RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: mini inferno questions [打印本頁]

作者: agentjerry 時間: 2007-4-22 19:08
標題: mini inferno questions
hi.
big brother
i brought a koyosho SP motor $98 but there is not change in speed.
i want to change the esc and servo to increase its speed. i know i need to buy a receiver too.
do u have any recommend for esc servo and receiver. do i need to buy a new control? and how much are for these items?

also if i just buy the 9.6v battery (for mini inferno) is it ok?

tks

作者: DriftNoobie 時間: 2007-4-22 19:12
For Mini Inferno, if you change ANY electronic parts, you have to change ALL of them.

Transmitter, Receiver, ESC, Servo...

For 9.6v, you must check if the "new" ESC support 9.6v or not.
If using original electronics, you better add an additional Kyosho device. Or else, the Kyosho original electronic may FRY!

Good luck.

WHY DOUBLE POSTING?

作者: CDR123 時間: 2007-4-22 23:32
More info. for 9.6v local ECS about $160~ 190, and a hi-tech 81 metal gear servo about $170~ 190. add receiver so can be run faster.

作者: agentjerry 時間: 2007-4-23 18:46

原帖由 CDR123 於 2007-4-22 23:32 發表
More info. for 9.6v local ECS about $160~ 190, and a hi-tech 81 metal gear servo about $170~ 190. add receiver so can be run faster.

so if i can use the original remote control? and how about the battery? buy the 9.6V?

作者: CDR123 時間: 2007-4-24 00:00
you cannot use the original remote control if you change the ECS & servo.

作者: agentjerry 時間: 2007-4-24 20:53

原帖由 CDR123 於 2007-4-24 00:00 發表
you cannot use the original remote control if you change the ECS & servo.

any recommendation for remote control or package?

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)