RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: MO3 Problem [打印本頁]

作者: Evo5 時間: 2007-1-26 01:06
標題: MO3 Problem
Can any brother tell me how to make it run in a straight line ?
WHen I full chicken, the car dean ha dean ha to left and right !
THX !

作者: Tim 時間: 2007-1-29 04:19
Are you using the 2 degree toe in rear uprights? they help to give straight line stability.
If you are using them already then try adjusting the toe on the front wheels, if the front wheels have toe out the car will turn quickly, but can wander (go side to side) on the straights, if you have toe in the car will turn slower, but should go straight.

作者: Evo5 時間: 2007-1-29 12:38
2 degree toe in rear uprights......IC
I am using standard now !
where i can get the 2 degree toe in rear uprights ?
and how much pls ?

作者: kaho0338 時間: 2007-1-29 12:51

原帖由 Evo5 於 2007-1-29 12:38 發表
2 degree toe in rear uprights......IC
I am using standard now !
where i can get the 2 degree toe in rear uprights ?
and how much pls ?

use m03m F part from tamiya.......kws about $3x-40

there are new c hub too

[ 本帖最後由 kaho0338 於 2007-1-29 12:53 編輯 ]

作者: Evo5 時間: 2007-1-29 12:53
F parts is rear or front ? plastic ?

作者: kaho0338 時間: 2007-1-29 12:55

原帖由 Evo5 於 2007-1-29 12:53 發表
F parts is rear or front ? plastic ?

rear + front, plastic
f part include : 新c 座, 新轉向, 後2度杯, m03m 加長件

登錄/註冊後可看大圖

作者: Evo5 時間: 2007-1-29 13:00
IC !!!!!
THX !
Sounds great !

作者: Tim 時間: 2007-1-30 05:13
M03M F parts are good because the front uprights are a lot stronger ... but you will also need to buy the new bearings to suit - 8x 1050 bearings are needed to use the F parts.

If you already have bearings on your M03 and just need 2 degree rear toe in, you can buy 53345 TL01/M03 rear uprights.

作者: Evo5 時間: 2007-1-30 11:49

原帖由 Tim 於 2007-1-30 05:13 AM 發表
M03M F parts are good because the front uprights are a lot stronger ... but you will also need to buy the new bearings to suit - 8x 1050 bearings are needed to use the F parts.

If you already h ...

Oh thx ! MATE !

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)