RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: traxxas slash [打印本頁]

作者: terrytse    時間: 2015-1-28 12:46
標題: traxxas slash
May I know which model of battery can use on the slash 4x4? I wanna try 3s....asked a few shops in KWS but seems no....


作者: DLAM    時間: 2015-1-28 13:53
Most of the 3S batteries will fit if you use the Option Battery Hold Down Retainer

http://www.amain.com/traxxas-battery-hold-down-retainer/p26644

If not, you can find some thin 3S batteries below 5000mah, like 4200mah Lion battery from Taobao, it should do it.
作者: terrytse    時間: 2015-1-28 13:58
thanks!!!
作者: 965    時間: 2015-1-28 15:40
Yeah .. most standard size 3s will fit ..

But ..  Slash with 3s (if stock vxl system) ...  make sure you have all the drivetrain upgrade .. if you have the LCG .. don't dump too hard ..
作者: terrytse    時間: 2015-1-28 16:28
sorry I am a newbie....can u specific which part i need to upgrade?

I just orderd from rc mart of the following

1 x          *Yeah Racing RC Ball Bearing Set with Bearing Oil For TRAXXAS Slash 4X4 RTR/Platinum/Ultimate 6808/6         USD$14.90
1 x          *Yeah Racing Steel Hard Front Wheel Axle Upgrade Set for Traxxas Slash 4x4 #TSL-115F2BK         USD$11.90
1 x          *Yeah Racing (#TSL-007DB) Aluminum Rear Hubs Set (DB) for Traxxas Slash 4x4 SCR RTR         USD$9.90
1 x          Traxxas (#5827X) Battery Hold Down for Slash Truck         USD$5.40
1 x          *Yeah Racing (#TSL-006DB) Aluminum Knuckle Arm Set/Steering Blocks (0 degree) (DB) for Traxxas Slash         USD$9.90


what else I need to upgrade???
作者: terrytse    時間: 2015-1-28 16:35
https://www.youtube.com/watch?v=Oxrw7QiV4Ik&feature=youtu.be


作者: Mahosing    時間: 2015-1-28 18:08
好正呀!呢度係邊度黎?
作者: terrytse    時間: 2015-1-28 18:33
weekday in cyberport
作者: 細細保    時間: 2015-6-17 20:02
師兄 我都係玩traxxas 大E 想找人一起玩 有興趣就加我


作者: _LOK_    時間: 2015-6-22 07:24
terrytse 發表於 2015-1-28 16:28
sorry I am a newbie....can u specific which part i need to upgrade?

I just orderd from rc mart of t ...

師兄所講的upgrade例如係 轉向杯, Front + Rear Hub, Axle,  Slipper clutch, CVD, motor mount,A臂 等等同制動有關的parts, 因一上3S真係大力好多, 好易撞爛的...
如果有budget可以換埋 ,sway bar, 避震, 去加強架車handling...波箱, bearing可以玩住先, 玩爛先換都得...
我近排都改緊架山鼠做LCG slash...有機會可以交流下






歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2