RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: tt02b ~ ecs [打印本頁]

作者: epc_mem 時間: 2014-10-2 00:09
標題: tt02b ~ ecs
原來跟車已是 TBLE-02S, 想請問有冇師兄試過用 tp 風扇黑豬可以嗎？

作者: george519 時間: 2014-10-2 00:21
可以, 一定得

作者: 965 時間: 2014-10-2 00:49
It comes with sensored esc already?

作者: epc_mem 時間: 2014-10-2 06:58
謝謝師兄回應。
呢個 esc 係兩用的。

作者: 965 時間: 2014-10-3 09:50
How come my TT02b only come with brushed esc?

The it is good deal wor .. it is $700 ... the sensored brushless esc probably worth that!

作者: epc_mem 時間: 2014-10-3 11:45
呢期有新款仲正！

作者: epc_mem 時間: 2014-10-3 11:49
http://www.rcmart.com/advanced_s ... 266&x=0&y=0

作者: 965 時間: 2014-10-4 00:39
Ding... buy my TT02B too early... bought jor few month ... still not build yet... even it looks like a "entry" level esc (up to 7.2v? not 7.4?) but it is a sensored! pair it with a 13.5t should work great with TT02B!

作者: epc_mem 時間: 2014-10-4 09:03
good !

作者: 電梯痴漢 時間: 2014-10-6 13:44

epc_mem 發表於 2014-10-3 11:49
http://www.rcmart.com/advanced_search_result.php?keywords=058528+or+058283+or+058266&x=0&y=0

師兄,呢款同這款有什麼分別?
http://www.rcmart.com/tamiya-585 ... html?cPath=420_1167

作者: 965 時間: 2014-10-6 14:54
本帖最後由 965 於 2014-10-6 14:56 編輯

That is older (earlier) version... with old brushed esc ..

New one is cheaper, and with brushless (sensored!) esc!

But I kind of like the yellow shocks more ..

作者: rowrowdog 時間: 2014-10-6 18:06
Do we need to use Tamiya brushless motor to match with this ECS? or any brand will do? Thanks.

作者: epc_mem 時間: 2014-10-6 20:26

電梯痴漢發表於 2014-10-6 13:44
師兄,呢款同這款有什麼分別?
http://www.rcmart.com/tamiya-58568-tt02b-scorcher-wesc-p-37028.html?cPa ...

我是買這部的 ~

作者: epc_mem 時間: 2014-10-6 20:27

965 發表於 2014-10-6 14:54
That is older (earlier) version... with old brushed esc ..
New one is cheaper, and with brushles ...

我是買這部的 ~

作者: epc_mem 時間: 2014-10-6 20:28
本帖最後由 epc_mem 於 2014-10-9 16:49 編輯

rowrowdog 發表於 2014-10-6 18:06
Do we need to use Tamiya brushless motor to match with this ECS? or any brand will do? Thanks.

唔肯定, 因為無 brushless, 所以無得試 ~ 不過十卜去到 10.5 T

作者: 電梯痴漢 時間: 2014-10-9 15:53
我想問下各位師兄,呢部車行9.5T摩打得唔得,要唔要換齒比?原裝摩打齒好似係17T

作者: 電梯痴漢 時間: 2014-10-9 15:53
大減係70T

作者: epc_mem 時間: 2014-10-9 16:48
原裝摩打齒係17T, 不過我用黑豬, 所以不清楚.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)