標題: Mini z MR 03 壞車問題 [打印本頁] 作者: leetakr 時間: 2016-6-26 23:27 標題: Mini z MR 03 壞車問題 Mini z壞車問題：朋友架Mr 03 ,個原裝控控制唔到架車。架車一開就自動開著向後，要按油門向前才停。轉向又側埋一邊轉右轉唔到左。點算？？作者: Motul 時間: 2016-6-26 23:54
未必係壞，油門可能錯左中位，轉向可能掉轉左轉向摩打線作者: leetakr 時間: 2016-6-27 01:58
How to reset please ?thx作者: 路基亞 時間: 2016-6-27 03:31 http://www.rcfans.com/forum.php? ... able&tid=503983
睇下關唔關事作者: volvo9 時間: 2016-6-27 13:15
To reset KT19 transmitter:
(1) Turn off the transmitter if it is on.
(2) Make sure that the steering trim knob is at the center position
(3) Turn the G.SPD L knob fully to the counterclockwise direction.
(4) Position of G.SPD H knob does not matter.
(5) Turn the steering wheel to the fully right position and push the throttle away to the full-brake position and hold them.
(6) Turn on the transmitter. The LED should flash rapidly; this means you are now in the factory mode.
(7) Release the steering wheel and throttle lever.
(8) Turn the steering wheel fully to the left, right, left and right, and then release it.
(9) Pull/push the throttle lever to full-throttle, full-brake, full-throttle, and full-brake, and then release it.
(10) Turn the G.SPD L knob to the right most position. The LED should become solid.
(11) Turn off the transmitter and on it again. You are done. 作者: leetakr 時間: 2016-7-11 01:47
攪店啦!多謝大家幫忙")