RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Which Brushless ESC is better? [打印本頁]

作者: GigaRacer 時間: 2007-2-20 16:08
標題: Which Brushless ESC is better?
Brushless is the way to go....

Novak, LRP, Tekin....etc. Which one is better??

作者: 老人家 時間: 2007-2-20 16:12
Tekin OR Novak

作者: GigaRacer 時間: 2007-2-20 16:34
標題: 回復 #2 老人家的帖子
Thought about Novak since I am going to get Novak motor.... but don't like the fan, the size, and it doesn't support Lipo.

Tekin's spec looks good. Is it on the market yet? Does it support Novak's motors?

作者: 老人家 時間: 2007-2-20 16:44
其實都係那句話無刷玩意未成熟 , 站時在匹配上最好MATCH , 無刷玩Lipo你想玩拉力賽 ? 無刷看來在短期內會有很多改動及進行和兼容空間 , 忍耐一下啦

作者: i-Drift 時間: 2007-2-20 17:31

原帖由 GigaRacer 於 2007-2-20 16:34 發表
Thought about Novak since I am going to get Novak motor.... but don't like the fan, the size, and it doesn't support Lipo.

Tekin's spec looks good. Is it on the market yet? Does it support Nov ...

Novak can use Lipo. Just need to add another small device. $200

作者: 老人家 時間: 2007-2-20 17:39
本想細而輕 , 加多件small device有否背道而馳 , 不過無刷及 Lipo 確有引人至處

作者: i-Drift 時間: 2007-2-20 17:48

原帖由 老人家 於 2007-2-20 17:39 發表
本想細而輕 , 加多件small device有否背道而馳 , 不過無刷及 Lipo 確有引人至處

我估你未見過實物. 超細, 超薄, 超輕, 唔會太大影響.

作者: 老人家 時間: 2007-2-20 17:50
是否原廠Novak出品

作者: pat1111 時間: 2007-2-20 17:58

原帖由 老人家 於 2007-2-20 17:50 發表
是否原廠Novak出品

係:
3 SMART-STOP Li-Po CUT-OFF MODULES

http://www.teamnovak.com/

作者: i-Drift 時間: 2007-2-20 18:00
係 Novak 出. 10g 左右重.

作者: 老人家 時間: 2007-2-20 18:03
原裝廠製 , 細 , 蒲 , 輕 , 靠得住

pat1111 兄 THANK YOU VERY MUCH

作者: gibson209 時間: 2007-2-20 18:20
加個SMART-STOP Li-Po CUT-OFF MODULES可防止放乾舊鋰電.如個唔係好易瓜柴

作者: pat1111 時間: 2007-2-20 18:31

原帖由 老人家 於 2007-2-20 18:03 發表
原裝廠製 , 細 , 蒲 , 輕 , 靠得住 pat1111 兄 THANK YOU VERY MUCH

客氣客氣.

唔算太貴,KWS $240.

作者: GigaRacer 時間: 2007-2-21 03:26
標題: 回復 #4 老人家的帖子
I should wait??

But I really don't want to buy the comm cutting machine.

Yesterday, on the track, people's 27T faster than my 19T because my motors are getting old.. need to cut/true the comm

Just thought brushless can solve all the headache...

作者: Motorman 時間: 2007-2-21 04:31

原帖由 GigaRacer 於 2007-2-21 03:26 AM 發表
I should wait?? But I really don't want to buy the comm cutting machine.

Yesterday, on the track, people's 27T faster than my 19T because my motors are getting old.. need to cut/true the c ...

This one is good, just received it.

: 登錄/註冊後可看大圖

作者: GigaRacer 時間: 2007-2-21 05:08
標題: 回復 #15 Motorman 的帖子
Bro Motorman,

I know, and I almost bought this.... but then I found that only Novak are allowed for race. 13.5R in 27T class, and 10.5R in 19T class. Mamba is a "non-sensor" ESC, so it doesn't work with Novak ESC.

From spec, I like the Tekin, but seems no one has it yet. Even their website only have drawing pictures, not the real product.

作者: LeoChan 時間: 2007-2-21 06:54
Mamba Max is fast , but need use notebook setup !

or wait more 10 days will arrive TEKIN new series brushless Esc ,
support all brushless motor ( sensor less & sensored )

作者: GigaRacer 時間: 2007-2-21 07:04
標題: 回復 #17 LeoChan 的帖子
10 days? Yes, I can wait.

BTW, I also found Novak is coming out a whole new series of brushless system with their new SS10.5pro or SS13.5pro with their GTB ESC. And they stated that those are ROAR legal

[ 本帖最後由 GigaRacer 於 2007-2-20 15:07 編輯 ]

作者: Motorman 時間: 2007-2-21 07:33

原帖由 GigaRacer 於 2007-2-21 05:08 AM 發表
Bro Motorman,

I know, and I almost bought this.... but then I found that only Novak are allowed for race. 13.5R in 27T class, and 10.5R in 19T class. Mamba is a "non-sensor" ESC, so ...

Tekin is also sensorless but much expensive than Mamba......... and Tekin have smaller size too.

ROAR events only allow Novak and LRP BL system currently........ if you are not planning to participate any ROAR event recently, buying sensorless is better than sensor one. Also, ROAR will allow sensorless to race very soon. Mamba guys are working with them on the regulations now.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)