RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: My new 2WD XXX-CR [打印本頁]

作者: barrypops 時間: 2007-5-19 01:19
標題: My new 2WD XXX-CR
I also have one BK2.....

This XXX-CR is having a little bit of details different from BK2.....a little improvement !

[ 本帖最後由 barrypops 於 2007-5-19 01:20 編輯 ]

作者: RX78amuroray 時間: 2007-5-19 01:21
where to buy? Fast 折?

作者: barrypops 時間: 2007-5-19 01:28
I bought it from Ebay few weeks ago....ah !!!!!!!!!!!!

Cause Fast 折 hasn't any in two weeks ago

作者: loken 時間: 2007-5-19 08:40
How much it cost?

作者: buggy 時間: 2007-5-19 09:57
is it graphite composite chassis as the BK2?

作者: barrypops 時間: 2007-5-19 12:40

原帖由 buggy 於 2007-5-19 09:57 發表
is it graphite composite chassis as the BK2?

It said it was made by EA3 material.....which is harder...than BK2

作者: barrypops 時間: 2007-5-19 12:42

原帖由 loken 於 2007-5-19 08:40 發表
How much it cost?

USD 220 = HKD 1700
But the shipping is USD 40 by UPS

BUT it came along with 5 spare parts......

作者: jas 時間: 2007-5-20 11:54
Makes me miss my XX-CR from long time ago... may be 9 to 10 years ago.

作者: hkBuggyboy 時間: 2007-5-20 19:03
I also have xx-cr too. & ready to play in TRC for fun

作者: hkBuggyboy 時間: 2007-5-20 21:23

原帖由 jas 於 2007-5-20 11:54 發表
Makes me miss my XX-CR from long time ago... may be 9 to 10 years ago.

You stiill own this car?

作者: rcplayer 時間: 2007-5-20 22:08

原帖由 hkBuggyboy 於 2007-5-20 19:03 發表
I also have xx-cr too. & ready to play in TRC for fun

how much of the xxx-cr ?

作者: barrypops 時間: 2007-5-20 23:02

原帖由 rcplayer 於 2007-5-20 22:08 發表

how much of the xxx-cr ?

$1800

作者: joho 時間: 2007-5-21 14:55
Barry, the EA3 are actually softer then the graphite arm on BK2, with EA3, the car were easy to drive due to more flex. But if you want to bullet proof it, then you should change the front arm into Graphite version.
XXX-CR is very easy to drive, a very nice full competition buggy indeed, now all you need is some brushless motor..

原帖由 barrypops 於 2007-5-19 12:40 發表

It said it was made by EA3 material.....which is harder...than BK2

作者: barrypops 時間: 2007-5-21 22:57

原帖由 joho 於 2007-5-21 14:55 發表
Barry, the EA3 are actually softer then the graphite arm on BK2, with EA3, the car were easy to drive due to more flex. But if you want to bullet proof it, then you should change the front arm into ...

Hi ! Joho.....
Thanks for your advise !

But ...which brushless is the best for buggy ?

Are you in Hong Kong ?
Let 's play together ...with ....vintage buggies

作者: joho 時間: 2007-5-22 17:00
Damn, Barry! You really know me! hahaha I will love to play some vintage, I am in HK right now, but my collection is not.. Let's wait till the Hotshot is out, at least I can buy a few of them in here!
For 2WD, highly recommend 7.5 turn (Hard to found in HK thou), not everyone is good enough to drive a 6.5, too much for us..
For speedo, I will recommend LRP, for motor, I love Novak more. Forget the new orion, they have holes in their can, not recommend for off-road..
By the way Barry, slightly off topic here, but lately I am having a hard time to include a AYK model in my collection, I really want the Radiant, can you point me to the right direction? You can answer me through PM..

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)