RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: E-maxx Power Plant Upgrade [打印本頁]

作者: jpmontoya2 時間: 2007-1-17 17:20
標題: E-maxx Power Plant Upgrade
Has been planning on some other powerplant to replace the current Novak HV system. To do that, of course we need to buy something off from the web (or if you are good, you can DIY).

So here it is, almost 3/4 along of my program,...adding the harden steel idel gear, a Gorillamaxx Single Speed Gear box, a Trinity Wheelie bar, Gorillamaxx motor mount....just missing that final touch of the motor......

When the car is really ready to rock....and i shall hit FSY for a full test later this year~~

[ 本帖最後由 jpmontoya2 於 2007-1-17 17:22 編輯 ]

作者: Skyline 時間: 2007-1-18 07:48
Man, U almost have the whole truck rebuilt by yourself .....

作者: jpmontoya2 時間: 2007-1-18 09:34

原帖由 Skyline 於 2007-1-18 07:48 發表
Man, U almost have the whole truck rebuilt by yourself .....

I will see u at FSY brother~~~

作者: Skyline 時間: 2007-1-18 21:32

原帖由 jpmontoya2 於 2007-1-18 09:34 發表

I will see u at FSY brother~~~

okokokok .....

作者: jpmontoya2 時間: 2007-1-22 23:33
OK....FInally collect all the final pieces...

A China made Pletternberg Brushless motor, along with a 5mm Bore 32 pitch gear......its waiting for its virgin run now~~~~~

Everything is soooooo perfect~~

作者: toto 時間: 2007-1-29 14:40
請問e-maxx同e-savage分別大唔大,價錢差幾遠,part難唔難找,那個好??唔該

作者: orange00 時間: 2007-1-29 14:48

原帖由 toto 於 2007-1-29 14:40 發表
請問e-maxx同e-savage分別大唔大,價錢差幾遠,part難唔難找,那個好??唔該

以下為個人意見:
e-savage - 入門好車, 咩都唔駛攪差電行得
e-maxx - 都係入門好車, 但改裝潛力達150%. 即係可以丟曬所有原裝嘢. 丟唔係因為佢唔掂, 係某d人會將佢閒閒地推到極速60-80km/h, 更甚者會過百.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)