RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: sanwa 141 係唔係digital servo? [打印本頁]

作者: hkeast 時間: 2007-1-20 15:03
標題: sanwa 141 係唔係digital servo?
各位師兄,請問sanwa 141 係唔係digital servo??多謝指教.THX

[ 本帖最後由 Ken 於 2007-1-20 15:13 編輯 ]

作者: courel500 時間: 2007-1-20 15:34
SRM-141HRZ 0.07s 2.3Kg/cm 6V/Digital/金屬 EP 1/12, 1/18

作者: abcdefg 時間: 2007-1-20 15:46
唔係digital的~ 唔好插HRS用丫~ 會燒接收

作者: hkeast 時間: 2007-1-20 20:25
多謝各位師兄幫忙,咁查實係唔係digital servo呢??thx

[ 本帖最後由 hkeast 於 2007-1-20 20:29 編輯 ]

作者: benben 時間: 2007-1-20 20:34

原帖由 hkeast 於 2007-1-20 15:03 發表
各位師兄,請問sanwa 141 係唔係digital servo??多謝指教.THX

NO!

作者: hkeast 時間: 2007-1-21 18:58
再次多謝各位師兄指導,呢度提供嘅資料係Digita,咁睇sanwa 141應該係Digital servo lu.係唔係呢？？有冇其他師兄可証實吓呢？感激感激！！ http://www.rc-evo.com/m_newhand/hand031.html

作者: benben 時間: 2007-1-23 01:10
I don't think that information is 100% correct, AT LEAST Futaba says S9650 IS a digital servo. http://www.rc.futaba.co.jp/hobby_en/01_info/p_list.cfm?Menu1=3&TextF=9650&Gid=3&Submit=Search

U might try the servo on a digital system, eg. HRS. If the servo survives, it's digital.

If it fries, it's analog.

As simple as that.
However, if u fry yr servo, I don't think the Administrator will reimburse yr loss due to giving false information.
Good Luck. Pal

Disclaimer : I'm not responsible for any property damage or injury if u choose to experiment by yrself.

作者: tungkee 時間: 2007-1-23 01:23
點解在三和網頁找唔到SRM-141HRZ ，只係找到 SRM-141ALZ !!

作者: benben 時間: 2007-1-23 01:34
http://www.sanwa-denshi.co.jp/srm-141hrz

作者: AMAT 時間: 2007-1-23 09:17
人手抄寫,難免有錯~

有錯記得話我知,我會改返O的DATA~!

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)