[ 本帖最後由 Ken 於 2007-11-23 14:47 編輯 ]作者: Brushless 時間: 2007-11-23 13:46
a lot of reasons bor, can be transmitter error, signal jammimg/interference, receiver problem, steering servo error, wrong car setting, mechanical failure of your car (eg.broken CVD), tires problem...................
but it seems you are having a problem with your servo or servo saver or loosening screw somewhere in the steering linkage.作者: samkube520 時間: 2007-11-23 13:55
我都係唔係幾明
因為我剛開始接觸
所以請大哥可以清楚一點告訴我嗎作者: ming0916 時間: 2007-11-23 14:21
你在家試定街試?
天線有無放出車外??
在家試可能係家中的電器干擾架作者: samkube520 時間: 2007-11-23 14:30
但係我未按油門前胎已經向左
只要一開遙控就向左了/____\作者: WallaceNg 時間: 2007-11-23 14:34
你係咪上servo過時冇比佢去返個中位呀？
你要未上servo之前開一開控同車等佢自己轉番過去先上servo saver
[ 本帖最後由 WallaceNg 於 2007-11-23 14:36 編輯 ]作者: Administrator 時間: 2007-11-23 14:35
wheel mis-alignment. For the TT01, get the adjustable steering arm to fix this.
Also, might be best to read some of the archive sections (With regard to the TT01 upgrade). then you will understand more stuff.作者: ming0916 時間: 2007-11-23 14:35
有無插錯個接收呀??
你試下電變同servo果2個掉轉插
不過記得lon起架車先作者: samkube520 時間: 2007-11-23 14:36
我以家靜態既時候係中位的作者: ming0916 時間: 2007-11-23 14:38
