RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Tamiya Belt Drive Buggy DB-01 DURGA [打印本頁]

作者: li5115    時間: 2007-9-22 05:17
標題: Tamiya Belt Drive Buggy DB-01 DURGA
All-new DB01 chassis locates heavy components such as battery and motor near the center for optimum weight distribution.
Race-proven and reliable 2-belt driven 4WD system is completely enclosed with ABS resin covers to prevent dirt and debris from interfering with drivetrain operations.
Chassis features integrated bulkheads, which reduces the number of parts and simplifies maintenance.
Tough ABS resin 4-wheel double wishbone suspension system features the same configuration as the TRF501X and provides a wide range of settings options.
Brand new buggy body with rear wing is made from lightweight polycarbonate material.
Wheels, tires, and Type 540 motor are included.
2-channel transmitter, ESC, running battery & charger are separately required.
作者: DriftNoobie    時間: 2007-9-22 10:36
Dark Impart Belt Drive 版,有皮帶保護 cover. 幾正喎, 有無話打算賣咩價錢左右 (HKD/Yen)?
作者: courel500    時間: 2007-9-22 11:31
ta05  buggy ver. ?!
作者: li5115    時間: 2007-9-22 12:28
平民版 501X。
作者: crusaderlyf    時間: 2007-9-22 12:34
个壳好型,早话过田宫一旦高端成功底端马上跟进,一向支持轴车传统,至414 415系列重新定义皮带车发展方向,现在出皮带BUGGY,当然要推出新系列名字DB01(Dual Belt 01)
作者: 馬達王1983    時間: 2007-9-22 23:42
什么501啊  

明明就是TA05 越野版本
作者: 星野一義    時間: 2007-9-23 16:26
個車殼好鬼型....
作者: AMAT    時間: 2007-9-24 13:33
原帖由 馬達王1983 於 2007-9-22 23:42 發表
什么501啊  

明明就是TA05 越野版本


好多配件不一......又唔可以咁講.......
作者: 馬達王1983    時間: 2007-9-25 12:14
底盘布局绝对不是501的风格
作者: aloha    時間: 2007-9-26 11:58
就咁睇要改既野都唔少,
平平地換4支油壓/萬向玩玩都應該好夠..
作者: aydinkao    時間: 2007-9-26 12:28
Chassis=TA05 Layout
Suspension system=TRF 501X
DB01=TA05+501X
DB01 Looks like LOSI XXX-4 with 2 belt
BUT compare the price and cost of options.............
LOSI XXX-4 has higher c/p...........
作者: ttyy    時間: 2007-9-27 03:41
more pics.......
作者: racal    時間: 2007-9-27 17:44
大家有冇留意到!

佢個摩打咁短身嘅 ?
作者: li5115    時間: 2007-9-27 20:46
原帖由 racal 於 2007-9-27 17:44 發表
大家有冇留意到!

佢個摩打咁短身嘅 ?

只是攝影角度問題。
作者: gibson    時間: 2007-9-27 20:48
For all the TA05 lover, this is one of a nice car to own!!
作者: PRiNCe    時間: 2007-9-28 03:26
does anybody know what will be the cost in HK when released?
作者: AMAT    時間: 2007-10-1 23:12
頭先再望真O的臂.....係501O的臂......但相信係CHEAP版,唔係炭纖版......
作者: ryancmlam    時間: 2007-10-2 00:05
原帖由 PRiNCe 於 2007-9-28 03:26 發表
does anybody know what will be the cost in HK when released?


Let's do a rough estmation. The recommended selling prices of DB01 and DF03 are US$295 and 240 respectively. The price of DB01 in HK should be around HK$750 x 295/240 = $920. At the initial beginning, the price maybe just below HK$1000.

P.S. Hotshot is US$282. HK$ = 750 x 282/240 = 882.
作者: AMAT    時間: 2007-10-2 09:42
叫平價版501X.....因為都可以用到好多501X O既零件下.....

http://blog.goo.ne.jp/taromaru32 ... 1a984713306c75d27da
作者: johnsonhong    時間: 2007-10-22 16:32
只是有感而發, 勿

其實DF03會不會因DB01出現而退役? 定係同步發展?

如是前者, 個人覺得轉款太快了, 有d浪費架車! 係咪冇地方改良, OR又係錢方法 :

如果繼續keep架DF03, 就要買定一大堆補品防絕版, 尤其係那套 05pitch齒輪和後gearbox.

如果買DB01, 又係那D option:
頭單, 中單 , TRF Damper..., low friction belt, wide pitch pulley...有d悶
當然個人喜好,因人而異!!!


玩家也好,鋪頭也好, 多得佢唔小...

只是有感而發, 勿
作者: Wallace    時間: 2007-10-22 18:30
原帖由 AMAT 於 2007-10-2 09:42 發表
叫平價版501X.....因為都可以用到好多501X O既零件下.....

http://blog.goo.ne.jp/taromaru32/e/59d10084555741a984713306c75d27da

果架"Hornet"...以為比人改做4WD, 原來係DF-03 chassis




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2