RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 我部ta04有問題 [打印本頁]

作者: 海畢 時間: 2007-2-28 00:37
標題: 我部ta04有問題
我部ta04最近換了前帶尾帶串住果條軸(齒) , 因為之前的撻左 , 今日玩車 , 無啦啦轉彎都可以打白鴿轉and飄移

我唔sure係前後果餅差速兩邊散左(要換) , 因為我試過之前都係打白鴿轉 , 係尾係尾差(餅)要換 , 不過我換前帶

尾帶串住果條軸(齒)之前 , 架車有問題 , check過哂 , 後尾先知前帶尾帶串住果條軸(齒)撻了 , 有冇師兄教我原因

唔該

仲有我放部車係地下轉左(靜止的時候) , 之後放番轉向 , 個轉向servo有回中 , 但係回一半到 , 咁係咪要換轉向servo

轉左同轉右都係咁樣唔該

作者: tc3driver 時間: 2007-2-28 23:29
標題: 回復 #1 海畢的帖子
Since the original center gear is made of plastic, so it is easily worn out.

For the problem of servo failure to return to center position,
1) Pls check whether the servo screw is too tight, if yes, lossen it a few turns or remove any 介子
Or
2) Check whether the steering parts are too tight by removing the servo, and then see whether the steering parts can be moved freely, if not, then check your steering parts.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)