RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: My AWD Photo [打印本頁]

作者: hkopium 時間: 2006-3-15 17:48
標題: My AWD Photo
Kyosho Mini-Z AWD - Small but lovely

:

- ATM AWD Stock motor
- Full bearings + Ti64 Center Shaft
- 0 front toe / 1.5 rear toe <--- 好灣好多!
- Camber = 0
- Spring: hard front + medium rear
- Tyres: 3Racing 10 度.

車頭:

登錄/註冊後可看大圖

車尾:

登錄/註冊後可看大圖

DIY blue color Kyosho Brake disc:

登錄/註冊後可看大圖

These are the drift tyres on Kyosho alloy rims, sort of like ABS...

登錄/註冊後可看大圖

比老婆知道我加左咁多野, 肯定車毀人亡

[ 本帖最後由 hkopium 於 2006-3-15 17:51 編輯 ]

作者: gegegum 時間: 2006-3-15 18:03
4氣飄移鈴好靚喎! o係邊度買架? 係唔係金屬架?

作者: hkopium 時間: 2006-3-15 18:07

原帖由 gegegum 於 2006-3-15 18:03 發表
4氣飄移鈴好靚喎! o係邊度買架? 係唔係金屬架?

Kyosho 出既合金鈴. 極x 有得賣.

作者: minesr34gtr 時間: 2006-3-15 18:47
嘩~~好多補品呀~~^^
ATM AWD Stock motor幾$呀
係米快好多呀？係米要加fet先用到架~

作者: hkopium 時間: 2006-3-15 20:11

原帖由 minesr34gtr 於 2006-3-15 18:47 發表
嘩~~好多補品呀~~^^
ATM AWD Stock motor幾$呀
係米快好多呀？係米要加fet先用到架~

係快好多!

好似係 $180.-, 貴但值.

不過, 用 ATM Motor 一定要換鈦或 Carbon 中 shaft. 否則條 shaft 會比磁力食住. 仲有, 換中 shaft = 全車解體先換到. 幾煩架.

唔洗換 FET.

但 ATM motor 好熱, 最好換埋 alloy motor 座 3 件野.

作者: 野草 時間: 2006-3-15 20:24
你架車可唔可以大飄呀?
同埋飄果時快唔快呀?

作者: hkopium 時間: 2006-3-15 20:40

原帖由野草於 2006-3-15 20:24 發表
你架車可唔可以大飄呀?
同埋飄果時快唔快呀?

未知. 未落過場.

係屋企木地板可以漂到兩野... 不能作準.

作者: 野草 時間: 2006-3-15 20:44
因為我都想買返架黎飄下過引下
所以咪問下你睇下要買D咩囉

作者: hkopium 時間: 2006-3-15 21:25

原帖由野草於 2006-3-15 20:44 發表
因為我都想買返架黎飄下過引下
所以咪問下你睇下要買D咩囉

理論上, AWD + 漂移呔 = 已經足夠.

其他野, 唔一定要. 睇 budget, 個人喜好, 同駕駛方法.

作者: 野草 時間: 2006-3-15 21:29
真係咁簡單=.=?
想架車高速咁飄呢?

作者: hkopium 時間: 2006-3-15 21:57

原帖由野草於 2006-3-15 21:29 發表
真係咁簡單=.=?
想架車高速咁飄呢?

換 motor + 上面我果堆 hop ups (Alloy motor 座, 鈦中 shaft... etc) + 心機攪 settings ...

作者: 野草 時間: 2006-3-15 22:48
可唔可以用中文小弟真係唔明

作者: minesr34gtr 時間: 2006-3-16 00:12
alloy motor 座 3 件野, 鈦中 shaft
幾$度呀~
原來換motor,仲要買咁多野~好傷呀~~~

作者: hkopium 時間: 2006-3-16 00:47

原帖由 minesr34gtr 於 2006-3-16 00:12 發表
alloy motor 座 3 件野, 鈦中 shaft
幾$度呀~
原來換motor,仲要買咁多野~好傷呀~~~

換 Kyosho 隻 Xspeed 可能會格算 D. 唔知磁力有無 ATM 隻 motor 咁利害同熱. (要等其他用者告知)

最煩係換中軸, 要差不多拆開哂成架車, D 電線分佈好似比 02MM 更繁密, 要好小心去拆. 由其係其中有四粒細羅C, 係塊電路板下面, 唔小心好易整斷電線.

價錢唔記得, 因為一大堆野咁買.

作者: mikewu 時間: 2006-3-16 00:52
Hehehe...... I am going to tell your wife next time when I see her....

I will show her mine and tell her to compare yours and she will be very easy to find out how much modification parts you got!!!

Wanna do a B-ball court drift with AWD someday and try it out??
BTW, what kind of tires are those? I have never seen that kinda drift tires before.....

作者: gegegum 時間: 2006-3-16 09:54

原帖由 hkopium 於 2006-3-15 18:07 發表

Kyosho 出既合金鈴. 極x 有得賣.

咁幾多錢兩呀?

作者: hkopium 時間: 2006-3-16 10:01

原帖由 mikewu 於 2006-3-16 00:52 發表
Hehehe...... I am going to tell your wife next time when I see her.... I will show her mine and tell her to compare yours and she will be very easy to find out how much modification parts you go ...

2-5 boy!?

Sure bro, how about Friday night? Haven't touched my Yokomo for awhile. I will bring both cars.

Those installed on the AWD are not drift tryes, those are 3Racing racing tryes.
Those installed on the alloy wheels, off the car, are drift tyres.

作者: mikewu 時間: 2006-3-16 10:16

原帖由 hkopium 於 2006-3-16 10:01 發表

2-5 boy!?

Sure bro, how about Friday night? Haven't touched my Yokomo for awhile. I will bring both cars.

Those installed on the AWD are not drift tryes, those are 3Racing racing tryes ...

I'll let you know Friday.... and you better not bring your wife... or you can pay me with some "mouth covering" fee..........

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)