RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: TA05用9T摩打 [打印本頁]

作者: sun7777 時間: 2007-12-7 00:20
標題: TA05用9T摩打

用KEYENCE A-07VZ
9T摩打
原裝車

師兄禁SETING會唔會有問題???
THZ

作者: 阿門 時間: 2007-12-7 00:23
TA05原裝,.9T..

我諗會頂唔順.= ="

作者: 3pk_supra 時間: 2007-12-7 00:25

原帖由 sun7777 於 2007-12-7 00:20 發表

 登錄/註冊後可看大圖

用KEYENCE A-07VZ
9T摩打
原裝車
師兄禁SETING會唔會有問題???
THZ

我諗要改齒比同cooling最緊要

作者: AMAT 時間: 2007-12-7 00:26
架車好快就會變型.

作者: 阿門 時間: 2007-12-7 00:27

原帖由 AMAT 於 2007-12-7 12:26 AM 發表

 登錄/註冊後可看大圖

架車好快就會變型.

改碳底,,,,

作者: AMAT 時間: 2007-12-7 00:29

原帖由阿門於 2007-12-7 00:27 發表

 登錄/註冊後可看大圖

改碳底,,,,

再一撞就車架都啪斷

作者: 阿門 時間: 2007-12-7 00:30

原帖由 AMAT 於 2007-12-7 12:29 AM 發表

 登錄/註冊後可看大圖

再一撞就車架都啪斷

再買.!!!!

...[有錢人玩意]

作者: sun7777 時間: 2007-12-7 00:31
如果改前後金屬波相會唔會好D???
THZ各位師兄

作者: AMAT 時間: 2007-12-7 00:32

原帖由阿門於 2007-12-7 00:30 發表

 登錄/註冊後可看大圖

再買.!!!! ...[有錢人玩意]

的確有米!

不過佢用前後波電變.....應該好快隻摩打會打柴........

作者: 阿門 時間: 2007-12-7 00:32

原帖由 sun7777 於 2007-12-7 12:31 AM 發表

 登錄/註冊後可看大圖

如果改前後金屬波相會唔會好D???
THZ各位師兄

你用黎玩dirft?

作者: AMAT 時間: 2007-12-7 00:33

原帖由 sun7777 於 2007-12-7 00:31 發表

 登錄/註冊後可看大圖

如果改前後金屬波相會唔會好D???
THZ各位師兄

真有米!前後波箱價值三百幾蚊一套~儲齊前後要六百幾~

作者: 阿門 時間: 2007-12-7 00:33

原帖由 AMAT 於 2007-12-7 12:32 AM 發表

 登錄/註冊後可看大圖

的確有米!

不過佢用前後波電變.....應該好快隻摩打會打柴........

分分鐘電變都死 --

作者: sun7777 時間: 2007-12-7 00:33
用黎玩快車

作者: 阿門 時間: 2007-12-7 00:34

原帖由 AMAT 於 2007-12-7 12:33 AM 發表

 登錄/註冊後可看大圖

真有米!前後波箱價值三百幾蚊一套~儲齊前後要六百幾~

可以買多架ta05喇.

作者: AMAT 時間: 2007-12-7 00:35

原帖由阿門於 2007-12-7 00:33 發表

 登錄/註冊後可看大圖

分分鐘電變都死 --

問題只係睇電變死先定係摩打死先......

作者: james891031 時間: 2007-12-7 00:35
TA05大改真係

我以前用3RACING GRAPHITE KIT
+ 前後金屬波箱
用埋3.5R
玩得多同埋成日撞都未爆
不過塊底板好似隻船咁

中間墮左,頭尾撓起

作者: AMAT 時間: 2007-12-7 00:35

原帖由阿門於 2007-12-7 00:34 發表

 登錄/註冊後可看大圖

可以買多架ta05喇.

YEAH~

作者: AMAT 時間: 2007-12-7 00:35

原帖由 james891031 於 2007-12-7 00:35 發表

 登錄/註冊後可看大圖

TA05大改真係
我以前用3RACING GRAPHITE KIT
+ 前後金屬波箱
用埋3.5R
玩得多同埋成日撞都未爆
不過塊底板好似隻船咁
中間墮左,頭尾撓起

好正常,扭得太勁

作者: 阿門 時間: 2007-12-7 00:36

原帖由 james891031 於 2007-12-7 12:35 AM 發表

 登錄/註冊後可看大圖

TA05大改真係
我以前用3RACING GRAPHITE KIT
+ 前後金屬波箱
用埋3.5R
玩得多同埋成日撞都未爆
不過塊底板好似隻船咁
中間墮左,頭尾撓起

鐵達黎- -..

作者: sun7777 時間: 2007-12-7 00:36
其實我唔知前後波箱個樣係點...

快車好玩好多!!!

作者: AMAT 時間: 2007-12-7 00:38

原帖由 sun7777 於 2007-12-7 00:36 發表

 登錄/註冊後可看大圖

其實我唔知前後波箱個樣係點...
快車好玩好多!!!

好玩~
仲好快就要換O野添~

作者: sun7777 時間: 2007-12-7 00:39
師兄.......有冇D前後波箱D相俾我睇下.......

作者: 毒魚 時間: 2007-12-7 01:37
以前玩10turn都係咁玩,現在ta-05都不是這樣差吧,有什麼問題啊= =?

我tb-02用10turn甩尾又係平安無事,上2星期在臨華街的人都看到吧?而且有樣十分糟糕的東西沒set都可以甩的正正常常.....

tt-01這樣膠只是特別例子而已,當然用快摩打最受難當然是傳動的部件,不打理了解自己架車多多錢都沒用

作者: efour 時間: 2007-12-7 01:51
what is the problem of using TA05 to run a 9T motor ??? My friend is running 7x1 motor
( original plastic bathhub chassis ) His car is running well worr..... no problem at all worr.........
As long as the motor block assemble is metal or aluminium and correct gear ratio . I don't see it has problem. All is about controlling.

But if you can't control the car well, I think a white pig on X-ray car will not survive for long time............

[ 本帖最後由 efour 於 2007-12-7 01:53 編輯 ]

作者: GigaRacer 時間: 2007-12-7 02:09
Even you don't see a problem right now, you can't really control the car. I bet you are just "fly street" without any track layout.

Speed is not everything.

作者: efour 時間: 2007-12-7 02:19
You mean 7x1T in TA05, fly street ??? Nope, we're playing in a track called PYC. His car's speed and performance is not bad..................... and he use this combination racing in YMC, he can get into group A worr........

Of course running a low turn motor on a inter-med class car need more maintainance. But it does't mean it's not run-able. I also own some out dated high end car like PRO4, 415. These car also need a lot of maintainance running 4.5R / 5 cells.

If you think that only high end car can handle low turn motor, I think this is not 100% correct ???

作者: sun7777 時間: 2007-12-7 09:16
THX 各位師兄

作者: AMAT 時間: 2007-12-7 09:52

原帖由 efour 於 2007-12-7 02:19 發表

 登錄/註冊後可看大圖

You mean 7x1T in TA05, fly street ??? Nope, we're playing in a track called PYC. His car's speed and performance is not bad..................... and he use this combination racing in YMC, he can get i ...

用7T係TA05到短時間梗係好似冇問題.....但不出十零排電後,你放架車係一個平面上面,你會發現你個車兜係成個拗咗.
之後你架車就會成日奇奇怪怪成日偏埋一邊,點SET都係會偏.

可以唔好信,話晒個兜都係八草一個,扭咗咪買過個囉.

作者: efour 時間: 2007-12-7 13:10
I know the chassis will twisted, but are u 100% sure that all high end car don't twist at all........... at least I know PRO4 and 415 do twisted after big crash................

We're talking about about driving not crashing............. as I've said before, if you crashing a lot, no matter which car / motor you using........... will die very soon

作者: terence0103 時間: 2007-12-7 13:13

原帖由 efour 於 2007/12/7 13:10 發表

 登錄/註冊後可看大圖

I know the chassis will twisted, but are u 100% sure that all high end car don't twist at all........... at least I know PRO4 and 415 do twisted after big crash................

We're talking about ...

hes not tlaking about crushing..
he said if u played about 10 pack of battery ur chassis will twisted too,
not crashing...

作者: chc288 時間: 2007-12-7 14:45
膠車架點都係差少少 , 要用怏摩打都係換個個底版好啲

就好似真車咁 , 架civic 整個幾百匹既engine落去都要強化個車架同週邊野啦 , 唔係既話架車一樣好易玩完

[ 本帖最後由 chc288 於 2007-12-7 14:48 編輯 ]

作者: sun7777 時間: 2007-12-7 15:56
唔該哂..........又學到野

作者: AMAT 時間: 2007-12-7 16:44

原帖由 terence0103 於 2007-12-7 13:13 發表

 登錄/註冊後可看大圖

hes not tlaking about crushing..
he said if u played about 10 pack of battery ur chassis will twisted too,
not crashing...

415果O的,扭極都仲有二樓架撐下,同埋你仲可以鬆返螺絲SET返佢.....TA05就係SET都冇用,扭咗就扭咗.

作者: Rcrounder 時間: 2007-12-9 00:43
Can add 二樓架 to TA05. No problem to run with a 6T motor. Just more difficult to control than a high end car.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)