leadImage.jpg (71.9 KB, 下載次數: 16)
2014-7-9 22:56 上傳
配合 DX5e DX6 DX6i DX7s DX8 或 DX9 1 Bind 即飛
去片:
1. The Blade® 350 QX
2. Blade 350 QX Aerial Photography
3. Blade 350 QX Unboxing, Assembly and Startup
4. Copper Shield Install Instructions - Blade 350 QX (This copper shielding prevents unwanted RF emissions from interfering with the GPS performance of the 350 QX.)
內置 GPS (一鍵回航) / 穩定 mode (合航拍) / 敏捷 mode (花式飛行)
重點更新:
更安全 SAFE CIRCLE™ - 不會埋身
Altitude and GPS Lock and Self-Leveling
Compass and GPS Error Detection
原文: Firmware 2.0 Features
[size=1.2em]The Blade® 350 QX quadcopter has been updated with Firmware 2.0 to provide the best experience. This firmware update facilitates a new flight mode configuration as well as a refined starting procedure. Additionally, the firmware update improves GPS and compass performance during preflight and flight.
Refined Start Procedures
There are now two options to start the motors:
There are now two options to start the motors:
- Pilots can now move both sticks into the bottom inside corners to start the craft.
- Left-right-center procedure remains active as well.
New Flight Mode Configuration
- Smart Mode: Stick Relativity, SAFE® Circle feature, Altitude and GPS Lock and Self-Leveling
- AP Mode: Altitude and GPS Lock with soft Self-Leveling
- Stability Mode: Self-Leveling, GPS Lock
- *Agility Mode: Only available with Spektrum™ DX6i or higher transmitters (Endpoint adjustment is necessary)
Compass and GPS Error Detection
The Firmware 2.0 update prevents GPS and compass errors from causing adverse flight conditions. The status LED blinks orange if the compass senses a magnet or metal object nearby.
The Firmware 2.0 update prevents GPS and compass errors from causing adverse flight conditions. The status LED blinks orange if the compass senses a magnet or metal object nearby.
New Charger
This version comes with a new 12V DC accessory charger that plugs into a 12V auxiliary power port, like the one found in your car. This charger functions exactly the same as the original charger but has a 12V DC accessory power connector instead of DC alligator clips.
This version comes with a new 12V DC accessory charger that plugs into a 12V auxiliary power port, like the one found in your car. This charger functions exactly the same as the original charger but has a 12V DC accessory power connector instead of DC alligator clips.
| 歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) | Powered by Discuz! X3.2 |