標題: 新手13.5T no turbo in JV [打印本頁] 作者: hsukoonyuen 時間: 2014-11-9 23:16 標題: 新手13.5T no turbo in JV any new player with stock motor want to play at JV on weekend?
anyone can recommend a setting to start with on ESC in terms of brake force, punch, drag brake?
also camber and toe in setting for front and rear?作者: brianych 時間: 2014-11-9 23:23
Which brand ESC and Model of car ?作者: kkchung 時間: 2014-11-9 23:59
一般玩 Blinky 齒比約 4.0 左右，馬達一定要加上如 MuchMore 40x40mm 大風扇給馬達冷卻。電變 Punch 基本推至最大。Drag Brake 可能較輕，看你需要而調整。
前後 Camber、Toein/out 沒有一定，要看你不同車架、輪胎等而變化。 Camber 一般在-2以內。前 Toe out 1左右尾 in 3度以內。呔水用 Team Powers V2 便可。呔看玩時地面温度選擇，現時一般很冷時晚上 用28度胎 至 中午極熱時40度胎 也有可能。40、36及28各一組選擇使用。作者: hsukoonyuen 時間: 2014-11-10 17:31
thx for your advise kk作者: kelvinayhh 時間: 2014-11-10 17:42
齒比4.2左右，起步會有力d，punch set最大，drag brake set 0%，brake force 10%，intial brake set =drag brake，一定要落40mm風扇
呢個係我之前試過係jv比較好跑嘅setting作者: hsukoonyuen 時間: 2014-11-10 17:49
thx Kavin作者: hsukoonyuen 時間: 2014-11-10 17:50
i will try to use the recommend setup in JV next week will see how it goes作者: hsukoonyuen 時間: 2014-11-10 18:42
just one more question do u guys consider JV as high traction or low traction course? i dont exactly know what difference the traction means for driving...作者: Yokomo-MST 時間: 2014-12-11 17:49