RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Kyosho - Wild Dodge Ram " Instruction manual " [打印本頁]

作者: fyin 時間: 2007-4-18 19:35
標題: Kyosho - Wild Dodge Ram " Instruction manual "
各位師兄,
請問有冇人有哩架京商大腳油車既 " 說明書 " ?
有既話可唔可以scan後send 比我呀?

Thank you so much.

作者: ~出前一丁~ 時間: 2007-4-18 19:38
插住火咀電影相咁型.....

星期六你會唔會帶埋架934去試??

作者: abcde 時間: 2007-4-18 21:16
hard to find manul woo

but is this link help ??
http://www.dansdata.com/qrc.htm

...you may ask that guy for sent you manul

[ 本帖最後由 abcde 於 2007-4-18 21:48 編輯 ]

作者: fyin 時間: 2007-4-18 23:38

原帖由 ~出前一丁~ 於 2007-4-18 19:38 發表
插住火咀電影相咁型.....
星期六你會唔會帶埋架934去試??

火咀電已壞, 張相係上手車主影的.

作者: fyin 時間: 2007-4-18 23:46

原帖由 abcde 於 2007-4-18 21:16 發表
hard to find manul woo
but is this link help ??
http://www.dansdata.com/qrc.htm
...you may ask that guy for sent you manul

Hi Bro,
I just sent e-mail to Dan for help. Hope he will reply to me ASAP la.

作者: 大頭妹 時間: 2007-4-19 00:16

原帖由 fyin 於 2007-4-18 23:38 發表

火咀電已壞, 張相係上手車主影的.

就係比你賣左，我遲你一步！我唔制呀！

[ 本帖最後由大頭妹於 2007-4-20 01:01 編輯 ]

作者: fyin 時間: 2007-4-20 00:57
Hi 大頭妹,
剛剛又有一部向7:00可左右post, 不過8:00已經賣咗啦. 仲係$450.-
不過冇接收.我都想買黎當parts.

下次快手啲啦, 如果買到就一齊玩啦. 但你先要搵番個殼先.

作者: 大頭妹 時間: 2007-4-20 01:01

原帖由 fyin 於 2007-4-20 00:57 發表
Hi 大頭妹,
剛剛又有一部向7:00可左右post, 不過8:00已經賣咗啦. 仲係$450.-
不過冇接收.我都想買黎當parts.
下次快手啲啦, 如果買到就一齊玩啦. 但你先要搵番個殼先.

今日反左大陸！成十點先反！點知喎

作者: rc2006 時間: 2007-4-20 01:12
Hi , There is manual at Kyosho's site. Although not 100% identical to your model but the parts are more or less the same.

You can see it here:

http://www.kyosho.com/jpn/suppor ... 1_megaforcejr_m.pdf

作者: fyin 時間: 2007-4-20 23:36

原帖由 rc2006 於 2007-4-20 01:12 發表
Hi , There is manual at Kyosho's site. Although not 100% identical to your model but the parts are more or less the same.

You can see it here:

http://www.kyosho.com/jpn/support/instructi ...

Hi Bro,
Thank you so much! its manual almost same as my truck.
So I can print out for re-assemble la.

Thank your help again.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)