RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: novak brushless 3.5 turn pls help. [打印本頁]

作者: beaim 時間: 2007-7-11 23:40
標題: novak brushless 3.5 turn pls help.
normally novak brushless 3.5 turn use ratio around 11 to 13.

let say if i decrease EPA TH to 50% , will it possible to use ratio 6 ??

thinking of buying novak 3.5 or 8.5ex. any suggest?

thanks.

[ 本帖最後由 beaim 於 2007-7-12 01:11 編輯 ]

作者: 清清 時間: 2007-7-11 23:46
煩請問關"Keroro"咩事

作者: gibson 時間: 2007-7-11 23:50
I may say it won't work!!
and please delete your attachment, wasting source!!

作者: gibson 時間: 2007-7-11 23:51

原帖由清清於 2007-7-11 23:46 發表

 登錄/註冊後可看大圖

煩請問關"Keroro"咩事

Same feeling of "wasting sources"

作者: beaim 時間: 2007-7-12 00:05

原帖由 gibson 於 2007-7-11 23:51 發表

 登錄/註冊後可看大圖

Same feeling of "wasting sources"

sorry ...i duno how to delete.

acc i wanna put novak 3.5 pic. wrong le. sorry..

please answer my question pls pls...thanks.

作者: gibson 時間: 2007-7-12 00:17
Brushless motor needs a lot of power to push, it won't work with weak batteries.
You should pick the right brushless combo. Simple thing should make it simple, don't do it too complicated, wasting time.

Just like if you want to play 23T, buy the equivalent to 23t brushless = 8.5r combo!!!...............

作者: beaim 時間: 2007-7-12 00:30

原帖由 gibson 於 2007-7-12 00:17 發表

 登錄/註冊後可看大圖

Brushless motor needs a lot of power to push, it won't work with weak batteries.
You should pick the right brushless combo. Simple thing should make it simple, don't do it too complicated, wa ...

so u mean it wont works if decease 50% power and use ratio 6 on 3.5 turn ??

i just wanna know it works or not? any brother try b4?

作者: tungkee 時間: 2007-7-12 00:44

原帖由 beaim 於 2007-7-12 00:30 發表

 登錄/註冊後可看大圖

so u mean it wont works if decease 50% power and use ratio 6 on 3.5 turn ??

i just wanna know it works or not? any brother try b4?

你意思係用3.6v 推 gtb +3.5r !! 係既話我想你要用手推先得喇 !!(說明書有寫工作電壓，睇左就唔駛問!)

作者: beaim 時間: 2007-7-12 01:06

原帖由 tungkee 於 2007-7-12 00:44 發表

 登錄/註冊後可看大圖

你意思係用3.6v 推 gtb +3.5r !! 係既話我想你要用手推先得喇 !!(說明書有寫工作電壓，睇左就唔駛問!)

oh...brother.

i miss type and u all misunderstanding .

wat i mean is EPA TH 50%

作者: james891031 時間: 2007-7-30 01:01
我都想知OK唔OK
因為想玩慢D,用3.5R同23T一齊玩
但係唔知可唔可以降低EPA同時降低GEAR RATIO

作者: hqyen 時間: 2007-7-30 01:33
3.5R是高转速低扭力的，降低了齿比=要增加扭力，减低EPA=降低扭力，可能要用手推吧，没力啊。

作者: GigaRacer 時間: 2007-7-30 05:21
You can set EPA, but Gear Ratio should stay unchange.

This is what I don't understand.... People, Don't get the 3.5R because it's the same price as the 4.5R, 5.5R....10.5R... You should know what you use the motor for. Besides, pure speed doesn't mean anything without good setting and driving skill. As I mentioned before, the most popular brushless here in the USA is 10.5 and 13.5. 10.5R race with 19T, and 13.5R race with 27T.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)