RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: M03 + TA05 dampers [打印本頁]

作者: GigaRacer 時間: 2007-3-30 02:31
標題: M03 + TA05 dampers
I am going to use the plastic oil dampers from TA05 on my M03. To lower the M03, how many O-Ring should I use in each damper?

Thanks!

作者: aydinkao 時間: 2007-3-30 10:57

原帖由 GigaRacer 於 2007-3-30 02:31 發表
I am going to use the plastic oil dampers from TA05 on my M03. To lower the M03, how many O-Ring should I use in each damper?

Thanks!

at least 2 O-Ring
for lower ride height add 1 spacer
I just did that you going to do

作者: Tim 時間: 2007-3-30 11:10
I use 2 kinds of shock setup for my mini:
Super mini CVA, standard kit oil, 3 hole piston, 4 o-rings inside, yellow spring frt, red rear.
Some tracks this setup will cause the rear end to hop, or else cause a traction roll.

So then I switch to my other shock setup:
TRF fluorine dampers, standard kit oil, 3 hole piston, 1 o-ring inside, super short springs (old fluro colours) yellow frt and red rear. Then adjust ride height for the tires with the threaded TRF damper. Thread all the way up for 60D, then thread maybe 2-3mm down for smaller tires.

作者: GigaRacer 時間: 2007-3-30 15:14
標題: 回復 #3 Tim 的帖子
3 hole piston won't be too soft?

Let me try try. Thanks!

作者: GigaRacer 時間: 2007-4-2 14:02
標題: M03 + TA05 dampers help!!!
Finished building it la....

M03 + plastic oil dampers + rear toe-in + ball diff....

Somehow, the front shake a lot when it start up. Once it's running, then it's ok. Is it normal? Or is it because my ball diff too tight?

Also, there are quite a lot 虛位.....

Help!!!!

[ 本帖最後由 GigaRacer 於 2007-4-1 22:08 編輯 ]

作者: 阿海 時間: 2007-4-3 01:04
use 2 hole for the front.
don't use o-ring, use the alloy spacer set from tamiya or any brand, the o-ring will "going" together time after time~~~

作者: GigaRacer 時間: 2007-4-3 06:25
I will try to cut the spring shorter before spending $$ to buy the TRF short springs.

作者: GigaRacer 時間: 2007-4-4 01:16
Car lowered by cutting springs

作者: 馮馮ymc 時間: 2007-4-4 01:23

cut彈弓..................

作者: GigaRacer 時間: 2007-4-4 01:37
cheapest way

作者: kaho0338 時間: 2007-4-4 01:38

原帖由 GigaRacer 於 2007-4-4 01:16 發表
Car lowered by cutting springs

don't do that ..... just buy a spring...
i recommend use shot blue on front, and normal red springs on the back

作者: kaho0338 時間: 2007-4-4 01:39
spring is really cheap........... $15hkd one pair in hk

作者: GigaRacer 時間: 2007-4-4 01:41
標題: 回復 #11 kaho0338 的帖子
like these?
http://search.ebay.com/search/se ... le=trf+short+spring

so hard on front, and soft on back?

作者: kaho0338 時間: 2007-4-4 01:42

原帖由 GigaRacer 於 2007-4-4 01:41 發表
like these?
http://search.ebay.com/search/se ... le=trf+short+spring

so hard on front, and soft on back?

yes...or u can try yellow short on front, red long on back.

作者: GigaRacer 時間: 2007-4-4 01:46
標題: 回復 #14 kaho0338 的帖子
Man, unlike KWS, we have to mail order almost everything other than the car kit.

Will order the spring and shim..... but I will try out my shortened spring while waiting

btw, is there adjustable camber arm to buy?

作者: kaho0338 時間: 2007-4-4 01:50

原帖由 GigaRacer 於 2007-4-4 01:46 發表
Man, unlike KWS, we have to mail order almost everything other than the car kit.

Will order the spring and shim..... but I will try out my shortened spring while waiting

btw, is there a ...

here u are ....but it is not tamiya offical product
http://www.3racing.com.hk/x_descriptions_pop.jsp?x_products_key=8838

作者: GigaRacer 時間: 2007-4-6 02:25
Bros, my cut springs works surprisingly good on my M03

No "cup", willing to turn, chasing tourings

Now, I am looking for better tires for TCS. It will be summer time in outdoor parking lot. Radial or Slick tires?

作者: kaho0338 時間: 2007-4-6 10:39

原帖由 GigaRacer 於 2007-4-6 02:25 發表
Bros, my cut springs works surprisingly good on my M03 No "cup", willing to turn, chasing tourings

Now, I am looking for better tires for TCS. It will be summer time in outdoo ...

use RI on the front and RP on the rear....if you use both RP it will easy to cup4.

RI tire i can not find informations.
RP tire:
http://www.speedtechrc.com/store/ebproduct.asp?catmainid=357

作者: GigaRacer 時間: 2007-4-6 13:09
TCS can only use Tamiya parts and tires

作者: kaho0338 時間: 2007-4-6 15:45

原帖由 GigaRacer 於 2007-4-6 13:09 發表
TCS can only use Tamiya parts and tires

so use tamiya slick

作者: GigaRacer 時間: 2007-4-6 23:54
標題: 回復 #20 kaho0338 的帖子
There are

Slick
Super Slick
Re-inforced Slick A

thinking super slick or re-inforced in front, and then slick or super slick rear. Headache...

作者: kaho0338 時間: 2007-4-7 00:05
我建議前可以冇今咬 .....後咬地d

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)