RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: F103GT 3Racing & Tamiya Cross Over [打印本頁]

作者: jpmontoya2 時間: 2007-1-16 00:46
標題: F103GT 3Racing & Tamiya Cross Over
My F103GT with some option from both Tamiya and 3RAcing,

THe ideal will still be going for Tamiya parts, those one that were not produced by Tamiya will go with 3Racing....

Thanks for watching

作者: 觀星是答案 時間: 2007-1-16 00:47
成個車尾用晒 3Racing 金屬座吧 !

我以前架 F103GT ...

登錄/註冊後可看大圖

[ 本帖最後由觀星是答案於 2007-1-16 00:49 編輯 ]

作者: jpmontoya2 時間: 2007-1-16 00:54

原帖由 觀星是答案 於 2007-1-16 00:47 發表
成個車尾用晒 3Racing 金屬座吧 !

我以前架 F103GT ...

No la...i like the rear abit lighter...so far my car runs great..i have no intention to change to alloy at the rear la......:-)

作者: 觀星是答案 時間: 2007-1-16 01:44

原帖由 jpmontoya2 於 2007-1-16 00:54 發表

No la...i like the rear abit lighter...so far my car runs great..i have no intention to change to alloy at the rear la......:-)

我用合金 motor 座係因為佢耐撞一點
我去玩的是 .... 大窩口 "湯" 車場

by the way, 我發現架車行先返來之後, 成份金屬摩打座都是暖的
証明它也有助散熱

作者: S20002330 時間: 2007-1-16 10:09
個個架車都好靚呵
我想問問lock個轆個粒藍色大六角在那裡找的，我係"喂高"只係見到金色同紫色

還有我想問問3racing個頭轉向杯個高度係咪矮過原裝的

作者: 觀星是答案 時間: 2007-1-16 10:11

原帖由 S20002330 於 2007-1-16 10:09 發表
個個架車都好靚呵
我想問問lock個轆個粒藍色大六角在那裡找的，我係"喂高"只係見到金色同紫色
還有我想問問3racing個頭轉向杯個高度係咪矮過原裝的

藍色大六角在 KWS 有
去 RC Modxl 問下啦 !

作者: S20002330 時間: 2007-1-16 10:30
點解觀星兄要用有紋既呔既，唔通咬地d

作者: 觀星是答案 時間: 2007-1-16 10:34

原帖由 S20002330 於 2007-1-16 10:30 發表
點解觀星兄要用有紋既呔既，唔通咬地d

影相靚 o的 o者
拎去 "湯" 車場玩, 一定係用鑊仔拎 + 蘇力士啦

作者: S20002330 時間: 2007-1-16 10:39

原帖由 觀星是答案 於 2007-1-16 10:34 AM 發表

影相靚 o的 o者
拎去 "湯" 車場玩, 一定係用鑊仔拎 + 蘇力士啦

咩叫做"湯"車場呵
其實103用幾多度呔會比較好的

作者: jpmontoya2 時間: 2007-1-16 11:08

原帖由 S20002330 於 2007-1-16 10:09 發表
個個架車都好靚呵
我想問問lock個轆個粒藍色大六角在那裡找的，我係"喂高"只係見到金色同紫色
還有我想問問3racing個頭轉向杯個高度係咪矮過原裝的

頭轉向杯 is same as Tamiya~

作者: 觀星是答案 時間: 2007-1-16 11:24

原帖由 S20002330 於 2007-1-16 10:39 發表

咩叫做"湯"車場呵
其實103用幾多度呔會比較好的

"湯"車場 = 玩咩車都會死車收場的地方
103 用綿呔好啊 !

作者: S20002330 時間: 2007-1-16 13:49

原帖由 觀星是答案 於 2007-1-16 11:24 AM 發表

"湯"車場 = 玩咩車都會死車收場的地方
103 用綿呔好啊 !

咁幾多度膠呔好呀

作者: jpmontoya2 時間: 2007-3-6 00:23
My F103GT hopped up with some Lipo la~~~..

作者: rk2 時間: 2007-3-6 09:06
beautiful ! ~~ with Tamiya racing towel

作者: S20002330 時間: 2007-3-6 09:11

原帖由 jpmontoya2 於 2007-3-6 12:23 AM 發表
My F103GT hopped up with some Lipo la~~~..

請問個電上面個塊電子板係咩來嫁

你架車改得好靚

作者: jpmontoya2 時間: 2007-3-6 09:23

原帖由 rk2 於 2007-3-6 09:06 發表
beautiful ! ~~ with Tamiya racing towel

Thank you ~~

作者: jpmontoya2 時間: 2007-3-6 09:24

原帖由 S20002330 於 2007-3-6 09:11 發表

請問個電上面個塊電子板係咩來嫁
你架車改得好靚

That is a NOvak Smart Stop.....it helps to detect the voltage remains on the Lipo. When the voltage drops to a critical value, the Smart Stop will flash Blue...and if you keep running, the Smart Stop will stop the car to pretect the Lipo~

作者: rk2 時間: 2007-3-6 13:07
NOvak Smart Stop -- EXPENSIVE OR NOT ?

作者: jpmontoya2 時間: 2007-3-6 14:46

原帖由 rk2 於 2007-3-6 13:07 發表
NOvak Smart Stop -- EXPENSIVE OR NOT ?

around $240 la~

Check out with your local hobby shop~

作者: pat1111 時間: 2007-3-6 15:16
jpmontoya2 師

有無試過 ,個 smart stop 用番 Ni Mh 電?得唔得呢?
因個 smart stop 我以捍左去 ESC 度,當粒 lipo 無電時,想用ni mh 電玩.

作者: jpmontoya2 時間: 2007-3-6 15:18

原帖由 pat1111 於 2007-3-6 15:16 發表
jpmontoya2 師

有無試過 ,個 smart stop 用番 Ni Mh 電?得唔得呢?
因個 smart stop 我以捍左去 ESC 度,當粒 lipo 無電時,想用ni mh 電玩.

Umm..i have not try wor......becasue of the above reason...thats why u see my smart stop is solder as a seperate unit. I have batery flug and T-plug to hook it up. So if i am using NiMH i can take the smart stop away easily..

Can any other brother give him a help?

作者: rk2 時間: 2007-3-6 15:23
車上粒 led 有咩用架 ?

作者: jpmontoya2 時間: 2007-3-6 15:31

原帖由 rk2 於 2007-3-6 15:23 發表
車上粒 led 有咩用架 ?

When battery starts to go down and approaches the critical value of 6.25 V (if i remember correctly), the Blue LED will flash...indicating you are low on battery and advise you to stop playing.

However if you keep playing while the LED flashes, when the power drops below 6.25V, the smart stop will stop the car only leaving sterring function......

All that is doing is to pretect the Lipo being over discharge~

作者: pat1111 時間: 2007-3-6 15:38

原帖由 rk2 於 2007-3-6 15:23 發表
車上粒 led 有咩用架 ?

當電壓低會閃藍燈,再低去度6.25V 會長著

作者: jpmontoya2 時間: 2007-3-6 15:39

原帖由 pat1111 於 2007-3-6 15:38 發表

當電壓低會閃藍燈,再低去度6.25V 會長著

No..it will flash.....but the car simply stops....no power to the motor!

作者: pat1111 時間: 2007-3-6 15:44

原帖由 jpmontoya2 於 2007-3-6 15:18 發表

Umm..i have not try wor......becasue of the above reason...thats why u see my smart stop is solder as a seperate unit. I have batery flug and T-plug to hook it up. So if i am using NiMH i ca ...

又學到野喇...Thanks

之到點攪攪可以用二種電

作者: pat1111 時間: 2007-3-6 15:47

原帖由 jpmontoya2 於 2007-3-6 15:39 發表

No..it will flash.....but the car simply stops....no power to the motor!

icic

作者: jpmontoya2 時間: 2007-3-6 15:49

原帖由 pat1111 於 2007-3-6 15:44 發表

又學到野喇...Thanks

之到點攪攪可以用二種電

I do it this way,
I use a seperate connector between the Lipo batteries to the ESC. At this seperatte connector add another linakge for the smart stop.

Then the smart stop can be remove or replug whenever u are needed~

If you are uncertain, i maybe able to take another pic tonite on that subject~

作者: pat1111 時間: 2007-3-6 15:58

原帖由 jpmontoya2 於 2007-3-6 15:49 發表

I do it this way,
I use a seperate connector between the Lipo batteries to the ESC. At this seperatte connector add another linakge for the smart stop.

Then the smart stop can be remove o ...

明白點攪,我會係ecs 去電個T plug 加多一個細o既plug.個plug 去 smart stop 20G 紅黑線度.用lipo 就用 smart stop.唔用lipo 就 unplug .
當唔用smart stop 時 esc 條紅黑白線去番接收.

作者: orange00 時間: 2007-3-6 16:03

原帖由 pat1111 於 2007-3-6 15:47 發表

icic

And thanks Novak product designer, the steering control still availabe after motor power cut off.

作者: jpmontoya2 時間: 2007-3-6 16:04

原帖由 pat1111 於 2007-3-6 15:58 發表

明白點攪,我會係ecs 去電個T plug 加多一個細o既plug.個plug 去 smart stop 20G 紅黑線度.用lipo 就用 smart stop.唔用lipo 就 unplug .
當唔用smart stop 時 esc 條紅黑白線去番接收.

BINGO~~~~

作者: pat1111 時間: 2007-3-6 16:08

原帖由 orange00 於 2007-3-6 16:03 發表

And thanks Novak product designer, the steering control still availabe after motor power cut off.

this call smart stop ma

only stop motor not stop the steering

作者: pat1111 時間: 2007-3-6 16:11

原帖由 jpmontoya2 於 2007-3-6 16:04 發表

BINGO~~~~

如果張粒藍色 LED ,改做4 粒死火燈放車殼到.好唔好呢

作者: orange00 時間: 2007-3-6 16:17

原帖由 pat1111 於 2007-3-6 16:11 發表

如果張粒藍色 LED ,改做4 粒死火燈放車殼到.好唔好呢

相信servo會唔夠電

作者: pat1111 時間: 2007-3-6 16:21

原帖由 orange00 於 2007-3-6 16:17 發表

相信servo會唔夠電

我隻 servo 係 6V ,我諗應該夠.

作者: rk2 時間: 2007-3-6 17:39

原帖由 jpmontoya2 於 2007-3-6 15:31 發表

When battery starts to go down and approaches the critical value of 6.25 V (if i remember correctly), the Blue LED will flash...indicating you are low on battery and advise you to stop playing. ...

So this LED is a part of the Novark smart stop ?

作者: jpmontoya2 時間: 2007-3-6 17:44

原帖由 rk2 於 2007-3-6 17:39 發表

So this LED is a part of the Novark smart stop ?

yes...included..a very bright LED too~

作者: teddy1506 時間: 2007-3-23 19:26
我部f103gt 唔係係咪係街玩得多.......個原裝大齒輪有d牙都崩左......點算.....??

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)