另外想問問Xpress好唔好?...
幾$$$?...
thx a lot作者: 3pk_supra 時間: 2007-11-1 21:06
11.5係咪好d呀?.?作者: kaho0338 時間: 2007-11-1 21:09
11.5 t 會好好多...
5.5 一撞就say goodbye作者: Administrator 時間: 2007-11-1 21:10
If you fear that much about total carnage, then you shouldn't use it!!!
Well, The guys in RC Car actions (A Yankee RC Car magazine) had done it few months back. Putting a 5 turn Brushless in the M03. and manage to get close to 94km/h. so there you go......
but for a M car to put brushless engine. many of the people who driven one before complain about the stiffness of the car at the front, and the tail is a bit loose. also excessive understeering of the car itself. so if you want to try it. make sure you have that in mind........作者: 長崎良尾 時間: 2007-11-1 21:39
m03用.....唔好玩死硬作者: 毒魚 時間: 2007-11-1 22:01
乜車用高速撞乜都死= w =zzzz作者: Brushless 時間: 2007-11-1 22:18
哦,你怕第二日唔玩M仔,咁個快無刷都可以放落其它touring到呢
想玩BRUSHLESS,玩呢個EXIGE啦!13.5,已經極限!作者: minimini 時間: 2007-11-20 00:02
5.5R in a M03..........die-hard.......作者: Buildinglung 時間: 2007-11-24 04:22
5.5R ???? So fast for M03 la.... not the problem of running performace, is the plastic classic not strong enough for so high speed........... the gear box will..........HAHAHA!!!! and have you consider about the gear ratio???? what gear ratio you willing to use???? an not correct gear ratio will cause over heat or damage of the brushless.....作者: jas 時間: 2007-11-24 12:53
How about for ABC or Atlas 4WD Mini chassis?
Brushless okay ma? 10.5R or 13.5R nei?作者: WallaceNg 時間: 2007-11-24 16:58
m車用brushless,一定cup車作者: dream_hksi 時間: 2007-11-25 18:14
最後用左9.5r,,
8.5 gear ratio,,
都係真係太快..
轉灣勉強ok,,
個ball diff玩左一次已經散左..作者: cyken2512 時間: 2007-12-2 10:22
恭喜~~恭喜~~~M03R装无刷5.5R..我捻都无捻过~~作者: ellis 時間: 2007-12-2 15:44
可以出過架用碳板既m車喇作者: mk9001 時間: 2007-12-25 16:55
5.5R實行快死(車)...... :funk: