RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 我的REVO [打印本頁]

作者: _LOK_ 時間: 2014-11-11 23:17
標題: 我的REVO
小弟的1/16 revo...試車前影番兩張先^^

作者: Mahosing 時間: 2014-11-11 23:35
條呔好正，可以係邊買呀！？
仲有加長臂，超正！

作者: sticker 時間: 2014-11-12 01:11
條呔好正，可以係邊買呀！？X2

作者: 965 時間: 2014-11-12 02:36
Is that longer arms? look same length .. I got the same/similar set up .. those r Proline bead loc .. very heavy ... (I took the metal ring off, much better ..

)

作者: Annie268 時間: 2014-11-12 06:49
So good...

作者: _LOK_ 時間: 2014-11-12 09:08
proline bead loc, rcmart買的…呢set呔好鬼貴…

作者: _LOK_ 時間: 2014-11-12 09:09
20mm extention來的…

作者: cyt2011 時間: 2014-11-12 09:26
Ching, 呢set呔係咪唔洗用膠水架 ?

作者: kennethgo 時間: 2014-11-12 09:31
V good.

作者: yuenwai 時間: 2014-11-12 21:32
都係喜歡原裝車壳.

作者: gimsink 時間: 2014-11-13 07:28
係咪加長adaptor 行17mm六角 ? 套拎全金屬，如果係就好重，拖慢架車，不過真係型到冇街方！！

作者: DLAM 時間: 2014-11-13 09:55
好型! 不過Bead Lock鈴有時揸得太狠會甩呔

作者: 965 時間: 2014-11-13 14:00

gimsink 發表於 2014-11-13 07:28
係咪加長adaptor 行17mm六角 ? 套拎全金屬，如果係就好重，拖慢架車，不過真係型到冇街方！！ ...

Regular 12mm .. and lots of offset already .. (width almost longer then wheelbase .. ) and yes, they are DAMN heavy .. those rims are still plastic, but the "RING" is metal, just for look ... the Metal ring is heavier then the rim itself!! Dual servo (or upgraded servo) is a must!
I took the metal rings off .. but hassle .. so I just took off both front rings ..

登錄/註冊後可看大圖

作者: cyt2011 時間: 2014-11-13 14:15
Glue is necessary without the "ring" ?

作者: _LOK_ 時間: 2014-11-13 21:25
唔使膠水的

作者: cyt2011 時間: 2014-11-13 23:59
其实條呔尺寸有幾大？

作者: 965 時間: 2014-11-14 01:14
本帖最後由 965 於 2014-11-14 01:15 編輯

http://prolineracing.com/tires/d ... us-bead-loc-wheels/

Full info. : )

Pre-glue from factory already...

作者: _LOK_ 時間: 2014-11-14 17:24

965 發表於 2014-11-13 14:00
Regular 12mm .. and lots of offset already .. (width almost longer then wheelbase .. ) and yes, th ...

I agree dual servo is a must....XDXD

作者: 965 時間: 2014-11-14 17:53
Yeah... I got mine upgraded to dual servo... But then my other mini rally servo toasted, so I took one servo out to just subsidize ... Then I bought a mini servo back....and I don't know where I put the servo horn and parts....

作者: iao 時間: 2014-11-16 08:53
車底果塊膠，哪裡有售？

作者: pbus 時間: 2014-11-16 09:26
so nice!

作者: _LOK_ 時間: 2014-11-17 18:18
www.thetoyz.com

作者: iwant2watch 時間: 2014-11-17 22:28
C~hing
Modified 到咁靚，真係会吾捨得玩喔!我都有玩，少改後就變了觀賞車了，要擇日出去跑跑!嘿嘿…
借問声去边處玩多，有冇好介紹呢?
謝謝

作者: _LOK_ 時間: 2014-11-18 07:57
其實無乜點改的, 係個殼型仔姐...XDXD
暫時我都係係屋企樓下同埋去土瓜灣同fd跑爛地ja...

作者: 965 時間: 2014-11-18 12:17
本帖最後由 965 於 2014-11-18 12:18 編輯

I wanted a new (diff) body for my Mrev too .. your Mrevo looks great! Stock body is kind of boring ..

Kind of like the Mini Losi more .. (but Traxxas is so easy and cheap to get parts!)

登錄/註冊後可看大圖

(sorry for hi jack ...

)

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)