RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: TT01 servo and ESC [打印本頁]

作者: agentjerry 時間: 2007-8-9 19:04
標題: TT01 servo and ESC
玩tt01 any servo and esc recommend?

and how much?

tks

作者: ice1234 時間: 2007-8-9 19:06
e個問題好在乎你有幾多錢

作者: agentjerry 時間: 2007-8-9 19:11

原帖由 ice1234 於 2007-8-9 19:06 發表

 登錄/註冊後可看大圖

e個問題好在乎你有幾多錢

i am not sure what size of servo is suitable for TT01?
any brand and model recommend

作者: ice1234 時間: 2007-8-9 19:13

原帖由 agentjerry 於 2007-8-9 07:11 PM 發表

 登錄/註冊後可看大圖

i am not sure what size of servo is suitable for TT01?
any brand and model recommend

最貴~=最好

作者: agentjerry 時間: 2007-8-9 19:17

原帖由 ice1234 於 2007-8-9 19:13 發表

 登錄/註冊後可看大圖

最貴~=最好

yes i can pay but what abt the size of servo?
which brand or model is most suitable for tt01?

作者: ice1234 時間: 2007-8-9 19:18

原帖由 agentjerry 於 2007-8-9 07:17 PM 發表

 登錄/註冊後可看大圖

yes i can pay but what abt the size of servo?
which brand or model is most suitable for tt01?

standard servo is suitable for tt01

作者: AlexFiona 時間: 2007-8-9 19:21
Servo用 futuba S9550

~ HK$550.-(AOUND)
ESC用VFS-1 C2

~ HK$1,200.-(AOUND)
如果ESC要有後波就用LRP Quantum PRO2 Reverse啦

~ HK$1,000.-(AOUND)

作者: MatthewChoi 時間: 2007-8-9 19:24
ESC用GTB 3.5R... HK$1,800.

作者: agentjerry 時間: 2007-8-9 19:24

原帖由 AlexFiona 於 2007-8-9 19:21 發表

 登錄/註冊後可看大圖

Servo用 futuba S9550  ~ HK$550.-(AOUND)
ESC用VFS-1 C2  ~ HK$1,200.-(AOUND)
如果ESC要有後波就用LRP Quantum PRO2 Reverse啦  ~ HK$1,000.-(AOUND)

ok
i go to buy S9550 la

tks

作者: ice1234 時間: 2007-8-9 19:31

原帖由 MatthewChoi 於 2007-8-9 07:24 PM 發表

 登錄/註冊後可看大圖

ESC用GTB 3.5R... HK$1,800.

GOOD

作者: AlexFiona 時間: 2007-8-9 19:33

原帖由 MatthewChoi 於 2007-8-9 19:24 發表

 登錄/註冊後可看大圖

ESC用GTB 3.5R... HK$1,800.

噤不如用LRP果套無刷啦, 重貴D呀

作者: chrishkyung 時間: 2007-8-9 19:39
9550 is worth to pay

作者: agentjerry 時間: 2007-8-9 20:10
money is not my conern but quality!!!

作者: chrishkyung 時間: 2007-8-9 20:15
then u go to buy ko low profile servo...which is even better than 9550

作者: info2victor 時間: 2007-8-10 00:00
買得咁正ge servo 就唔好用tt01 跟果個轉向啦... 起碼都買套hop-up 鋁hindge 啦易較得o黎又實淨ma~

作者: agentjerry 時間: 2007-8-10 00:18

原帖由 info2victor 於 2007-8-10 00:00 發表

 登錄/註冊後可看大圖

買得咁正ge servo 就唔好用tt01 跟果個轉向啦... 起碼都買套hop-up 鋁hindge 啦易較得o黎又實淨ma~

tks for yr advice

budget of $60xx is prepared.

作者: smallfaifai 時間: 2007-8-10 00:22
如果有咁多$$，可以唔玩TT01啦.......TRF415MSXX或TA05MS都係好選擇.........玩埋brushless(約2000)、S9550($5xx)、買套靚控都仲得,.......

作者: info2victor 時間: 2007-8-10 01:26

原帖由 agentjerry 於 2007-8-10 00:18 發表

 登錄/註冊後可看大圖

tks for yr advice

budget of $60xx is prepared.

welcome =)

but frankly if you have $60xx you can have a better everything... I mean even the top shaft grade TB EVO 5 is just 23xx, together with everything you need for a running car it might just be still around $60xx...

Let's say you get a $13xx controller with servo, a $13xx ESC, and a $2xx motor, it will still below $6k...

And it saves you lot's of trouble to find those hop-up parts...

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)