RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Steering problems [打印本頁]

作者: raymen 時間: 2007-7-2 19:09
標題: Steering problems
Any brothers have the experience when the Front wheels are turning left or right, the Front Axle is making noise and Shaking up and down. Is that the problems from the drive shaft & Axle ??

[ 本帖最後由 raymen 於 2007-7-3 23:23 編輯 ]

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

作者: TOMY(HONG) 時間: 2007-7-2 19:50
轉用萬向會好好多架

(星黑色果隻喎)

作者: raymen 時間: 2007-7-2 20:53
標題: oh

原帖由 TOMY(HONG) 於 2007-7-2 07:50 PM 發表

 登錄/註冊後可看大圖

轉用萬向會好好多架 (星黑色果隻喎)

OH.. really, do U have this experience before? HOw come the size is not match ?

Why the 萬向 need the 黑色果隻 only? Whats the different between the siliver one?

THks......C.hing

[ 本帖最後由 raymen 於 2007-7-2 21:08 編輯 ]

作者: GigaRacer 時間: 2007-7-3 00:06
標題: 回復 #3 raymen 的帖子
That's a M03? Yeah, 萬向 is a must, so as the ball diff. I use 黑色果隻 (assembly universal) as well. Siliver one seems to be old design...

作者: raymen 時間: 2007-7-3 01:57
標題: ic

原帖由 GigaRacer 於 2007-7-3 12:06 AM 發表

 登錄/註冊後可看大圖

That's a M03? Yeah, 萬向 is a must, so as the ball diff. I use 黑色果隻 (assembly universal) as well. Siliver one seems to be old design...

That is M03R, how much is the Black assembly universial ?
thks...brother..

Which wheel base is the best performance? 210mm,225mm or 239mm?

作者: GigaRacer 時間: 2007-7-3 02:33
標題: 回復 #5 raymen 的帖子
I don't know how much in HK.

I use 210mm. I think you can use either 210mm or 225mm. Best performance depends on the track. If more turns, shorter is better.

One small tip: if the car flip over on the side, not 4wheel toward sky cup4, you can turn the wheels and give some gas, and it will flip back up by itself. Try Try.

作者: raymen 時間: 2007-7-3 20:57
標題: ,

原帖由 GigaRacer 於 2007-7-3 02:33 AM 發表

 登錄/註冊後可看大圖

I don't know how much in HK.

I use 210mm. I think you can use either 210mm or 225mm. Best performance depends on the track. If more turns, shorter is better.

One small tip: if the car ...

I check already today in KWS , no Tamiya universial sharft stock(Black), only 3 racing .
I like to use 210mm also

Tks for your help brother...

作者: raymen 時間: 2007-7-3 21:27
標題: ohhoh

原帖由 raymen 於 2007-7-2 07:09 PM 發表

 登錄/註冊後可看大圖

Any brothers have the experience when the Front wheels are turning left or right, the Front Axle is making noise and Shaking up and down. Is that the problems from the drive shaft & Axle ??

I ask the shop which I brought from there , he said its Normal???

BUt no Tamiya Universial shaft stock, only 3-racing that one

作者: GigaRacer 時間: 2007-7-3 22:26
標題: 回復 #8 raymen 的帖子
I think it's ok to buy 3racing if you are not racing in TCS (require Tamiya parts only)

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)