RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: KO EX-10 HELIOS SETTING [打印本頁]

作者: JKC710 時間: 2014-6-29 16:11
標題: KO EX-10 HELIOS SETTING
今日咁岩睇到KO US WEBSITE內容如下, 請問各位用EX-10 HELIOS既師兄係咪都係跟以下SETTING?

2.4GHz ASF Settings
Setting up your 2.4GHz Kyosho Mini-Z with any of our supported KO brand transmitters with modules, you will need the following settings.

Set the steering Travel

登錄/註冊後可看大圖
to 70 or 70%.
Set the steering Balance to NO MORE then 70%.
Set the throttle High Point to 60.
Set the throttle Brake to 60.
DO NOT use the Quick Steering or Quick Throttle Response found in the EX-1 UR transmitter.

These settings for your transmitter will help to ensure that you 2.4GHz Mini-Z will operate correctly.

http://kopropo.com/america/support/mini-z-help-center/

作者: d.s 時間: 2014-6-29 16:27
可以先跟足，到時邊樣唔夠再慢慢加

作者: JKC710 時間: 2014-6-29 16:32

d.s 發表於 2014-6-29 16:27
可以先跟足，到時邊樣唔夠再慢慢加

明白, 但係加左會唔會有其他問題?

作者: d.s 時間: 2014-6-29 16:38
慢加唔會有問題

作者: JKC710 時間: 2014-6-29 16:56

d.s 發表於 2014-6-29 16:38
慢加唔會有問題

請問你地setting會大約係幾多%??
我原setting 油門hi-point去到150%

作者: d.s 時間: 2014-6-29 21:07
我hi point 100

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)