RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Question about Spektrum [打印本頁]

作者: yokomo 時間: 2007-3-13 09:19
標題: Question about Spektrum
I got a problem about the Binding Process of Spektrum 2.4G.

I followed the manual as follows:

1. Turn on the receiver while pressing the bind buttom.
2. Then turn on the transmitter while pressing the bind buttom

So bad, the receiver's LED just keep on flashing but no response.

Any brother can tell me the above step is correct or not. If not, please tell me the proper way.

Thanks !!

作者: jaos 時間: 2007-3-13 11:20
標題: 回復 #1 yokomo 的帖子
Set the transmitter to PPM mode and try again

登錄/註冊後可看大圖

作者: yokomo 時間: 2007-3-13 12:18
thx for your suggestion.

I am now using M8 & it is FM.

作者: schumacher 時間: 2007-3-14 13:15
Second hand or brand new?

作者: yokomo 時間: 2007-3-14 14:38
brand new.

作者: loman 時間: 2007-3-14 14:47
中文

1). 按住receiver個制唔好放開手然後開電變開關, 個receiver會閃燈, 然後立即按住module個制唔好放開手然後開搖控開關, 然後等大約幾秒, 個receiver 和module 既燈會一齊亮起唔會再閃, 咁就已經binding 成功. 我新買時都搞左好耐先得, 祝你好運

作者: yokomo 時間: 2007-3-14 18:21
標題: 回復 #6 loman 的帖子
Thanks a lot !!

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)