RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 20+ old 新玩具 [打印本頁]

作者: fat_fat_cat    時間: 2014-6-19 17:37
標題: 20+ old 新玩具
Finial get one in good condition
作者: camlchris    時間: 2014-6-19 18:21
Parma Euro Panther – 1984 World Champion 1/12 Stock Class

欠左條尾 anti roll bar
作者: alanwhc    時間: 2014-6-19 19:12
本帖最後由 alanwhc 於 2014-6-19 20:05 編輯

Woo! 師兄頭像係巨靈神基地,正!


作者: kimihotin    時間: 2014-6-19 19:18
多佐個T插唔親!
作者: blueray    時間: 2014-6-20 11:20
鴨記千維板? 本土派
作者: fat_fat_cat    時間: 2014-6-20 11:34
alanwhc 發表於 2014-6-19 19:12
Woo! 師兄頭像係巨靈神基地,正!

You also got one?
Mine is cheap to get as the seller say one ufo and one carrier is missed and some parts inside is broken, but I discovered the missing parts is the 'broken' parts inside.

作者: fat_fat_cat    時間: 2014-6-20 11:35
blueray 發表於 2014-6-20 11:20
鴨記千維板? 本土派

No, the P on the FRP is stand for 'Parma' , orginal gar


作者: fat_fat_cat    時間: 2014-6-20 11:37
camlchris 發表於 2014-6-19 18:21
Parma Euro Panther – 1984 World Champion 1/12 Stock Class

欠左條尾 anti roll bar

like these ?

[attach]811162[/attach]
still searching

作者: emaxxyeung    時間: 2014-6-20 13:08
hard to found the rear anti roll bar
作者: alanwhc    時間: 2014-6-20 16:52
fat_fat_cat 發表於 2014-6-20 11:34
You also got one?
Mine is cheap to get as the seller say one ufo and one carrier is missed and so ...

係呀! 我都有儲幾款合金基地
作者: camlchris    時間: 2014-6-20 17:45
fat_fat_cat 發表於 2014-6-20 11:37
like these ?

Yes, this one

[attach]811219[/attach]

作者: m05car    時間: 2014-6-20 21:16
其實十二仔就係要這麼簡單就夠

作者: tiger1    時間: 2014-6-20 22:50
fat_fat_cat 發表於 2014-6-20 11:37
like these ?

Which body shell is this? I love this shell but I saw them in 1/8 only....
作者: fat_fat_cat    時間: 2014-6-20 23:50
camlchris 發表於 2014-6-20 17:45
Yes, this one

Woo, Ching can suggest when you get these?
作者: fat_fat_cat    時間: 2014-6-20 23:51
tiger1 發表於 2014-6-20 22:50
Which body shell is this? I love this shell but I saw them in 1/8 only....

Sorry, that's just a old pix, dunno the shell
作者: emaxxyeung    時間: 2014-6-21 00:01
tiger1 發表於 2014-6-20 22:50
Which body shell is this? I love this shell but I saw them in 1/8 only....

Elfin Can-Am body 1/12

作者: tiger1    時間: 2014-6-21 07:09
Yes, ELFIN!! Who made this? as said, I saw many in 1/8 size but hardly remember who made 1/12 Elfin before

作者: RGear    時間: 2014-6-23 09:55
emaxxyeung 發表於 2014-6-21 00:01
Elfin Can-Am body 1/12

I had one long long time ago, want to buy some now

作者: sfdo    時間: 2014-6-23 19:36
m05car 發表於 2014-6-20 21:16
其實十二仔就係要這麼簡單就夠

越簡單越可愛
不過我唔明佢尾座殼柱設計,裝殼會否對扭尾有大阻礙?


作者: sean2013    時間: 2014-6-24 23:06
sfdo 發表於 2014-6-23 19:36
係越簡單越可愛
不過我唔明佢尾座殼柱設計,裝殼會否對扭尾有大阻礙?

佢尾座殼柱設計絕對會扭不到尾且有大阻礙
作者: chacha    時間: 2014-6-24 23:49
呢類設計,當年應該係開大小小,但係唔可以大過拓殼舊膠,其實個尾有幾大動作呢!
作者: macau-rc    時間: 2014-7-4 08:51
Mine





歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2