原帖由 2slow 於 2007-3-15 10:55 發表
1) Where can I buy the AD band PCB only? how much?
2) Does it comes with power switch and VR?
3) Can I install it to AWD?
唔該各位師兄...
原帖由 billy86che 於 2007-3-15 11:01 發表
1. KWS at about $6XX. (has become more expensive)
2. Yes.
3. Yes, but with some modification.
原帖由 2slow 於 2007-3-15 11:06 發表
1. only PCB without the module? what about PCB with AD module?
3. what modifications is needed? can you describe it or show some photo?
Thanks...
原帖由 billy86che 於 2007-3-15 11:13 發表
1. Without module still costs us $6XX.
3. Remove or move the white plug installed on the pcb(used to connect to computer).
原帖由 2slow 於 2007-3-15 11:19 發表
1. what about PCB with module then, which shop in KWS have it?
3. White plug for connecting computer? so that means I can't tune it anymore?
Many thanks billy86che
原帖由 billy86che 於 2007-3-15 11:23 發表
1. In the old days, also $6XX. (It is nonsense.) Haven't seen it recently.
3. You an re solder it on the back of the PCB or you can wire it out and fit in at the rectangular hole on the cha ...
原帖由 tonytjia@zone 於 2007-3-15 11:52 發表
萬里有AD PCB賣 價大約$5xx
極速 AD PCB + Module + AD Band Crystal 價$700
我會建議你買 ADPCB + Module + AD Band Crystal 因為祇係$700
ADPCB 有VR, Servo motor 及開關
如果你要裝向AWD度要改長開關 ...
原帖由 2slow 於 2007-3-15 11:56 發表
KWS有無shop可以幫我裝呢?
Thanks
歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) | Powered by Discuz! X3.2 |