RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: New buggy ~ Aero A-one ( Durango ) [打印本頁]

作者: barrypops 時間: 2007-4-30 03:49
標題: New buggy ~ Aero A-one ( Durango )
It 's Durango....but named A-one by Aero

作者: rk2 時間: 2007-4-30 09:06
車頭連 bumper 都無

車頭,尾波箱都用萬向連接的. 又唔加二樓板補強.........

作者: tungkee 時間: 2007-5-1 00:19
睇落好似唔jump得，唔撞得，只可以行得同走得 !!

作者: fyin 時間: 2007-5-1 01:59
大家唔知有冇留意嗰底板係6~7mm 厚CNC鋁板一件過出+偷輕
仲使密要二樓板呀. 撞都唔爛啦.

作者: billgate803 時間: 2007-5-1 02:10
呢架野幾型

作者: barrypops 時間: 2007-5-1 03:39

原帖由 fyin 於 2007-5-1 01:59 發表
大家唔知有冇留意底板係6~7mm 厚CNC鋁板一件過出+偷輕
仲使密要二樓板呀. 撞都唔爛啦.

But the company said....the chassis will be made by hard plastic with graphite ......

作者: barrypops 時間: 2007-5-1 03:44

原帖由 billgate803 於 2007-5-1 02:10 發表
呢架野幾型

And this buggy won the race in UK recently !
defeat slim4 , X-5, bj4....X11

作者: mikewu 時間: 2007-5-1 22:10
Very attractive.......... looks even stronger than the 501..... When the indoor buggy track upens... This will be MINE!!

作者: billgate803 時間: 2007-5-1 22:36

原帖由 barrypops 於 2007-5-1 03:44 發表

And this buggy won the race in UK recently !
defeat slim4 , X-5, bj4....X11

果然係勁野~
made by hard plastic with graphite .

還記得你不喜歡膠底板.

不必太失望既, hard plastic with graphite 不竟是特殊物料.

作者: fyin 時間: 2007-5-2 01:16
But the photo shown is the Alum. chassis, may be its option or modify parts.

作者: minimini 時間: 2007-5-2 01:17

原帖由 fyin 於 2007-5-2 01:16 發表
But the photo shown is the Alum. chassis, may be its option or modify parts.

or just the prototype only........

作者: billgate803 時間: 2007-5-18 22:53
呢部 a1 咁勁, 相信因為佢底板夠窄.

其實 tamiya df03 改左個servo 係頭, 再cut左底板兩邊, 電子野放係電上面, 會仲窄過呢部 a1 durango.

另外仲有保留其直電優點.

[ 本帖最後由 billgate803 於 2007-5-18 22:59 編輯 ]

作者: barrypops 時間: 2007-5-20 00:20

原帖由 billgate803 於 2007-5-1 22:36 發表

果然係勁野~
made by hard plastic with graphite .

還記得你不喜歡膠底板.

不必太失望既, hard plastic with graphite 不竟是特殊物料.

夷!好衰.....甘記得人地講過口既野

作者: sgg 時間: 2007-5-20 00:40
HARA use this in 06 pe-world

作者: barrypops 時間: 2007-5-20 00:50

原帖由 sgg 於 2007-5-20 00:40 發表
HARA use this in 06 pe-world

really ???

作者: ALEXANDER 時間: 2007-5-20 01:03

原帖由 billgate803 於 18/5/2007 10:53 PM 發表
呢部 a1 咁勁, 相信因為佢底板夠窄.

其實 tamiya df03 改左個servo 係頭, 再cut左底板兩邊, 電子野放係電上面, 會仲窄過呢部 a1 durango.

另外仲有保留其直電優點.

點解你認為佢a1係因為個底板夠窄呢!?
同埋你又認為直電有咩優點呢!?

[ 本帖最後由 ALEXANDER 於 2007-5-20 01:13 編輯 ]

作者: eason 時間: 2007-5-20 01:23
我諗呢部車可以低一眾勁車......個 design 肯定可取.....不過亦唔可以唔記得車手隻手指, motor & electronics 同樣重要....

我覺得窄底板喺 d 連續嘅 S 彎係著數 d 嘅.....另外 stick pad 換電點都快過分体電啦.....

作者: ALEXANDER 時間: 2007-5-20 01:27

原帖由 eason 於 20/5/2007 01:23 AM 發表
我諗呢部車可以低一眾勁車......個 design 肯定可取.....不過亦唔可以唔記得車手隻手指, motor & electronics 同樣重要....

我覺得窄底板喺 d 連續嘅 S 彎係著數 d 嘅.....另外 s ...

唔係跑五分鐘!?途中要換電???

作者: joho 時間: 2007-5-21 14:58
Yes, Hara use this to won the pre-world. But I think right now Durango are in some legal action against Aero right now, for direct copy/ stealing his design..

作者: barrypops 時間: 2007-5-21 22:59

原帖由 joho 於 2007-5-21 14:58 發表
Yes, Hara use this to won the pre-world. But I think right now Durango are in some legal action against Aero right now, for direct copy/ stealing his design..

But the web said ....the Company Aero...bought the design....let me check it again !

作者: joho 時間: 2007-5-22 17:06
Let me guess, you read the news from Aero website or Oople? If oople, then you should be able to read the announcement both Durango and Aero made regarding this issue. I really love this buggy too, I am hoping they can really push it out..

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)