標題: King 2 with 9CHP setting [打印本頁] 作者: uniquexme 時間: 2007-9-20 14:05 標題: King 2 with 9CHP setting Guys, i have just got a 9CHP, eksy HH gyro, brushless. i was installingmy brushless and receiver last nite, having a hard time installing3800kv esky in it. keke... but managed to get it done, now i want toask all sifu here a few questions:
1. futaba 149 receiver, how do we connect the servo to which channel? coz i used the same channel as per esky instruction manual
2.Esky 0704A HH Gyro, how come the wire is not white and black, butorange and brown? so which color shd we plug into the receiver? andalso there is one sensing socket to be plug into ch5, with only 1 wire,which way shall we plug in?
3. so after installing all electronics, what shd i do, coz i think need to program the ESC and tx.
4. 9CHP setting, can anyone advise how to step-by-step setting for king2?
5. where do u guys mount the brushless ESC? photo would be good to show the neat wiring fixing.
thanks.作者: zifu 時間: 2007-9-20 23:26
1. 1=A 2=E 3=T 4=R 5=G 6=P
2. this is a signal wire. Same as white wire
3. Sorry I don’t know what brand of your esc.
4. Same as normal heli
5. Under bracket作者: uniquexme 時間: 2007-9-21 14:41
heh thanks, esc brand is esky brushless.
i m having a problem with my esky HH gyro as it spins crazy fast in clockwise direction. i think i need to assign a switch on the tx for HH mode, do i? can anyone tell me how to do that? thanks.
under bracket esc? then where do u fit the battery? i bought a 1800lipo but somehow canopy can't fit, help. i think someone mod it like the trex tray, can anyone teach me?作者: zifu 時間: 2007-9-21 22:42
wrong diretion.作者: uniquexme 時間: 2007-9-22 10:38
i have corrected the gyro direction, but then its like when u rudder right, it goes right and very very slowly move FULL left. is that the way HH gyro work? i try to sub-trim rudder but then its still the same. thanks.作者: zifu 時間: 2007-9-22 11:05
may be your servo too slowly. what is the servo?作者: pcwu 時間: 2007-9-23 11:49
Do I still need to trim the 'Revo Mix' if I have a HL gyro?作者: zifu 時間: 2007-9-24 00:03
inh. no need maxing. just need gyro gain.作者: uniquexme 時間: 2007-9-25 08:45
m using esky stock servo.作者: zifu 時間: 2007-9-25 10:03
i think you have not a hl gyro (silver or black)