RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: My customize little monster [打印本頁]

作者: 宏 時間: 2006-3-13 02:25
標題: My customize little monster
由本身1/18的官方比例, 全面改裝加大至1/10及1/8的自定比例
車架: 自制T-back式車架
波箱: 經改裝後變成有頭尾輸出的雙星貨車用之3速波箱
摩打: Yokomo 35T Drift 摩打
車擔: TLT,頭尾牙差已鎖
傳動軸 : Traxxas Half Shaft
狗骨杯 : Tobee craft 64mm
拉桿: TLT + 10mm 電腦底板用金屬柱
油壓  : Topcad 120mm damper
呔/鈴 : Kyosho 1/10
         HPI 1/8 (與Tobee 14mm 6角並用)
Sevro : Bule Bird 620MG
電變  : 雙星101BK
遙控  : Sanwa 4ch system
其他周邊零件皆由TLT取材

[ 本帖最後由宏於 2006-3-17 06:47 編輯 ]

作者: J 時間: 2006-3-13 02:35
cool! the ultimate crawler!
How much time have you spent working on this project?

作者: 宏 時間: 2006-3-13 03:30

原帖由 J 於 2006-3-13 02:35 發表
cool! the ultimate crawler!
How much time have you spent working on this project?

由上網參考搵料 ->買改裝料 ->動工 ->完成
一共用左2個幾星期~

作者: J 時間: 2006-3-13 03:38
只花兩個幾星期就搞到壇咁杰既野出黎, 好厲害...

三速爬山車, 尤如當年山豬自家製版~

作者: J 時間: 2006-3-13 03:39
係喎, 你d參考網頁可唔可以比條link(s) 黎睇睇?

作者: 宏 時間: 2006-3-13 08:31

原帖由 J 於 2006-3-13 03:38 發表
只花兩個幾星期就搞到壇咁杰既野出黎, 好厲害...
三速爬山車, 尤如當年山豬自家製版~

其實初初原意就係想嘗試造番部"山豬"出黎落水玩...
但之後發現始終好難改到咁理想,都係簡單d好~

原帖由 J 於 2006-3-13 03:39 發表
係喎, 你d參考網頁可唔可以比條link(s) 黎睇睇?

我係睇呢個論壇,參考d鬼佬改裝方法

http://www.rccrawler.com/forum/forumdisplay.php?f=20

作者: Jackson 時間: 2006-3-13 08:35
Chassis pics please!

作者: J 時間: 2006-3-13 08:43
thx for the link 遲下研究下先~

作者: mikewu 時間: 2006-3-13 10:57

原帖由 J 於 2006-3-13 08:43 發表
thx for the link 遲下研究下先~

You should meet Mr. "Ah Wung" (this post owner)..... He has a nickname of "Modify Prince"!!!!

Wonderful job dude! When are you guys playing Big Foot?? My E-zilla is READY!

作者: J 時間: 2006-3-13 11:48
cool... in Ah Wung's signature there's a Unimog modified on some kind of chassi? He really mods everything! hahaha, super...

作者: mikewu 時間: 2006-3-13 12:11

原帖由 J 於 2006-3-13 11:48 發表
cool... in Ah Wung's signature there's a Unimog modified on some kind of chassi? He really mods everything! hahaha, super...

The Unimog is based on a CC01 as far as I know......

作者: J 時間: 2006-3-13 12:19
yea, i suppose it is. i've seen Unimog body on XC.

作者: 宏 時間: 2006-3-13 13:46

原帖由 mikewu 於 2006-3-13 10:57 發表

You should meet Mr. "Ah Wung" (this post owner)..... He has a nickname of "Modify Prince"!!!!
Wonderful job dude! When are you guys playing Big Foot?? My E-zilla i ...

mike哥...你又玩我喇...

我只係一個cheap cheap的玩家而已...

作者: Edde 時間: 2006-3-13 14:46
哈!!真佩服你可三星期內完成自家改裝車,"勁"呀 ....
You are really creativity RC man.

作者: mikewu 時間: 2006-3-13 15:54

原帖由宏於 2006-3-13 13:46 發表

mike哥...你又玩我喇...
我只係一個cheap cheap的玩家而已...

You sell all your nice/rare covers then you'll be millionare la!!!

作者: 宏 時間: 2006-3-14 01:56
今日得閒落左jet行下...發現返左套補品,於是輕輕的再補補架車~

作者: coolboy 時間: 2006-3-14 02:04
哇！好正呀！真係你制嫁？？你好西利呀！勁呀！

作者: 宏 時間: 2006-3-14 02:06

原帖由 coolboy 於 2006-3-14 02:04 發表
哇！好正呀！真係你制嫁？？你好西利呀！勁呀！

死仔包...明串咀....

作者: coolboy 時間: 2006-3-14 23:30
其實長毛講得好岩！
c座要小心！
綱泥小不了！

作者: Edde 時間: 2006-3-14 23:39
喱件補品好嘢wor,加橫輪距,攀爬時無咁易反,

作者: 宏 時間: 2006-3-15 01:06

原帖由 Edde 於 2006-3-14 23:39 發表
喱件補品好嘢wor,加橫輪距,攀爬時無咁易反,

都係架...其實主要係想日後用1比8既呔鈴~

作者: pantherjovi 時間: 2006-3-15 09:52
勁!!自家制!!!下次你地玩爬,介不介意call下小弟黎学下野,我都想自家制去爬下....

作者: SPAWN 時間: 2006-3-15 18:27
我又來晒野!

[ 本帖最後由 SPAWN 於 2006-3-15 18:30 編輯 ]

作者: 宏 時間: 2006-3-17 03:29
最終形態

作者: Edde 時間: 2006-3-17 03:51
Wow! 形好....多,看似未落地 ? 攀爬應很好.
宏: 鴨寮街和興有啲 3mm 羅絲頭不銹鋼六角柱,可駁長呔尺,
對你改裝可能有幫助,賣 $1 粒,

作者: 宏 時間: 2006-3-17 06:45

原帖由 Edde 於 2006-3-17 03:51 發表
Wow! 形好....多,看似未落地 ? 攀爬應很好.
宏: 鴨寮街和興有啲 3mm 羅絲頭不銹鋼六角柱,可駁長呔尺,
對你改裝可能有幫助,賣 $1 粒,

哈哈~~呢粒東東我早已成為車架既其中一件成份~

我用既10mm, total用左18粒呢~

不過都多謝你的提供~

作者: Jackson 時間: 2006-3-17 07:17
Are you still using the stock chassis? Or is it another chassis?

作者: Edde 時間: 2006-3-17 15:35

原帖由宏於 2006-3-17 06:45 發表

我用既10mm, total用左18粒呢~

Oh! Great.

作者: SPAWN 時間: 2006-3-17 20:58

原帖由 Jackson 於 2006-3-17 07:17 發表
Are you still using the stock chassis? Or is it another chassis?

原裝車架可以話係垃圾!可以掉得!亦都可以用來改.而佢lee個就DIY野來!

[ 本帖最後由 SPAWN 於 2006-3-17 20:59 編輯 ]

作者: 宏 時間: 2006-3-17 23:55

原帖由 Jackson 於 2006-3-17 07:17 發表
Are you still using the stock chassis? Or is it another chassis?

That chassis is my DIY "T-back"...

作者: SPAWN 時間: 2006-3-18 01:25

原帖由宏於 2006-3-17 23:55 發表

That chassis is my DIY "T-back"...

都好大條下WO!

作者: Jackson 時間: 2006-3-18 03:49
Did you guys change to stampede transmission? The stock tranny is no good for crawling...belt drive...

作者: PRiNCe 時間: 2006-3-18 04:05

原帖由 Jackson 於 2006-3-17 19:49 發表
Did you guys change to stampede transmission? The stock tranny is no good for crawling...belt drive...

Why is the stampede transmission good for crawling (do you mean the magnum 2.72?)

oh and the crawler looks much better with the bigger black wheels

good job man!

作者: Jackson 時間: 2006-3-18 06:45
The stock tranny is belt drive, not very efficient. The belt slips and rips very easily. The pede tranny is a geared tranny and also accepts traxxas slider driveshafts, so it is the best tranny for modding.

I have the pede tranny in my tube frame TLT...also have another one sitting around with my spare TLT axles. Maybe if I have time tonight, I will whip something up.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)