RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: wild willy 2 RTR? [打印本頁]

作者: agentjerry 時間: 2007-4-28 18:40
標題: wild willy 2 RTR?
Is any different between RTR set and one with ESC set especially in the speed for wild willy 2?

tks!!!

作者: lespaul 時間: 2007-4-28 20:10
No difference, I think the rtr set may not include bearings..

作者: agentjerry 時間: 2007-4-28 21:12

原帖由 lespaul 於 2007-4-28 20:10 發表
No difference, I think the rtr set may not include bearings..

so if i could input the bearing and use 23T motor and powerful battery to increase its speed?

作者: smallfaifai 時間: 2007-4-29 18:50

原帖由 agentjerry 於 2007-4-28 21:12 發表

so if i could input the bearing and use 23T motor and powerful battery to increase its speed?

WW2用23T會唔會快得滯？

我個人覺得黑豬都好夠用……除左換晒全車baering，我覺得可換埋搖臂串邊(其實即係TL01用o個套option品)同埋避震，行車表現會好好多！

WW2車主(仲用緊白豬)

作者: agentjerry 時間: 2007-4-30 19:06

原帖由 smallfaifai 於 2007-4-29 18:50 發表

WW2用23T會唔會快得滯？

我個人覺得黑豬都好夠用……除左換晒全車baering，我覺得可換埋搖臂串邊(其實即係TL01用o個套option品)同埋避震，行車表現會好好多！

WW2車主(仲用緊白豬)

sorry!

i don't understand what is 搖臂串邊. pls advice
and what battery u used for WW2

tks....

作者: RcFun 時間: 2007-4-30 19:19

原帖由 agentjerry 於 2007-4-30 19:06 發表

sorry!

i don't understand what is 搖臂串邊. pls advice
and what battery u used for WW2

tks....

In fact, you don't need to change 搖臂串邊, it is still OK to play. For those option parts, you can up grade later.
For battery : Normal 7.2V 直Pack 电, 由1200mAh 至 4600 mAh 不等都可用.

作者: agentjerry 時間: 2007-4-30 19:54

原帖由 RcFun 於 2007-4-30 19:19 發表

In fact, you don't need to change 搖臂串邊, it is still OK to play. For those option parts, you can up grade later.
For battery : Normal 7.2V 直Pack 电, 由1200mAh 至 4600 mAh 不等都可用.

big brother!

tks so much for yr advice.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)