv) especially for the T8, the motor side is heavier then the other side, so you can run 3s on one side, 2s on the motor side, to balance it off.

Let's say 4000 mah, 3s is app 350g .. 2s is 250g ...

作者: piranharowana 時間: 2013-11-15 10:56
thx all ching, but i saw all of the buggy and truggy use metal chassis

作者: euro614 時間: 2013-11-15 11:18

965 發表於 2013-11-15 10:49
I wonder how much is it in HK?

Does the Truggy version come in RTR?

無錯，膠撐好平，斷左都唔肉痛，但佢太軟的關係，唔夠力撐，果份衝力就去左CVD，輕則彎，重則斷。

作者: piranharowana 時間: 2013-11-15 14:47
咁好似換咗先好啲喎

作者: 965 時間: 2013-11-15 15:52
The CVD part... Very true... Esp the rear one....

I still wonder why 1/8 don't use '二樓版' as 1/10 ... Even a small narrow carbon or alloy.. On nitro, may be hard, but on electric, should be fine to locate....

作者: piranharowana 時間: 2013-11-18 19:41
師兄所提示之OP已買了

作者: piranharowana 時間: 2013-11-20 21:32
已完成，爭servo未裝

作者: choyip 時間: 2013-11-20 21:34

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)