RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: TA05R completed ! [打印本頁]

作者: ernestf 時間: 2007-5-11 09:40
標題: TA05R completed !
Finally completed my TA05R, only change to f/r graphite shock tower and I am lazy to build the shocks so move from my Tech MY02M. I will run 5cell with the V2 8x1 motor. The ESC is the Keyence eXstraight with a super cap and 25A diode mounted. I will add a motor clip cooling fan too ...

[ 本帖最後由 ernestf 於 2007-5-11 10:44 編輯 ]

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

作者: rk2 時間: 2007-5-11 09:56
cannot see any difference between 5 cells and 6 cells except you put a 5 cell battery or 6 cell battery in it.

作者: ernestf 時間: 2007-5-11 10:16
I think the major difference between 5cell and 6cell would be the balance of the chassis - ie, how much weight to put in on left/right side ... I am still quite new to the 5cell game so still a lot to learn and to experience.

作者: jacky-lee 時間: 2007-5-11 10:29
同我部六cell一樣

作者: ernestf 時間: 2007-5-11 10:49
Sorry if the topic is misleading, I just want to share my newly completed TA05R and I will run 5cell - I am not saying that it is a special 5cell version ... ...

I would welcome suggestion of how to make it run 5cell in better balance/setup.
I have changed my topic ...

作者: 007 時間: 2007-5-11 12:02
Can you put your 5 cells battery in your chasis? I would like to see how you connect the battery + -.

作者: redtigerhk 時間: 2007-5-11 19:27
你釱推捍放係車頭上面果對比較有用

作者: lichungkiu 時間: 2007-5-11 21:40
應該有個野上住條電源線，如果唔係會磨皮帶

作者: ernestf 時間: 2007-5-12 23:49

原帖由 007 於 2007-5-11 12:02 發表
Can you put your 5 cells battery in your chasis? I would like to see how you connect the battery + -.

007, here is how I put 5cell pack onto the TA05R chassis.
Hope this helps.

lichungkiu - thanks for your advice - the wires will not touch the belt in this way ...

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

作者: penny..t.o.p. 時間: 2007-5-13 12:20
標題: 回復 #9 ernestf 的帖子
sorry...........I want to know the TA-05R is have one way or 4 wheel............THX!!!

作者: ernestf 時間: 2007-5-13 14:35
TA05R comes with front and rear ball diff ...

作者: 007 時間: 2007-5-13 22:25
Thanks. Understand how you place your banana plugs now.

作者: penny..t.o.p. 時間: 2007-5-14 00:55

原帖由 ernestf 於 2007-5-13 14:35 發表
TA05R comes with front and rear ball diff ...

THX!!!..........

作者: wakaka 時間: 2007-5-14 21:46
so nice!!

作者: cyrus1985hk 時間: 2007-5-14 22:07
同我個ga 一樣......

作者: ernestf 時間: 2007-5-14 22:45
thanks all for the comments !

the TA05R is quite heavy, with 5cell, PF M6 body shell and a set of 40R/Hara 1.0 insert, it weight at 1499g ! I am using a V2 7x1 motor, and still finding the most efficient gear ratio (testing at 1:8.6), runtime is about 6min with IB4200 cells.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)