RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: TB EVO V 配23T 有乜好gear ratio? [打印本頁]

作者: info2victor 時間: 2007-8-25 00:09
標題: TB EVO V 配23T 有乜好gear ratio?
幫個friend 架tt01d 配o左set 24/25T 55/58T gear, 攪到小弟都心思思想配返set。

一check 之下發現唔同車唔同motor 都有唔同配搭，所以想請教o下各位師兄師姐有乜好介紹

小弟架係TB EVO 5，用緊tamiya 23T TZ。

Thanks!

作者: li5115 時間: 2007-8-25 01:05

原帖由 info2victor 於 2007-8-25 00:09 發表

 登錄/註冊後可看大圖

幫個friend 架tt01d 配o左set 24/25T 55/58T gear, 攪到小弟都心思思想配返set。

一check 之下發現唔同車唔同motor 都有唔同配搭，所以想請教o下各位師兄師姐有乜好介紹

小弟架係TB EVO 5，用緊tamiya ...

睇說明書第16頁
http://bbs.rc-evo.com/viewthread.php?tid=52772&extra=page%3D1

作者: shungyan 時間: 2007-8-25 01:12
5.6x la. Divide it by the internal gear ratio. Then the number left is the ratio of spur and motor gear

作者: 烈火之魂 時間: 2007-8-25 02:01

原帖由 shungyan 於 2007-8-25 01:12 發表

 登錄/註冊後可看大圖

5.6x la. Divide it by the internal gear ratio. Then the number left is the ratio of spur and motor gear

5.6就103/39

作者: cHRisTiAN 時間: 2007-8-25 02:15

原帖由 烈火之魂 於 2007-8-25 02:01 發表

 登錄/註冊後可看大圖

5.6就103/39

計錯數.
用103咪要執執二樓板?

: 登錄/註冊後可看大圖

作者: info2victor 時間: 2007-8-25 20:17
wow, thanks guys for the information.

I heard that different motors have different optimum gear combination, so I wonder if using different gears but achieving the same ratio matters...

Anyway, I've just checked my tamiya 23T TZ box and it suggests 35T pinion and 72T spur. Anyway have different ideas for that?

Actually there is a limitation on the choice of spur since if it is too big, it won't fit in the EVO V boards...

作者: xrvct 時間: 2007-8-25 22:24
tb5用TZ搭配5.5左右齒比應該無問題，摩打應該吾會好熱

作者: info2victor 時間: 2007-8-26 00:21
o thanks! so which pinion and spur combination should I get?

I've just checked my manual and noticed an equation for finding gear ratio. After plugging in the suggested gear combination by the motor, I have 5.01:1... would it be too much to the motor?

作者: 觀星是答案 時間: 2007-8-26 01:29

原帖由 info2victor 於 2007-8-26 00:21 發表

 登錄/註冊後可看大圖

o thanks! so which pinion and spur combination should I get?

I've just checked my manual and noticed an equation for finding gear ratio. After plugging in the suggested gear combination by the ...

齒比太快, 摩打大 loading 會好熱, 好易整死摩打同 ESC

作者: shungyan 時間: 2007-8-27 00:19
5.01:1. is too much!

作者: 烈火之魂 時間: 2007-8-27 20:54

原帖由 cHRisTiAN 於 2007-8-25 02:15 發表

 登錄/註冊後可看大圖

計錯數.
用103咪要執執二樓板?

計錯左

係牙二樓板要執執佢架~不過最大103好喇~再大就到地架喇

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)