RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: PAJERO EVO6 VER. [打印本頁]

作者: bcgg 時間: 2007-5-31 12:44
標題: PAJERO EVO6 VER.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

[ 本帖最後由 bcgg 於 2007-10-4 14:13 編輯 ]

作者: 小dede 時間: 2007-5-31 12:49
車尾差個LOOK 就型哂

我想問下le d係咩車黎?

作者: leeho888 時間: 2007-5-31 12:59
good

作者: 傻玉 時間: 2007-5-31 13:04
又放毒

ta02嗎

作者: monkichi0210 時間: 2007-5-31 13:19
minus u 20 points ar!!!!!!!!! u didn't put on the spare tyre!!!!hahaha...............
so nice la brother..........looking forward for your EVO.5 version la.........
one more qustion.........where did u get your EVO 5 and EVO 6 decal ar??????

作者: gibson 時間: 2007-5-31 13:20
Very nice, mud shell nei ga!!!!

作者: bcgg 時間: 2007-5-31 14:02

原帖由 小dede 於 2007-5-31 12:49 發表
車尾差個LOOK 就型哂

我想問下le d係咩車黎?

士啤呔仲噴梗

至於係乜車....
http://bbs.rc-evo.com/viewthread.php?tid=44531

作者: bcgg 時間: 2007-5-31 14:04

原帖由傻玉於 2007-5-31 13:04 發表
又放毒
ta02嗎

Yes, is TA02 chassis...

作者: bcgg 時間: 2007-5-31 14:10

原帖由 monkichi0210 於 2007-5-31 13:19 發表
minus u 20 points ar!!!!!!!!! u didn't put on the spare tyre!!!!hahaha...............
so nice la brother..........looking forward for your EVO.5 version la.........
one more qustion.........where ...

Thanks
你近排有乜新作呢?
而D Label, EVo6就係我有個EVO6 噴左第二D花而剩低, EVO5 就係喺 HingKee買的.你得閒去睇睇,可能會揾到D正Label

作者: bcgg 時間: 2007-5-31 14:11

原帖由 gibson 於 2007-5-31 13:20 發表
Very nice, mud shell nei ga!!!!

大陸玩具...
真係正嗎??

http://bbs.rc-evo.com/viewthread.php?tid=44531

作者: bcgg 時間: 2007-5-31 14:17

原帖由 monkichi0210 於 2007-5-31 13:19 發表
minus u 20 points ar!!!!!!!!! u didn't put on the spare tyre!!!!hahaha...............
so nice la brother..........looking forward for your EVO.5 version la.........
one more qustion.........where ...

其實除左Pajero多,仲有幾個Plan排梗隊,
透露其中一個比你覺得OK唔OK?

Tamiya MX5 shell x TA03Rs Chassis x Disney Cars McQueen Decal, What do you think?

作者: yman 時間: 2007-5-31 14:23
標題: 回復 #1 bcgg 的帖子
Mitsubishi Montero 4x4

: 登錄/註冊後可看大圖

作者: monkichi0210 時間: 2007-5-31 14:28

原帖由 bcgg 於 2007-5-31 14:10 發表

Thanks
你近排有乜新作呢?
而D Label, EVo6就係我有個EVO6 噴左第二D花而剩低, EVO5 就係? HingKee買的.你得閒去睇睇,可能會搵到D正Label

making the northcraft EVO4 same as your signature right now.........will post later la.........

作者: bcgg 時間: 2007-5-31 14:30

原帖由 yman 於 2007-5-31 14:23 發表
Mitsubishi Montero 4x4

This one exactly the "

ajero Evolution", I also have two 1:10 scale hard shell at home, may be..... install it to some big foot chassis

作者: bcgg 時間: 2007-5-31 14:33

原帖由 monkichi0210 於 2007-5-31 14:28 發表

making the northcraft EVO4 same as your signature right now.........will post later la.........

This is cool, and I believe you will bring the shell take photo outside somewhere, not like me just take a shot at home

作者: monkichi0210 時間: 2007-5-31 14:33

原帖由 bcgg 於 2007-5-31 14:17 發表

其實除左Pajero多,仲有幾個Plan排梗隊,
透露其中一個比你覺得OK唔OK?

Tamiya MX5 shell x TA03Rs Chassis x Disney Cars McQueen Decal, What do you think?

will the MX-5 too small for TA03RS ma?????

作者: gibson 時間: 2007-5-31 14:33
Good stuffs!!!

作者: bcgg 時間: 2007-5-31 15:04

原帖由 monkichi0210 於 2007-5-31 14:33 發表

will the MX-5 too small for TA03RS ma?????

It is fit, I think TA03RS= M04L, but a little bit wide, but I use some wheel with 0 offset, it fit.
I take photo for you and show tomorrow...

作者: bcgg 時間: 2007-5-31 15:05

原帖由 monkichi0210 於 2007-5-31 14:33 發表

will the MX-5 too small for TA03RS ma?????

Also, Posche Boxter and SLK is ok too.

作者: mikewu 時間: 2007-5-31 15:06
Come to TKO this weekend and play la!! many TA02 Hummers and/or CC01 Pajeros will be there ga!!

作者: bcgg 時間: 2007-5-31 15:12

原帖由 mikewu 於 2007-5-31 15:06 發表
Come to TKO this weekend and play la!! many TA02 Hummers and/or CC01 Pajeros will be there ga!!

I know you guy have a party this weekend, and I am very very interest to come play RC and make friend with you guy,
but..... I already plan to go to Ocean Park with my family that day

Believe me , I try to come next party, play RC with you RC guys

作者: 007 時間: 2007-5-31 15:29
bcgg, I give my whole day Sat to my family in order to earn the play time on Sunday. Don't get married.

作者: bcgg 時間: 2007-5-31 16:49

原帖由 007 於 2007-5-31 15:29 發表
bcgg, I give my whole day Sat to my family in order to earn the play time on Sunday. Don't get married.

Dont Worry, 我成日好鼓勵我女友同佢D女仔朋友去睇衫,同我玩RC一樣,唔厭架

作者: tsun3428 時間: 2007-5-31 22:23
嘩....
咁靚既

作者: txzmxn 時間: 2007-5-31 23:11

原帖由 bcgg 於 2007-5-31 12:44 PM 發表
PAJERO EVO6 VER.
終於完成,又係攞嚟陳列多了...

大家覺得如何呢???比D意見啦!!!

效果幾好, 正!
想問點整走原裝啲 sticker o架?

作者: sIUcHuN 時間: 2007-5-31 23:50
標題: 回復 #12 yman 的帖子
早前見到有Pajero Evolution殼賣(KYOSHO),不過要$350,唔捨得買.

作者: minimini 時間: 2007-5-31 23:53

原帖由 sIUcHuN 於 2007-5-31 23:50 發表
早前見到有Pajero Evolution殼賣(KYOSHO),不過要$350,唔捨得買.

不過唔知用唔用到喺 CC01 喎.......

作者: bcgg 時間: 2007-6-1 09:42

原帖由 txzmxn 於 2007-5-31 23:11 發表

效果幾好, 正!
想問點整走原裝啲 sticker o架?

試下用風筒吹就ok了....

作者: bcgg 時間: 2007-6-1 09:43

原帖由 tsun3428 於 2007-5-31 22:23 發表
嘩....
咁靚既

多謝...

作者: bcgg 時間: 2007-6-1 10:47

原帖由 sIUcHuN 於 2007-5-31 23:50 發表
早前見到有Pajero Evolution殼賣(KYOSHO),不過要$350,唔捨得買.

$350,ok喎....Mini-Z嗰D都舊幾啦....何況1:10咁大個硬殼,抵喎.....

作者: music8888 時間: 2007-6-5 23:18
標題: 正ar!!
正ar!!

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)