RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: TB evo II同TB evo I有咩唔同 [打印本頁]

作者: leeho888 時間: 2007-4-23 14:28
標題: TB evo II同TB evo I有咩唔同
TB evo II同TB evo I有咩唔同

thx !

作者: leeho888 時間: 2007-4-24 19:07
有咩唔同

作者: RCman 時間: 2007-4-24 19:20
TB-evo1 都重係用膠件
evo2開始有金屬件，如波箱碼，
基本上，evo1/evo2係兩部完全不同的車
你可以去DL兩分menu see see就知

作者: WongTF 時間: 2007-4-24 19:42
我剛剛想開個topic問各代TB evo有咩唔同邊部好d添

[ 本帖最後由 WongTF 於 2007-4-24 19:43 編輯 ]

作者: WongTF 時間: 2007-4-24 19:43

原帖由 RCman 於 2007-4-24 19:20 發表
TB-evo1 都重係用膠件
evo2開始有金屬件，如波箱碼，
基本上，evo1/evo2係兩部完全不同的車
你可以去DL兩分menu see see就知

咁evo3呢？

作者: leeho888 時間: 2007-4-24 20:04

原帖由 RCman 於 2007-4-24 19:20 發表
TB-evo1 都重係用膠件
evo2開始有金屬件，如波箱碼，
基本上，evo1/evo2係兩部完全不同的車
你可以去DL兩分menu see see就知

thx !

作者: WongTF 時間: 2007-4-24 21:51

原帖由 RCman 於 2007-4-24 19:20 發表
TB-evo1 都重係用膠件
evo2開始有金屬件，如波箱碼，
基本上，evo1/evo2係兩部完全不同的車
你可以去DL兩分menu see see就知

但係就咁睇manual都唔知個分別wor

http://www.tamiya.com/english/rc/rcmanual/tbevo.pdf

http://www.tamiya.com/english/rc/rcmanual/tbevo2.pdf

http://www.tamiya.com/english/rc/rcmanual/tbevo3.pdf

http://www.tamiya.com/english/rc/rcmanual/tbevo3surikarn.pdf

http://www.tamiya.com/english/rc/rcmanual/tbevo4.pdf

http://www.tamiya.com/english/rc/rcmanual/tbevo4ms.pdf

http://www.tamiya.com/english/rc/rcmanual/58371tb_evo5.pdf

作者: RCman 時間: 2007-4-24 22:06

原帖由 WongTF 於 2007-4-24 21:51 發表

但係就咁睇manual都唔知個分別wor

http://www.tamiya.com/english/rc/rcmanual/tbevo.pdf

http://www.tamiya.com/english/rc/rcmanual/tbevo2.pdf

http://www.tamiya.com/english/rc/rcmanual/tb ...

分得好清楚啦

作者: shungyan 時間: 2007-4-24 23:01
I think you want to know the upgrade between each generation. Let me start some first please help complete/correct it together la!!

TB01 EVO. Base on the design of TB01. Replace the plastic tube with graphic chassis. Full bearing and metal shock absorber. Nothing special but it was a good car.

TB01 EVO II. Full bearing of course. Suspension part is upgraded. Different lower arm and upper arm. Metal suspension arm mounts are adopted. Bottom and top chassis sharp is also narrowed and changed. The largest change is the gear box. It composes of 2 metal bulk heads to hold the plastic gear box

TB01 EVO III. Totally different from EVO I and EVO II. A newly design car based on TB EVO 2.5. Nothing shares with the previous generations. Highly narrowed chassis which move the weight as close to the centre line as possible. Newly design suspension arm mount. The whole set of suspension part from 414 is adopted. Flourine coated shock absorber. Newly designed gear set and connected by the most direct and the lightest one piece propeller shaft.

TB01 EVO IV. Still has great change from TB EVO III. Has front and rear metal gear box. Newly design propeller shaft which divided in to 3 (TB EVO III using one piece propeller shaft). Adopts light weight reversable arm kit. Different internal gear ratio. Others: high-end standard.

TB01 EVO V. The latest generation. Ultra low CG design. Top open style metal gear box. CVD type propeller shaft. Others high-end standard

Thats all I know!

Which one is the best??

Highest grade
EVO V. It solves the biggest problem in this series, the front one way gear strip. Has the lowest CG which help providing better body movement. Easy maintence.

The most innovative
EVO III. It still is the one which has the lightest and simplest shaft drive structure.

作者: wong2109 時間: 2007-4-26 01:19
都唔明孖星做乜鬼一個型號出幾廿隻VERSION

作者: 烈火之魂 時間: 2007-4-26 01:51
TB EVO5 最好!!!

作者: 老夫子 時間: 2007-4-27 23:28
TB EVO5 e加仲有無得買嫁

作者: raymen 時間: 2007-5-5 22:59
標題: really?
Really still selling? Any brothers have this car? Good performance?

作者: leeho888 時間: 2007-5-8 14:10
TB-evo1用唔用得TB02 d parts?

作者: 烈火之魂 時間: 2007-5-9 02:47

原帖由 老夫子 於 2007-4-27 23:28 發表
TB EVO5 e加仲有無得買嫁

當然有啦~早一個月我先買!!

作者: bcgg 時間: 2007-5-9 12:39
I am still playing this car

This is a good car

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

作者: leeho888 時間: 2007-5-9 20:09

原帖由 bcgg 於 2007-5-9 12:39 發表
I am still playing this car
This is a good car

TB-evo1用唔用得TB02 d parts?

作者: bcgg 時間: 2007-5-10 09:55
標題: 回復 #18 leeho888 的帖子
I dont think so.... the arm, gearbox.... are totally different...but TBevo can share some parts with TG10R....

作者: leeho888 時間: 2007-5-10 10:30
thx, no parts

作者: sIUcHuN 時間: 2007-5-10 14:37

原帖由 leeho888 於 2007-5-9 20:09 發表

TB-evo1用唔用得TB02 d parts?

少量可以用到.
可以改TB-02既轉向杯,尾C座,膠既大減座.
不過咁改,要換TB-02既狗骨同狗骨杯.
以前部TB EVO2已經咁做.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)