RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: AX-10 crawler kit test run in HK. (All Done) [打印本頁]

作者: edison 時間: 2007-9-18 22:20
標題: AX-10 crawler kit test run in HK. (All Done)
AX-10 carwler kit

登錄/註冊後可看大圖

MG995 x 2
Skyone Lightning 38 Brushless controller x1
HyperiOh...oh...85kv outrunner Motor x1

登錄/註冊後可看大圖

Stage 1 finished

登錄/註冊後可看大圖

Video here: http://www.youtube.com/watch?v=qEYD8Cni3RE

[ 本帖最後由 edison 於 2007-10-14 23:42 編輯 ]

作者: 0433351410 時間: 2007-9-18 22:26
so good ar

how much u buy ar?

作者: edison 時間: 2007-9-18 22:30

原帖由 0433351410 於 2007-9-18 22:26 發表

 登錄/註冊後可看大圖

so good ar
how much u buy ar?

Total HKD 2100 including shipping cost

作者: 0433351410 時間: 2007-9-19 00:09

原帖由 edison 於 2007-9-18 22:30 發表

 登錄/註冊後可看大圖

Total HKD 2100 including shipping cost

HKD 2100 including shipping cost?
Woo... not really expensive(poisoning

)
is it not including the motor and the esc?

作者: ken8298 時間: 2007-9-20 00:55
都算平喎.我見KWS有幾間都有

作者: 0433351410 時間: 2007-9-20 03:00
which shop have got ar brother i really really want to get one

作者: 0433351410 時間: 2007-9-20 03:08
i don't think is come with the 電子野 because i download the menu and check already

作者: ken8298 時間: 2007-9-20 03:18
貓貓個間會有.唔知有無貨係度

作者: edison 時間: 2007-9-20 12:43

原帖由 VeilSide 於 2007-9-20 03:23 發表

 登錄/註冊後可看大圖

其實咁細架會唔會唔好爬?

I can say, It is very very 好爬!!!!!
I have 1/8 size Crawler before, but the AX10 is much funny then the 1/8!!!!

作者: 0433351410 時間: 2007-9-20 15:21

原帖由 edison 於 2007-9-20 12:43 發表

 登錄/註冊後可看大圖

I can say, It is very very 好爬!!!!!
I have 1/8 size Crawler before, but the AX10 is much funny then the 1/8!!!!

Hi edison
I also got a "Super Clod Buster" and with the car and the parts is already cost me $3xxx+ to set up the car and still not really good.
Can u tell me how is the size of the AX10 look like and where did u buy AX10 because i really want to get one

.
Thank you so much for your help

作者: bigben 時間: 2007-9-20 15:42
極x (或旁邊個間) ... 總之大d果間有售

作者: 0433351410 時間: 2007-9-20 16:23
Ho........ thank you very much for your help brother

作者: rockdragon 時間: 2007-9-21 00:12
I was in KWS at the Cat shop. They said the AX10 is coming for sell soon and the price will be under 2000.

Until then ....... the local buyers will have to wait because so far ..... no stock is sending out from USA.

作者: rockdragon 時間: 2007-9-21 00:33

原帖由 VeilSide 於 2007-9-21 00:15 發表

 登錄/註冊後可看大圖

$2000係咪includ esc,servo,motor架?

If the kit coming to HKG is the same as the one selling in the USA at a moment, then all pieces included in the package will be exactly like this one here....

click this link for see all photos of parts come inside the box.

http://9turbo.net/board2007/index.php?topic=44906.0

登錄/註冊後可看大圖

[ 本帖最後由 rockdragon 於 2008-1-7 12:05 編輯 ]

作者: kaho0338 時間: 2007-9-21 00:55
may i know is it as big as TNT ? or it is a TLT size ?

thanks

作者: rockdragon 時間: 2007-9-21 01:13
Here ... at the side of the box explains what extra things are required to complete this AX10 kit.

登錄/註冊後可看大圖

作者: eason 時間: 2007-9-21 01:32
I saw "Challenger" have one in the display cabinet

作者: rockdragon 時間: 2007-9-21 08:51

原帖由 eason 於 2007-9-21 01:32 發表

 登錄/註冊後可看大圖

I saw "Challenger" have one in the display cabinet

That is the only empty box and been there since last week. The truck with RED shock is at the bottom shelf.

So far they have no stock in for sell yet.

作者: edison 時間: 2007-9-21 09:32

原帖由 rockdragon 於 2007-9-21 00:12 發表

 登錄/註冊後可看大圖

I was in KWS at the Cat shop. They said the AX10 is coming for sell soon and the price will be under 2000.

Until then ....... the local buyers will have to wait because so far ..... no stock is sen ...

Under HKD2000????

作者: ken8298 時間: 2007-9-22 01:32

原帖由 edison 於 2007-9-21 09:32 發表

 登錄/註冊後可看大圖

Under HKD2000????

算啦唔爭好多姐.起碼你玩左先啦.仲有你比到測試資料其他想買呢架車既人

作者: kaho0338 時間: 2007-9-22 02:03
我其實想知佢同TXT 的車身大小差多少.....
條軚又係乜size 呢?
2k 真係好吸引......

作者: ken8298 時間: 2007-9-22 02:36
你可以去智X睇睇門口右手面最下
條呔係2.2size

作者: Brushless 時間: 2007-9-22 02:59
I'm very interested too

作者: edison 時間: 2007-9-22 08:57

原帖由 ken8298 於 2007-9-22 01:32 發表

 登錄/註冊後可看大圖

算啦唔爭好多姐.起碼你玩左先啦.仲有你比到測試資料其他想買呢架車既人

The Cat shop say the price is about HKD 1900

作者: edison 時間: 2007-9-22 09:03
AX-10 Features:

Complete competition ready kit
All new axles that feature an improved driveshaft angle and castor as well as class leading steering throw
Aluminum Chassis plates with a molded nylon skid plate
Ultra compact and lightweight transmission
Full time locked four wheel drive (kit comes with diff lockers stock)
Full Ball bearings
Overall gear ratio range from 15:1 to 74:1
Transmission: 2.6:1; center mounted
Differentials: Locked style (spool)
Transmission: Single-speed
Tires: Axial 2.2 Rock Lizards
Wheels: Axial 2.2 Rockster Beadlocks
Suspension: 3 Link
Drive Shafts: Universal front and rear

Chassis
Wheelbase: 304mm~320mm (12”~12.6”)
Width: 254mm (10”)
Height: 156mm (6.125”)
Weight: 1588g (3.5 lbs)
Articulation: 70°
Ground Clearance: 79mm (3.125”)

Body
Length: 438mm (17.25”)
Width: 181mm (7.125”)
Height: 133mm (5.25”)

Electronics (Not Included)
Radio: 2 Channel
Servos: 1 (Standard Size)
Speed Control
Motor: 540/550 Size
Battery: 7.2v Stick Pack

Axial has designed a completely new kit from the ground up. Each detail has been well thought out and provides you with a solid base to work with.

Axles
The axles have been designed with many features that are not available from other choices on the market. Everything from the axle strength, pinion angle, caster, and ground clearance were taken into consideration, the result is a stronger better axle that will last. An aluminum diff locker is included along with hardened drive shafts and axles.

Chassis
The AX10 Scorpion chassis is lightweight and stiff. Twin 2.0mm aluminum side plates are tied together with aluminum posts and a molded nylon skid plate/transmission plate. The chassis was made as small and compact as possible to cut weight as much as possible. A simple battery/radio tray makes installation of your electronics quick and easy. Wheel base is adjustable from 304mm ~ 320mm.

Transmission
The AX10 Scorpion transmission was designed to place the weight of the motor as low as possible while still allowing a wide range of gearing choices. The overall ratio can be adjusted from 15:1 all the way up to 74:1 using different pinion/spur gear choices. The transmission is locked with no differential action and features hard anodized aluminum out-drive shafts.

Shocks, Links and Driveshaft
Super long shocks offer a wider range of articulation as well as an optional range of spring choices so you can tune your crawler to work on any terrain. All suspension links are made from lightweight and strong aluminum. The driveshaft is made from super strong composite material and features hardened metal yokes.

Wheels, Tires and Body
No crawler would be complete without the essentials. The AX10 Scorpion will be outfitted with the popular 2.2 Rockster beadlocks sporting green rock rings and Rock Lizard tires. Also included is the popular B-17 Betty body in .040” thick polycarbonate.

作者: owl 時間: 2007-9-22 13:28
請問依家KWS有冇現貨？我又想買架玩

作者: edison 時間: 2007-9-22 13:33
the cat shop say need waiting about 2 week!

作者: owl 時間: 2007-9-22 13:46
標題: 回復 35# 的帖子
Thank you u
另外我想問，我有個Novak Super Duty，放得落嗎？我見你隻esc好細隻。

作者: edison 時間: 2007-9-22 13:50

原帖由 owl 於 2007-9-22 13:46 發表

 登錄/註冊後可看大圖

Thank you u
另外我想問，我有個Novak Super Duty，放得落嗎？我見你隻esc好細隻。

You need install the ESC in the upper plate!

作者: edison 時間: 2007-9-22 21:56
Phase 2

1.Add Battery plate on the font axial

登錄/註冊後可看大圖

2. Add 3rd CH to the rear axial

登錄/註冊後可看大圖

Here is the drawing of the Battery plate to share to all carwler buddies

登錄/註冊後可看大圖

作者: kaho0338 時間: 2007-9-22 22:05

原帖由 edison 於 2007-9-22 21:56 發表

 登錄/註冊後可看大圖

Phase 2

1.Add Battery plate on the font axial

登錄/註冊後可看大圖

登錄/註冊後可看大圖

2. Add 3rd CH to the rea ...

thanks share ar

師兄, 我想知架ax10 有冇你相後面個fan 今大呢? 定大過呢?
thanks

作者: 0433351410 時間: 2007-9-22 22:08
To day i order form the cat shop he said will be have stock at the end of next week (i hope it will be

) is cost me $1900
and i ask the other shop (自樂) they have the stock but $2800

almost $1000 different then the cat cat shop which one will u choice
i choice wait:Q :Q :Q

作者: ken8298 時間: 2007-9-22 22:50
呢架車都好多人有興趣喎
如買左既一齊玩

作者: edison 時間: 2007-9-22 23:05

原帖由 VeilSide 於 2007-9-22 22:56 發表

 登錄/註冊後可看大圖

thanks share ar
師兄, 我想知架ax10 有冇你個頭今大呢? 定大過呢?
thanks

The size is smaill then my Spider.
Spider size is 1/8
AX10 is 1/10

Chassis
Wheelbase: 304mm~320mm (12”~12.6”)
Width: 254mm (10”)
Height: 156mm (6.125”)
Weight: 1588g (3.5 lbs)
Articulation: 70°
Ground Clearance: 79mm (3.125”)

作者: kaho0338 時間: 2007-9-22 23:08

原帖由 VeilSide 於 2007-9-22 22:56 發表

 登錄/註冊後可看大圖

thanks share ar
師兄, 我想知架ax10 有冇你個頭今大呢? 定大過呢?
thanks

don't play la......TLT also bigger than your head...

作者: 0433351410 時間: 2007-9-22 23:22
i already saw the tie is not really big (i think is 13 cm about) but is enough to play i think can be use the bigger one
and the car is shorter then the box 3 to 5 cm

作者: edison 時間: 2007-9-25 23:50
Tuber chassis custom make.
I planning to make 20 sets Tuber chassis for 2.2 Crawler.
Here is some photos for first hand sample, still need modify a bit.

This Tuber chassis kit can direct replace the AX10 chassis.
No DIY, No Drill.
also support TLT. Wheel King... all 2.2 size.
The color is Black.

Please reply or PM the Post to let me know!!!

Rev 3 photos here:
The all detail is coming to finish, still need some size need to improve.
hopefully, this Sunday can upload the test run movie.

登錄/註冊後可看大圖

作者: edison 時間: 2007-9-27 14:47
I got the final revision today, and will testing tonight.

I will posts move photos tonight to show how to replace origin chassis.

登錄/註冊後可看大圖

作者: edison 時間: 2007-9-27 23:18
Ready to install !

登錄/註冊後可看大圖

Motor plate size is very fit!

登錄/註冊後可看大圖

install the lower rod first!

登錄/註冊後可看大圖

and then install the upper rod.

登錄/註冊後可看大圖

Finish.

登錄/註冊後可看大圖

[ 本帖最後由 edison 於 2007-9-27 23:22 編輯 ]

作者: edison 時間: 2007-9-28 17:50
Any brother have interesting for this chassis!!
4sets only right now!!

作者: edison 時間: 2007-9-29 22:46
Tuber chassis test run

Video here:
http://www.youtube.com/watch?v=l0h7Z6pOjhE

登錄/註冊後可看大圖

作者: toto 時間: 2007-9-29 23:58
請問C兄.2.2是什麼意思,同這個車架有幾長,唔該?

作者: kaho0338 時間: 2007-9-30 04:46

原帖由 toto 於 2007-9-29 23:58 發表

 登錄/註冊後可看大圖

請問C兄.2.2是什麼意思,同這個車架有幾長,唔該?

# Wheelbase: 304mm~320mm
# Width: 254mm
# Height: 156mm
# Weight: 1588g

[ 本帖最後由 kaho0338 於 2007-9-30 04:53 編輯 ]

作者: edison 時間: 2007-9-30 11:59

原帖由 toto 於 2007-9-29 23:58 發表

 登錄/註冊後可看大圖

請問C兄.2.2是什麼意思,同這個車架有幾長,唔該?

The Carwler world have 2 scales:
1 is 2.2 about 1:10 scale, and also 2.2 is mean the radius of the tire.

登錄/註冊後可看大圖

2 is super class about 1:8 scale

登錄/註冊後可看大圖

[ 本帖最後由 edison 於 2007-9-30 12:02 編輯 ]

作者: kaho0338 時間: 2007-10-1 01:04

原帖由 edison 於 2007-9-30 11:59 發表

 登錄/註冊後可看大圖

The Carwler world have 2 scales:
1 is 2.2 about 1:10 scale, and also 2.2 is mean the radius of the tire.

登錄/註冊後可看大圖

2 is super class about 1 ...

我見智樂出左支topcad 油壓比ax10 呀 $280.....內置彈弓, 綠色金屬身

唔知入唔入好

topcad

[ 本帖最後由 kaho0338 於 2007-10-1 01:10 編輯 ]

作者: edison 時間: 2007-10-8 12:41
自家制AX10 改裝車架(合所有1:10慢爬車用)
This Tuber chassis kit can direct replace the AX10 chassis.
On sell Now!

http://bbs.rc-evo.com/viewthread.php?tid=58467&extra=page%3D1

[ 本帖最後由 edison 於 2007-10-13 13:03 編輯 ]

作者: edison 時間: 2007-10-13 13:04
The tube being production!

登錄/註冊後可看大圖

作者: edison 時間: 2007-10-14 23:36
Final stage!

Add total 240g lead on each font wheel, Two font wheel total 480g.

登錄/註冊後可看大圖

Shock modify " internal springs"

登錄/註冊後可看大圖

Body painting "太極" :32:

登錄/註冊後可看大圖

作者: 馬田 時間: 2007-10-15 00:51
好正.. 想問下d小彈弓邊到找到~ thanks

作者: edison 時間: 2007-10-15 11:40

原帖由馬田於 2007-10-15 00:51 發表

 登錄/註冊後可看大圖

好正.. 想問下d小彈弓邊到找到~ thanks

This is factory sample.

作者: v305304 時間: 2008-1-4 11:07
標題: 回復 32# 的帖子
C Hing Cat shop 即係邊間舖呢?請問有無中文舖頭名,我來自澳門,唔知該店有現貨未,想打個電話問吓.

作者: edison 時間: 2008-1-4 12:38

原帖由 v305304 於 2008-1-4 11:07 發表

 登錄/註冊後可看大圖

C Hing Cat shop 即係邊間舖呢?請問有無中文舖頭名,我來自澳門,唔知該店有現貨未,想打個電話問吓.

Cat shop is RC Model shop.
you also can going to Hang sing, and chai lok to buy!

作者: v305304 時間: 2008-1-4 14:11

原帖由 edison 於 2008-1-4 12:38 發表

 登錄/註冊後可看大圖

Cat shop is RC Model shop.
you also can going to Hang sing, and chai lok to buy!

唔該晒!

作者: v305304 時間: 2008-1-7 17:18

原帖由 edison 於 2008-1-4 12:38 發表

 登錄/註冊後可看大圖

Cat shop is RC Model shop.
you also can going to Hang sing, and chai lok to buy!

C Hing 我前日已經過嚟香港買咗啦,十分唔該提供意見,現想請教用邊一種電變玩慢爬比較好,我用80T有擦摩打.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)