RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Want to buy a M Car... M03 or M04? [打印本頁]

作者: GigaRacer 時間: 2007-3-2 09:17
標題: Want to buy a M Car... M03 or M04?
Which one is more fun to play?

M03/M03M

or

M04

M04 come with what kinds of body?

作者: Tim 時間: 2007-3-2 10:42
M03 is easier to drive and easier to set up.

M04 requires better throttle control to drive fast and more time to get a good setup.

M03 has the most amount of bodies available, but nearly all of the M04 bodies will fit the M03 with some minor tweaks - I have an M03M with Alfa body

M04 has these bodies, Alfa, S2000, Z3, MX5 and now the Beetle.

作者: GigaRacer 時間: 2007-3-2 15:14
標題: 回復 #2 Tim 的帖子
Alfa? Any picture?

I am thinking to use it for TCS (Tamiya Race). So, front wheel drive better than rear wheel drive??

作者: kaho0338 時間: 2007-3-2 15:20

原帖由 GigaRacer 於 2007-3-2 15:14 發表
Alfa? Any picture?

I am thinking to use it for TCS (Tamiya Race). So, front wheel drive better than rear wheel drive??

又冇話邊部特別好......set 得唔好, 揸得唔好乜都死...
只可以話你知m03 比m04 更易set, 更易揸....如果你m04 set 得好, 好勁的

作者: GigaRacer 時間: 2007-3-2 15:39
標題: 回復 #4 kaho0338 的帖子
so, for a M03M, what do I need to change?

作者: kaho0338 時間: 2007-3-2 15:49

原帖由 GigaRacer 於 2007-3-2 15:39 發表
so, for a M03M, what do I need to change?

if for tamiya race.........just change bearing, Universal Shaft, damper, ball diff, f201 20 teeth (hard) ...that's it !
and all must be tamiya items

[ 本帖最後由 kaho0338 於 2007-3-2 15:55 編輯 ]

作者: GigaRacer 時間: 2007-3-2 16:02
標題: 回復 #6 kaho0338 的帖子
what is f201?

作者: kaho0338 時間: 2007-3-2 16:12

原帖由 GigaRacer 於 2007-3-2 16:02 發表
what is f201?

F201 is a formula car from tamiya.....m03/m03m can use the f201 20 teeth (because f201 20 teeth is much harder then the original m03/m03m 20 teeth)

作者: GigaRacer 時間: 2007-3-2 16:18
標題: 回復 #8 kaho0338 的帖子
icic, great info. thanks!

作者: GigaRacer 時間: 2007-3-4 16:26
標題: 回復 #9 GigaRacer 的帖子
how about using the new Beetle to race?

作者: GigaRacer 時間: 2007-3-8 09:19

原帖由 kaho0338 於 2007-3-2 00:12 發表

F201 is a formula car from tamiya.....m03/m03m can use the f201 20 teeth (because f201 20 teeth is much harder then the original m03/m03m 20 teeth)

I am getting a M03. I found the 20T from f201, but it's 06 teeth? That's what in the M03? Besides, what types should I use for TCS?

Thanks!

作者: Tim 時間: 2007-3-8 11:45
06 is the pitch of the teeth, you don't need to worry about it, the F201 20T hardened pinion will fit any M03 - no problem! Great for TCS!

If you use the new beetle to race it is M04L, harder to setup and drive, M03 much easier.

By the way, are you running on carpet or ashphalt?
I run on ashphalt, and M03 is easier to drive and on most tracks faster.
But, I have friends in Singapore who told me M04 is faster on carpet.

作者: GigaRacer 時間: 2007-3-9 09:08
標題: 回復 #12 Tim 的帖子
Our TCS will be racing in a parking lot. Should I use 60D? Warm weather.

作者: kit912 時間: 2007-3-11 19:54
係呢,m04買番黎果陣會唔會跟埋bearing?

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)