RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 等左個幾月........Axial AX10 Scorpion crawler [打印本頁]

作者: kaho0338 時間: 2007-10-30 21:45
標題: 等左個幾月........Axial AX10 Scorpion crawler
終於攪掂......

但條狗骨真係好雞... 玩左一陣已經ko 左

係時侯換e支

http://www.shop.rpphobby.com/pro ... 4&productId=620

[ 本帖最後由 kaho0338 於 2007-11-16 12:36 編輯 ]

作者: 亞標 時間: 2007-10-30 21:52
very good! how much?

作者: kaho0338 時間: 2007-10-30 21:55

原帖由亞標於 2007-10-30 21:52 發表

 登錄/註冊後可看大圖

very good! how much?

車價$1900, 我換曬d 羅絲, 加左d option, 電子野 (冇計2.4g) 約$3.5k 多d

[ 本帖最後由 kaho0338 於 2007-10-30 21:59 編輯 ]

作者: minimini 時間: 2007-10-30 23:41
where can buy the Hummer shell now ??........ Thx !!

作者: kaho0338 時間: 2007-10-31 01:20

原帖由 minimini 於 2007-10-30 23:41 發表

 登錄/註冊後可看大圖

where can buy the Hummer shell now ??........ Thx !!

my fd order the new hpi hummer H2 at jet hobby, maybe u can phone them

作者: kaho0338 時間: 2007-10-31 02:10
轉自外國forum ........

登錄/註冊後可看大圖

作者: ken8298 時間: 2007-10-31 03:31
恭喜有車玩過咁快爛野

你係邊玩.有無機會一齊玩呀
我架仲整緊呀

係CB黎架
過我week day先玩度

作者: Brushless 時間: 2007-10-31 08:49

原帖由 kaho0338 於 2007-10-30 21:55 發表

 登錄/註冊後可看大圖

車價$1900, 我換曬d 羅絲, 加左d option, 電子野 (冇計2.4g) 約$3.5k 多d

What options have you bought as the options 狗骨 is not included

[ 本帖最後由 Brushless 於 2007-10-31 08:55 編輯 ]

作者: kaho0338 時間: 2007-10-31 11:40

原帖由 Brushless 於 2007-10-31 08:49 發表

 登錄/註冊後可看大圖

What options have you bought as the options 狗骨 is not included

d option 都係d 大路野, for example : servo 頭保護x2, servo arm x 2 ..... etc 乜都打媽上, 因為遲d 改4 輪轉向

作者: kaho0338 時間: 2007-10-31 11:43

原帖由 ken8298 於 2007-10-31 03:31 發表

 登錄/註冊後可看大圖

恭喜有車玩猤過咁快爛野
你係邊玩.有無機會一齊玩呀
我架仲整緊呀係CB黎架
猤過我week day先玩度

你都係係rcmodel 訂? 返得3部咋boo....

我係住西灣河個頭, 遲d 有機會join...

我已想到d 方法fix 狗骨, 遲d post 點fix

作者: 0433351410 時間: 2007-10-31 12:46
Where can buy the option?

作者: kaho0338 時間: 2007-10-31 13:43

原帖由 0433351410 於 2007-10-31 12:46 發表

 登錄/註冊後可看大圖

Where can buy the option?

servo 頭保護個d gpm

servo arm 極速有d

[ 本帖最後由 kaho0338 於 2007-10-31 13:49 編輯 ]

作者: kaho0338 時間: 2007-10-31 14:07
三個訂左既都係曬度

作者: 0433351410 時間: 2007-10-31 21:39
i also order ar, also have been wait for 2 months but monday when the cat shop call me " Hay your car just arrive u can come and get it" i just walk past China custom (because i am warking in China"

, i need to wait till Friday to get it two more days

作者: 0433351410 時間: 2007-10-31 21:40
but where can buy the option 狗骨

作者: kaho0338 時間: 2007-10-31 23:13

原帖由 0433351410 於 2007-10-31 21:40 發表

 登錄/註冊後可看大圖

but where can buy the option 狗骨

online order only...
i will post my fix version dog bone ...pls wait

作者: kaho0338 時間: 2007-10-31 23:29
己想到點fix 左條狗骨........有2個方法
1. 去買4粒12mm 內徑既bearing
2. 去買 2 包12mm 內徑既介子, top racing 有出, x速有貨. 用介子可更details 今較厚度

下圖為方法1.....

安裝後係會令支狗骨緊d, 但經過長時間運動會有改善

作者: kaho0338 時間: 2007-11-1 01:36
add : 最好搵熱縮膠通整住粒bearing, 防止係爬時令bearing移位

作者: edison 時間: 2007-11-1 12:40
Good Idea wor!!!

作者: edison 時間: 2007-11-1 12:40
When can play it together ar?

作者: kaho0338 時間: 2007-11-1 19:19
Done....

初步test.....幾好, 冇問題

如果用spacer 會更薄, 更好, 不果貴, 又冇今直接

[ 本帖最後由 kaho0338 於 2007-11-1 19:21 編輯 ]

作者: kaho0338 時間: 2007-11-1 19:20

原帖由 edison 於 2007-11-1 12:40 發表

 登錄/註冊後可看大圖

When can play it together ar?

找日去石澳個d 玩

過一排開始放假

作者: 0433351410 時間: 2007-11-1 19:42
Which one is the servo arm ar?

作者: kaho0338 時間: 2007-11-1 19:47
暫時set 好....

作者: kaho0338 時間: 2007-11-1 20:10

原帖由 0433351410 於 2007-11-1 19:42 發表

 登錄/註冊後可看大圖

Which one is the servo arm ar?

登錄/註冊後可看大圖

e樣, gpm 同極x都有賣

作者: edison 時間: 2007-11-2 09:21
Take some photo from 石澳 first la!

原帖由 kaho0338 於 2007-11-1 19:20 發表

 登錄/註冊後可看大圖

找日去石澳個d 玩
過一排開始放假

作者: kaho0338 時間: 2007-11-2 19:16

原帖由 edison 於 2007-11-2 09:21 發表

 登錄/註冊後可看大圖

Take some photo from 石澳 first la!

登錄/註冊後可看大圖

copy from web

[ 本帖最後由 kaho0338 於 2007-11-2 19:27 編輯 ]

作者: kaho0338 時間: 2007-11-2 23:23
have a look.....

作者: edison 時間: 2007-11-3 00:15

原帖由 kaho0338 於 2007-11-2 19:16 發表

 登錄/註冊後可看大圖

登錄/註冊後可看大圖

登錄/註冊後可看大圖

http://upload.wikimedia.org/wikipedia/zh-yue/thumb/3/39 ...

Woo.... this is a good place!!!

作者: ken8298 時間: 2007-11-3 00:43
我就係想去呢度玩呀

作者: kaho0338 時間: 2007-11-3 00:56

原帖由 ken8298 於 2007-11-3 00:43 發表

 登錄/註冊後可看大圖

我就係想去呢度玩呀

go go go go go ~~~!!

作者: 0433351410 時間: 2007-11-4 02:14

原帖由 edison 於 2007-11-3 00:15 發表

 登錄/註冊後可看大圖

Woo.... this is a good place!!!

Where is it ar? Look so Good wo

:lol

作者: kaho0338 時間: 2007-11-4 16:15

原帖由 0433351410 於 2007-11-4 02:14 發表

 登錄/註冊後可看大圖

Where is it ar? Look so Good wo

石墺

[ 本帖最後由 kaho0338 於 2007-11-4 16:18 編輯 ]

作者: kaho0338 時間: 2007-11-6 03:18
new body from axial....
it look really nice

作者: fyin 時間: 2007-11-7 11:05
Hi Bros,
我同個fan都準備各訂一部番黎玩爬爬.
到時可否相約一齊玩?

作者: kaho0338 時間: 2007-11-7 15:31

原帖由 fyin 於 2007-11-7 11:05 發表

 登錄/註冊後可看大圖

Hi Bros,
我同個fan都準備各訂一部番黎玩爬爬.
到時可否相約一齊玩?

of cause brother....

we are waiting you to join

作者: edison 時間: 2007-11-7 18:52

原帖由 fyin 於 2007-11-7 11:05 發表

 登錄/註冊後可看大圖

Hi Bros,
我同個fan都準備各訂一部番黎玩爬爬.
到時可否相約一齊玩?

KWS have stock!

作者: kaho0338 時間: 2007-11-7 19:03

原帖由 edison 於 2007-11-7 18:52 發表

 登錄/註冊後可看大圖

KWS have stock!

邊間又返貨呀?

作者: edison 時間: 2007-11-8 00:11

原帖由 kaho0338 於 2007-11-7 19:03 發表

 登錄/註冊後可看大圖

邊間又返貨呀?

Red star have 2boxs ar!!

just HKD1900, is much cheap then me la!
I buy this kit form US, total need HK2200!!

作者: kaho0338 時間: 2007-11-9 00:42
今日見rcmodel 重有幾部ax10.........店員話sell 左幾部, 唔知邊個買左呢

作者: simontam 時間: 2007-11-9 11:33
me, over 10 hour

80% finish...........

作者: kaho0338 時間: 2007-11-9 14:09

原帖由 edison 於 2007-11-8 00:11 發表

 登錄/註冊後可看大圖

Red star have 2boxs ar!!
just HKD1900, is much cheap then me la!
I buy this kit form US, total need HK2200!!

你早人成2個月.....乜都抵la....
個2個月等到我

作者: kaho0338 時間: 2007-11-9 14:11

原帖由 simontam 於 2007-11-9 11:33 發表

 登錄/註冊後可看大圖

me, over 10 hour
80% finish...........

keep posting photo and share with us

nice

作者: fyin 時間: 2007-11-9 23:27
標題: My new AX10 Scorpion
Hi All Bros,
Just bought it tonight at KWS- HS.
Hope to know what brand how much of motor & ESC used on your crawler?
And the servo need more torque? ??Kg/cm
Thanks for all.

作者: kaho0338 時間: 2007-11-9 23:38

原帖由 fyin 於 2007-11-9 23:27 發表

 登錄/註冊後可看大圖

Hi All Bros,
Just bought it tonight at KWS- HS.
Hope to know what brand how much of motor & ESC used on your crawler?
And the servo need more torque? ??Kg/cm
Thanks for all.

may i know how much u bought at HS ?
i use mc330 with 3A BEC, Integy 50t moto, towerpro mg995 servo(using mg995 servo, u must add BEC on your esc, or u must have 2a bec on your esc)

作者: fyin 時間: 2007-11-10 00:40
Hi Bro,
What's the function to use separate BEC.to the ESC?
Is the main batt connect to ESC and receiver to control 2 servos.
the reciever with BEC inside, or built-it BEC's current not enough?
Thanks Bro.

作者: fyin 時間: 2007-11-10 00:41
HS 1980
CAT 2000

作者: kaho0338 時間: 2007-11-10 01:32

原帖由 fyin 於 2007-11-10 00:40 發表

 登錄/註冊後可看大圖

Hi Bro,
What's the function to use separate BEC.to the ESC?
Is the main batt connect to ESC and receiver to control 2 servos.
the reciever with BEC inside, or built-it BEC's current not enough?
T ...

most ESC "built-in BEC's current not enough" so it need a bigger "A" BEC to give more power to servo, otherwise, the servo will stop while you turn left, right. or burn your esc.

check this out

登錄/註冊後可看大圖

http://bbs.rc-evo.com/viewthread.php?tid=61037&extra=page%3D1

作者: fyin 時間: 2007-11-10 10:02
Hi Bro,
Thanks your advise, will get one for my AX10.

作者: Ang 時間: 2007-11-10 11:51

原帖由 kaho0338 於 2007-11-9 23:38 發表

 登錄/註冊後可看大圖

Towerpro mg995 servo(using mg995 servo, u must add BEC on your esc, or u must have 2a bec on your esc)

Where did you buy the MG995? Is this servo good enough for AX10 crawler application for it's price?

Please advise.

作者: kaho0338 時間: 2007-11-10 12:00

原帖由 Ang 於 2007-11-10 11:51 發表

 登錄/註冊後可看大圖

Where did you buy the MG995? Is this servo good enough for AX10 crawler application for it's price?

Please advise.

sure, i bought at here from other brothers, the price is $70

very good on ax10

作者: edison 時間: 2007-11-10 12:15

原帖由 fyin 於 2007-11-10 10:02 發表

 登錄/註冊後可看大圖

Hi Bro,
Thanks your advise, will get one for my AX10.

it depend on on what ESC you using!
I know some ESC can output 6V, 5A BEC power.

Novak ROOSTER CRAWLER-EDITION

ROOSTER CRAWLER-EDITION FEATURES
2 specifically designed crawling driving profiles which feature Zero Reverse Delay, and high-powered Drag Brakes (or “Hill” or “Hold” brakes)
Built-in Li-Poly Cutoff Protection (Profile 2)
Water-Resistant Case
Heavy-Duty 6 Volt / 5 Amp BEC
Direct-Solder Wiring Tabs
User Replaceable Input Harness
Novak’s One-Touch Set-Up™
Built-in Power Output for Optional 6V Accessory Fan (#5648)
Novak’s Radio-Priority Circuitry™

Novak’s Polar Drive Circuitry™
Thermal Overload Protection
Designed and Assembled by Novak in the USA using globally sourced components

ROOSTER CRAWLER-EDITION SPECIFICATIONS
Forward/Reverse:  Forward and Reverse
Input Voltage:  4-7 Ni-Cd/Ni-MH cells (1.2V/cell) or 2 Li-Poly cells
Footprint:  1.54" x 1.18" (39 x 30 mm)
Weight:  2.66 oz. (75.5 g) w/wires; 1.57 oz. (44.5 g) w/o wires
Motor Limit:  12-turn brushed (at 6 cells Ni-MH)
On-Resistance:  0.0014 ohms (forward); 0.0028 ohms (reverse)*
Rated Current:  400 amps* (forward)

Braking Current:  200 amps*
BEC:  6.0 volt/5.0 amp
Motor Limit 27-turn brushed (at 6 cells Ni-MH)

Discrete Steps:  256 Forward; 256 Reverse
Battery Plug:  Tamiya
Motor Plug Bullet connectors
Drive Profiles: 2
Status LEDs: 2
Voltage Cut-off: 6.25 volts (Li-Poly Profiles)

作者: kaho0338 時間: 2007-11-10 17:35

原帖由 edison 於 2007-11-10 12:15 發表

 登錄/註冊後可看大圖

it depend on on what ESC you using!
I know some ESC can output 6V, 5A BEC power.

Novak ROOSTER CRAWLER-EDITION

ROOSTER CRAWLER-EDITION FEATURES
2 specifically designed crawling dri ...

好貴

不如買你隻brushless 好過

作者: fyin 時間: 2007-11-11 00:22
Hi Bro edison,
Thanks your info.

I will use Hitec servo 645MG or 5945MG.

作者: fyin 時間: 2007-11-12 14:19
Just check the Novak Crawling edition price around US$89.99.

作者: kaho0338 時間: 2007-11-13 01:15

原帖由 fyin 於 2007-11-12 14:19 發表

 登錄/註冊後可看大圖

Just check the Novak Crawling edition price around US$89.99.

which esc planning to use now ?

作者: minimini 時間: 2007-11-13 02:04

原帖由 kaho0338 於 2007-11-10 01:32 發表

 登錄/註冊後可看大圖

most ESC "built-in BEC's current not enough" so it need a bigger "A" BEC to give more power to servo, otherwise, the servo will stop while you turn left, right. or burn your esc.

check this out ...

does any bro know whether this extra BEC can be used in brushless Esc ??......... many thx !!

作者: kaho0338 時間: 2007-11-13 02:09

原帖由 minimini 於 2007-11-13 02:04 發表

 登錄/註冊後可看大圖

does any bro know whether this extra BEC can be used in brushless Esc ??......... many thx !!

this is my BEC manual, u can have a look.....hope it can help
http://www.hobbywing.com/upload/UBEC_new.pdf
http://www.hobbywing.com/product_show.asp?ID=75

anyway, u got ax10 too ?

[ 本帖最後由 kaho0338 於 2007-11-13 02:10 編輯 ]

作者: minimini 時間: 2007-11-13 02:12

原帖由 kaho0338 於 2007-11-13 02:09 發表

 登錄/註冊後可看大圖

this is my BEC manual, u can have a look.....hope it can help
http://www.hobbywing.com/upload/UBEC_new.pdf
http://www.hobbywing.com/product_show.asp?ID=75

anyway, u got ax10 too ?

Thx bro kaho........

I got the TLT only (with Tobee extension pack)........

作者: kaho0338 時間: 2007-11-13 02:13

原帖由 minimini 於 2007-11-13 02:12 發表

 登錄/註冊後可看大圖

Thx bro kaho........

I got the TLT only (with Tobee extension pack)........

o...it can use on brushless esc

i checked the manual

but better ask ask b4 u buy

[ 本帖最後由 kaho0338 於 2007-11-13 02:18 編輯 ]

作者: fyin 時間: 2007-11-13 12:36

原帖由 kaho0338 於 2007-11-13 01:15 發表

 登錄/註冊後可看大圖

which esc planning to use now ?

Hi Bro,
Planning to buy Rooster - crawler edition set w/ 55T novak motor.
around US$110.-/set, its has 6V 5A BEC and w/ built-in Li-po voltage cut system, brake system.

作者: edison 時間: 2007-11-13 12:51
Good choose!

作者: kaho0338 時間: 2007-11-13 12:51

原帖由 fyin 於 2007-11-13 12:36 發表

 登錄/註冊後可看大圖

Hi Bro,
Planning to buy Rooster - crawler edition set w/ 55T novak motor.
around US$110.-/set, its has 6V 5A BEC and w/ built-in Li-po voltage cut system, brake system.

less than 1k @@ ... the price is nice boo

作者: minimini 時間: 2007-11-13 18:27

原帖由 fyin 於 2007-11-13 12:36 發表

 登錄/註冊後可看大圖

Hi Bro,
Planning to buy Rooster - crawler edition set w/ 55T novak motor.
around US$110.-/set, its has 6V 5A BEC and w/ built-in Li-po voltage cut system, brake system.

this Esc is available in HK ??........or need to buy from on-line shop ??........ Thx !!

作者: Timothypychan 時間: 2007-11-13 19:23

原帖由 minimini 於 2007-11-13 18:27 發表

 登錄/註冊後可看大圖

this Esc is available in HK ??........or need to buy from on-line shop ??........ Thx !!

No. you need order from Tower Hobby of The Crawler Store.

作者: fyin 時間: 2007-11-14 00:18

原帖由 minimini 於 2007-11-13 18:27 發表

 登錄/註冊後可看大圖

this Esc is available in HK ??........or need to buy from on-line shop ??........ Thx !!

Hi Bro Minimini,
Novak has a agent in HK. I will try to order
one set via KWS model shop. This ESC with 55T motor is new product for crawler.
Novak Hong Kong agent is Univeral Model Co.,

作者: kaho0338 時間: 2007-11-14 00:23

原帖由 fyin 於 2007-11-14 00:18 發表

 登錄/註冊後可看大圖

Hi Bro Minimini,
Novak has a agent in HK. I will try to order
one set via KWS model shop. This ESC with 55T motor is new product for crawler.
Novak Hong Kong agent is Univeral Model Co.,

can u share the price with us, when u order this set ?
it is so attractive if under 1k

作者: Ang 時間: 2007-11-16 09:45

原帖由 kaho0338 於 2007-11-9 23:38 發表

 登錄/註冊後可看大圖

using mg995 servo, u must add BEC on your esc, or u must have 2a bec on your esc

How about Tak Po's ESC like TP-M8R? Anyone know the BEC spec on this local ESC?

作者: kaho0338 時間: 2007-11-16 12:32

原帖由 Ang 於 2007-11-16 09:45 發表

 登錄/註冊後可看大圖

How about Tak Po's ESC like TP-M8R? Anyone know the BEC spec on this local ESC?

those esc should be only 1A .... only fews model esc for off road got 2a (most are novak)

[ 本帖最後由 kaho0338 於 2007-11-16 14:04 編輯 ]

作者: kaho0338 時間: 2007-11-16 16:13
暫時, 新setting....

作者: simontam 時間: 2007-11-16 20:13
Thank you Bro Edison

99% finish

作者: kaho0338 時間: 2007-11-16 20:35

原帖由 simontam 於 2007-11-16 20:13 發表

 登錄/註冊後可看大圖

Thank you Bro Edison
99% finish

can u share what have u mod no it ? it looks nice

作者: fyin 時間: 2007-11-16 21:17
Hi Bro Kaho,
How much the Topcad 4 green metal shock in your crawler?
Is it better than existing plastic one? And did you replace shock spring, what color you change to? the existing is blue color one.
Thanks.

作者: kaho0338 時間: 2007-11-16 21:27

原帖由 fyin 於 2007-11-16 21:17 發表

 登錄/註冊後可看大圖

Hi Bro Kaho,
How much the Topcad 4 green metal shock in your crawler?
Is it better than existing plastic one? And did you replace shock spring, what color you change to? the existing is blue color o ...

i bought at $350 ( i think the price is expensive, b4 i ask about $300 only )
i don't think better than plastic one, because after i change it, my ax10 can not climb well as before,
the topcad shock only provide two different spring (very soft and hard), but i want medium.
when i use soft one, the car can not return to normal position(horizontal), when i use the hard spring the car can not climb well, because it is too hard (compare to the ax10 stock damper).....

also, this damper is very hard to find spring, because topcad didn't provide any option for this spring.....

[ 本帖最後由 kaho0338 於 2007-11-16 21:37 編輯 ]

作者: kaho0338 時間: 2007-11-16 21:33
if u can find ..... i think this one can be much better
integy Heavy-Duty MSR8 Shock
http://www.integy.com/cgi-bin/we ... O8eH-25107267290.a7

登錄/註冊後可看大圖

作者: fyin 時間: 2007-11-17 11:20
So many thanks bro.

作者: simontam 時間: 2007-11-17 12:09
Hi kaho, Wheely king shock is ok, you can think think
http://www.hpiracing.com/options/en/10830.html

作者: kaho0338 時間: 2007-11-18 01:53

原帖由 simontam 於 2007-11-17 12:09 發表

 登錄/註冊後可看大圖

Hi kaho, Wheely king shock is ok, you can think think
http://www.hpiracing.com/options/en/10830.html

it looks good.....

but, i will try to mod the topcad damper, otherwise, it just waste my new damper.

作者: kaho0338 時間: 2007-11-18 20:59
聽左edison兄意見, 再一次fine tune.... 比之前重心更底, 爬既角度更大, 如果油壓心再長多d, 爬既角度再加大

[ 本帖最後由 kaho0338 於 2007-12-5 01:29 編輯 ]

作者: edison 時間: 2007-11-18 21:07
You seen ready to crawler !!!!!!!!!!!!!!!!!!!!!!!

作者: kaho0338 時間: 2007-11-18 21:35

原帖由 edison 於 2007-11-18 21:07 發表

 登錄/註冊後可看大圖

You seen ready to crawler !!!!!!!!!!!!!!!!!!!!!!!

我見rccrawler d 人....90 degree...後輪重貼地

作者: edison 時間: 2007-11-18 22:01
share some photos here!!!!!

作者: 馬田 時間: 2007-11-18 22:23

原帖由 kaho0338 於 2007-11-18 21:35 發表

 登錄/註冊後可看大圖

我見rccrawler d 人....90 degree...後輪重貼地

其實用不著90度咁多的

扭得太多有時會仲易反車

作者: kaho0338 時間: 2007-11-18 22:29

原帖由 edison 於 2007-11-18 22:01 發表

 登錄/註冊後可看大圖

share some photos here!!!!!

登錄/註冊後可看大圖

作者: kaho0338 時間: 2007-11-18 22:29

原帖由馬田於 2007-11-18 22:23 發表

 登錄/註冊後可看大圖

其實用不著90度咁多的

扭得太多有時會仲易反車

yes...u are right.
我e+ 都反車

作者: 屎太濃 時間: 2007-11-18 22:53
樓主,你影d相同我d畫都幾似,哈哈哈...

[ 本帖最後由屎太濃於 2007-11-18 22:59 編輯 ]

作者: edison 時間: 2007-11-18 22:57
wah, nice painting!

作者: 屎太濃 時間: 2007-11-18 23:04
你地d車好型呀,
我平時都只係睇你地講車,
而自己又唔識又冇車,所以都係得個睇字.

作者: kaho0338 時間: 2007-11-18 23:06

原帖由 屎太濃 於 2007-11-18 22:53 發表

 登錄/註冊後可看大圖

樓主,你影d相同我d畫都幾似,哈哈哈...

nice drawing !

你都有畫畫? 我都有boo......post 多d你d大作吧.....

作者: kaho0338 時間: 2007-11-29 03:30
anyone want to join crawler party at 16,Dec Shek O ... ?

作者: edison 時間: 2007-11-29 10:16

原帖由 kaho0338 於 2007-11-29 03:30 發表

 登錄/註冊後可看大圖

anyone want to join crawler party at 16,Dec Shek O ... ?

I Join!

作者: fyin 時間: 2007-11-29 18:21
Hi Bro,
Not finish yet!

作者: kaho0338 時間: 2007-12-5 00:08
i have new idea on fixing ax10 drive shaft failure, it is much simply and better than axial new option design and it is cheaper (only $20hkd to fix all shaft) !
here is the photo, any one interesting to know ?

axial new new new new release option:

登錄/註冊後可看大圖

mine new idea:

作者: kaho0338 時間: 2007-12-5 01:35
preparing for 16-dec crawler party .....

[ 本帖最後由 kaho0338 於 2007-12-5 03:37 編輯 ]

作者: edison 時間: 2007-12-5 09:39
Wow!
Good Idea!!!

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)