RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: DIY Rally Waterproof Inside Cover (for TKO rally) [打印本頁]

作者: PRiNCe 時間: 2007-8-25 00:13
標題: DIY Rally Waterproof Inside Cover (for TKO rally)
my new invention..very useful for dirty conditions at TKO

Cut bonaqua bottle in half and fit to size of TT01 chassis

登錄/註冊後可看大圖

Add velcro 'magic stick'

登錄/註冊後可看大圖

Check size and trim for moving parts (steering)

登錄/註冊後可看大圖

Finish!!

登錄/註冊後可看大圖

hope this is useful!

作者: TJ~1 時間: 2007-8-25 00:16
會唔會太大....你用咩殼

作者: PRiNCe 時間: 2007-8-25 00:18

原帖由 TJ~1 於 2007-8-25 00:16 發表

 登錄/註冊後可看大圖

會唔會太大....你用咩殼

用 EVO 4/Skyline Nismo no problem

作者: TJ~1 時間: 2007-8-25 00:21
但但但....後面唔係通嫁咩....
都應該會有少少沙入嫁WOR

可惜我星期日黎唔到啦
睇唔到你既作品....

作者: PRiNCe 時間: 2007-8-25 00:23

原帖由 TJ~1 於 2007-8-25 00:21 發表

 登錄/註冊後可看大圖

但但但....後面唔係通嫁咩....
都應該會有少少沙入嫁WOR

可惜我星期日黎唔到啦
睇唔到你既作品....

The rear wheel does not move 'backwards' (no reverse) so does not spray sand into the front direction

it will spray out the rear..all design problems are considered haha

[ 本帖最後由 PRiNCe 於 2007-8-25 00:37 編輯 ]

作者: TJ~1 時間: 2007-8-25 00:24

原帖由 PRiNCe 於 2007-8-25 00:23 發表

 登錄/註冊後可看大圖

The rear wheel does move 'backwards' (no reverse) so does not spray sand into the front direction it will spray out the rear..all design problems are considered haha

一字記之曰....勁~!!

作者: paulaner 時間: 2007-8-25 00:26
Good DIY Waterproof for TT01! Thank you for your share!

作者: li5115 時間: 2007-8-25 00:28
What about the bottom? Anyway 真係唔夠你玩

作者: PRiNCe 時間: 2007-8-25 00:36

原帖由 li5115 於 2007-8-25 00:28 發表

 登錄/註冊後可看大圖

What about the bottom? Anyway 真係唔夠你玩

bottom use 'duct tape' lor

and also leave some space for 'breathing' and 'heat release'

also the wheels cannot move 'backwards' because i have no reverse so no sand will spray into the open area

[ 本帖最後由 PRiNCe 於 2007-8-25 00:38 編輯 ]

作者: li5115 時間: 2007-8-25 00:43

原帖由 PRiNCe 於 2007-8-25 00:36 發表

 登錄/註冊後可看大圖

bottom use 'duct tape' lor and also leave some space for 'breathing' and 'heat release'

also the wheels cannot move 'backwards' because i have no reverse so no sand will spray into the ...

做多小小工夫，做多個向後。

作者: J 時間: 2007-8-25 02:25
so cute, nice work!

作者: SunLi 時間: 2007-8-25 02:37
Team Bonaqua

good job!!

作者: rk2 時間: 2007-8-25 13:23
clever boy !

作者: PRiNCe 時間: 2007-8-25 17:57
thank you all

will test at TKO tomorrow

作者: TJ~1 時間: 2007-8-26 01:03
聽日我黎唔到 .....
影多幾張相...
test 前同 test 後

作者: doooouglas 時間: 2007-8-26 01:07
創意無限....支持diy~~

作者: PRiNCe 時間: 2007-8-26 20:37
Tested today, very effective for keeping stones out ~ highly recommended

作者: TJ~1 時間: 2007-8-27 00:56

原帖由 PRiNCe 於 2007-8-26 20:37 發表

 登錄/註冊後可看大圖

Tested today, very effective for keeping stones out ~ highly recommended

果個係幾多升既水黎嫁?

作者: doooouglas 時間: 2007-8-27 11:18
我尋日玩馬路都玩到有唔少砂粒飛晒入去個車架度
水樽己經買了~可以準備開工
PRiNCe 師兄, 水樽底部係咪開空佢都冇大問題呢?

作者: ice1234 時間: 2007-8-27 11:21
用佢當殼錦裝好wow

作者: PRiNCe 時間: 2007-8-27 14:19

原帖由 TJ~1 於 2007-8-27 00:56 發表

 登錄/註冊後可看大圖

果個係幾多升既水黎嫁?

5 litre Bonaqua

作者: PRiNCe 時間: 2007-8-27 14:22

原帖由 doooouglas 於 2007-8-27 11:18 發表

 登錄/註冊後可看大圖

我尋日玩馬路都玩到有唔少砂粒飛晒入去個車架度
水樽己經買了~可以準備開工
PRiNCe 師兄, 水樽底部係咪開空佢都冇大問題呢?

if you do not reverse the car, sand will not fly into the chassis from the back. It is a very easy job, cut in half and stick to chassis

hope it works for you

作者: monkichi0210 時間: 2007-8-27 16:06

原帖由 PRiNCe 於 2007-8-25 00:13 發表

 登錄/註冊後可看大圖

my new invention..very useful for dirty conditions at TKO

Cut bonaqua bottle in half and fit to size of TT01 chassis

登錄/註冊後可看大圖

Add ...

bro. prince,

great DIY job man!!!

after reading the post....i have some idea come out........just look it's good or not..........

作者: PRiNCe 時間: 2007-8-28 01:16

原帖由 monkichi0210 於 2007-8-27 16:06 發表

 登錄/註冊後可看大圖

bro. prince,

great DIY job man!!!

after reading the post....i have some idea come out........just look it's good or not..........

Also very good idea..but, if fully closed - no place for motor to 'breathe' may overheat

you can try to modify and test

作者: agentjerry 時間: 2007-9-6 21:33

原帖由 PRiNCe 於 2007-8-25 00:13 發表

 登錄/註冊後可看大圖

my new invention..very useful for dirty conditions at TKO

Cut bonaqua bottle in half and fit to size of TT01 chassis

登錄/註冊後可看大圖

Add ...

pls comment yr invention

is it work?

作者: raymen 時間: 2007-9-6 22:41
Put around 5mm Diameter circle hole clear the Heat sink and near the motor cooling fan may be better....

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)