RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 點先可以買到呢D車殼 ? [打印本頁]

作者: courel500 時間: 2007-8-15 11:40
標題: 點先可以買到呢D車殼 ?
3 隻都好鬼鍾意

, 全部都係 1:10 size !

如果團購會唔會易好多呢 ? 版主mike~點睇呀 ?

相片 copy 自 Protoform 網頁內

作者: SunLi 時間: 2007-8-15 13:42
the upper two fit Monster trucks(T/E/2.5-MAXX®,REVO® & Savage) 1/8
http://www.prolineracing.com/pro ... ;category=mt_bodies

the lower one fits Traxxas® Stampede® 1/10
http://www.prolineracing.com/pro ... tegory=truck_bodies

Overseas order from U.S. Towerhobbies

http://www.towerhobbies.com
#3231
#3244
#3151

[ 本帖最後由 SunLi 於 2007-8-15 13:44 編輯 ]

作者: gary 時間: 2007-8-15 22:55

原帖由 courel500 於 2007-8-15 11:40 發表

 登錄/註冊後可看大圖

3 隻都好鬼鍾意 , 全部都係 1:10 size !

如果團購會唔會易好多呢 ? 版主mike~點睇呀 ?

相片 copy 自 Protoform 網頁內

去環球訂羅~~

作者: mikewu 時間: 2007-8-16 00:55
Ｉ　ｈａｖｅ　ｔｈｅ　２ｎｄ　ａｎｄ　ｔｈｅ　３ｒｄ　ｏｎｅ．．．．　Ｉ　ｃａｎ　ｓｅｌｌ　ｙｏｕ　ｔｈｅ　３ｒｄ　ｏｎｅ　ａｎｄ　Ｉ　ｗａｎｔ　ｔｏ　ｋｅｅｐ　ｔｈｅ　２ｎｄ　ｏｎｅ．．．　ｓｏｒｒｙ．．．．　　
Ｂｕｔ　Ｉ　ｇｏｔ　ｔｈｅｍ　ａｌｌ　ｆｒｏｍ　Ｊｅｔ　Ｈｏｂｂｙ．．．．　　

作者: anes 時間: 2007-8-16 06:26

原帖由 mikewu 於 2007-8-16 00:55 發表

 登錄/註冊後可看大圖

Ｉ　ｈａｖｅ　ｔｈｅ　２ｎｄ　ａｎｄ　ｔｈｅ　３ｒｄ　ｏｎｅ．．．．　Ｉ　ｃａｎ　ｓｅｌｌ　ｙｏｕ　ｔｈｅ　３ｒｄ　ｏｎｅ　ａｎｄ　Ｉ　ｗａｎｔ　ｔｏ　ｋｅｅｐ　ｔｈｅ　２ｎｄ　ｏｎｅ．．．　ｓｏ ...

but made by proline bor, should be ordered from world model gar

If I am correct, you can order from world model, you may need to wait for a few weeks (depends on the rountine shipping date), while I were still playing the Kyosho Mad Force, I ordered once from them, it was about $160 each.

作者: mikewu 時間: 2007-8-16 10:32

原帖由 anes 於 2007-8-16 06:26 發表

 登錄/註冊後可看大圖

but made by proline bor, should be ordered from world model gar

If I am correct, you can order from world model, you may need to wait for a few weeks (depends on the rountine shipping date), ...

Jet also sell Proline items as well..... and the fact is, I DID get my FJ40 body (2nd photo) from them..... Just need to order.....

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)