RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 養豬一問? [打印本頁]

作者: SunLi 時間: 2006-3-20 18:47
標題: 養豬一問?
最近家裏多了一隻sa豬！順利成為養豬一分子，希望各愛豬同好多多指教！
請問呢隻豬點養可以身手敏捷，好行好走？多數有什麼病疼要注意！謝謝！

作者: mark999hk 時間: 2006-3-20 19:02

原帖由 SunLi 於 2006-3-20 06:47 PM 發表
最近家裏多了一隻sa豬！順利成為養豬一分子，希望各愛豬同好多多指教！
請問呢隻豬點養可以身手敏捷，好行好走？多數有什麼病疼要注意！謝謝！

Haha~~you got a Savage finally~~good stuff~

作者: osb36 時間: 2006-3-20 19:31
pull start or roto start? if pull start, follow the instruction from manual, cos the
pull will be very easy to damage!

作者: SunLi 時間: 2006-3-20 20:15

原帖由 mark999hk 於 2006-3-20 19:02 發表

Haha~~you got a Savage finally~~good stuff~

Play with you later .....

when it is ready!!!!

[ 本帖最後由 SunLi 於 2006-3-20 20:25 編輯 ]

作者: SunLi 時間: 2006-3-20 20:18

原帖由 osb36 於 2006-3-20 19:31 發表
pull start or roto start? if pull start, follow the instruction from manual, cos the
pull will be very easy to damage!

It is roto start,......
How come the wheel setting is negative camber???

[ 本帖最後由 SunLi 於 2006-3-20 20:20 編輯 ]

作者: boogie 時間: 2006-3-20 20:30
be carful of the spur gear! it is easy to melted!

作者: Skyline 時間: 2006-3-20 21:07

原帖由 boogie 於 2006-3-20 20:30 發表
be carful of the spur gear! it is easy to melted!

yes, especially when the tranny is getting tigher ...

作者: SunLi 時間: 2006-3-20 21:25
Does it have metal spur gear for the replacement or any parts can be modified for that?

作者: WTO 時間: 2006-3-20 21:43

原帖由 SunLi 於 2006-3-20 21:25 發表
Does it have metal spur gear for the replacement or any parts can be modified for that?

HERE U GO ,
http://www2.towerhobbies.com/cgi ... mp;I=LXLST1&P=Z

http://www2.towerhobbies.com/cgi ... ;I=HPIC1858&P=Z

作者: SunLi 時間: 2006-3-20 22:06
Found out some wheels for monster truck, but most of them fit 23mm hex hubs only.

Is the 14mm wheels easy to be worn?

作者: SunLi 時間: 2006-3-20 22:07

原帖由 WTO 於 2006-3-20 21:43 發表

HERE U GO ,
http://www2.towerhobbies.com/cgi ... XLST1&

http://www2.towerhobbies.com/cgi ... C1858&

Wow......It's useful!

作者: crunch 時間: 2006-3-20 22:16

原帖由 SunLi 於 2006-3-20 22:06 發表
Found out some wheels for monster truck, but most of them fit 23mm hex hubs only.

Is the 14mm wheels easy to be worn?

Looks good and fun!! Doesn't the Savage X use 17mm hex?

作者: SunLi 時間: 2006-3-20 22:34

原帖由 crunch 於 2006-3-20 22:16 發表

Looks good and fun!! Doesn't the Savage X use 17mm hex?

Yup, it comes with 17mm hex.

作者: PRiNCe 時間: 2006-3-21 05:03
wow Savage X!! so advanced,i just realised it has a 'heatsink rollcage'!! excellent improvement over the previous models

作者: wildbruiser 時間: 2006-3-21 08:57
Recommendations to make your PIG rugged:
1. Use 24KG servo for steering
2. Use metal shock tower to reduce the chance of breaking shocks and oil tank
3. Make sure there are 4 spider gears in your diffs
4. Don't let your engine goes over 100 degree to prevent melting of your spur gear

作者: helljc 時間: 2006-3-21 09:37
好正呀! 幾多錢呀? 邊度買? 我好想買呀!

作者: SunLi 時間: 2006-3-21 10:56

原帖由 wildbruiser 於 2006-3-21 08:57 發表
Recommendations to make your PIG rugged:
1. Use 24KG servo for steering
2. Use metal shock tower to reduce the chance of breaking shocks and oil tank
3. Make sure there are 4 spider gears in you ...

Which brand of metal shock tower would be good? I can't get it in the HPI option parts list. Thanks!!!

作者: SunLi 時間: 2006-3-21 10:58

原帖由 helljc 於 2006-3-21 09:37 發表
好正呀! 幾多錢呀? 邊度買? 我好想買呀!

$36xx KWS

作者: WTO 時間: 2006-3-21 11:52

原帖由 SunLi 於 2006-3-21 10:56 發表

Which brand of metal shock tower would be good? I can't get it in the HPI option parts list. Thanks!!!

HPI option parts :
http://www.hpieurope.com/piw.php?lang=en&partNo=a712

Hotbodies, Integy MSR4
http://www2.towerhobbies.com/cgi ... p;I=HPIC1871&=Z

Enjoy...hope can help u

[ 本帖最後由 WTO 於 2006-3-21 13:47 編輯 ]

作者: SunLi 時間: 2006-3-21 14:47

原帖由 tips 於 2006-3-21 13:42 發表
good price , come with the roto start, I like it.

Let's own a sa pig for fun!

作者: SunLi 時間: 2006-3-21 15:01

原帖由 WTO 於 2006-3-21 11:52 發表

HPI option parts :
http://www.hpieurope.com/piw.php?lang=en&partNo=a712

Hotbodies, Integy MSR4
[url]http://www2.towerhobbies.com/cgi-bin/WTI0005P?&I=HPIC1871&=Z[/url ...

The savage X shock tower is a little bit different with the previous savage, it got two more holes for the pumper arms holding. I may need to wait the new metal shock tower parts coming.

Thanks!

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)