RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Axial AX10 升級工程進行中.... [打印本頁]

作者: kaho0338 時間: 2007-12-11 14:28
標題: Axial AX10 升級工程進行中....
今日12:00 收到郵差送來Junfac 既option part, 7号order, 11号收到.....快到

今次升級如下:
junfac 2.2 wheel widener
2.2 Mudrock challenger Beadlock wheels (Black)

[ 本帖最後由 kaho0338 於 2007-12-11 14:29 編輯 ]

作者: kaho0338 時間: 2007-12-11 14:29
末來升級如下:

Losi rock claws 軚

登錄/註冊後可看大圖

AX10 Scorpion Rear Steer Kit

登錄/註冊後可看大圖

Axial Bent Links Kit

登錄/註冊後可看大圖

[ 本帖最後由 kaho0338 於 2007-12-11 14:39 編輯 ]

作者: kaho0338 時間: 2007-12-11 15:37

原帖由 sn-10 於 2007-12-11 15:27 發表

 登錄/註冊後可看大圖

嘩...咁快?! 上次我套要7個working days; 岩岩訂果d野, 4號order今日先到....

可能佢一次過寄HK 會平d... 所比佢地會儲幾個同一地方order 先寄
我重要係7號夜一夜先order.... 今日早上就收到

good services

[ 本帖最後由 kaho0338 於 2007-12-11 15:40 編輯 ]

作者: NICI 時間: 2007-12-11 17:21
Hi 師兄
我想問你在韓國junfac訂零件,郵費 chages多少?通常junfac綱上的是美金價,但是否乘7.8對港幣?
Regards!

作者: kaho0338 時間: 2007-12-11 18:03

原帖由 NICI 於 2007-12-11 17:21 發表

 登錄/註冊後可看大圖

Hi 師兄
我想問你在韓國junfac訂零件,郵費 chages多少?通常junfac綱上的是美金價,但是否乘7.8對港幣?
Regards!

郵費較平$80hkd內, palpay 差不多要乘8

作者: NICI 時間: 2007-12-11 22:09
Thanks! C hing

作者: 0433351410 時間: 2007-12-11 22:32
Hi C Hing i also have a account in JunFac they ask me the (Post Code) but in Hong Kong we don't have post code what can i type ar?
Thanks

作者: kaho0338 時間: 2007-12-11 22:37
+852 .........

作者: fyin 時間: 2007-12-11 23:19

原帖由 0433351410 於 2007-12-11 22:32 發表

 登錄/註冊後可看大圖

Hi C Hing i also have a account in JunFac they ask me the (Post Code) but in Hong Kong we don't have post code what can i type ar?
Thanks

HONG KONG Post Code - HKG

作者: fyin 時間: 2007-12-11 23:21
Hi Bro Kaho,
Can you tell me about your model shop to order the parts?
I hope to try to order some parts.
Thanks a lot!

作者: rockdragon 時間: 2007-12-11 23:23

原帖由 0433351410 於 2007-12-11 22:32 發表

 登錄/註冊後可看大圖

Hi C Hing i also have a account in JunFac they ask me the (Post Code) but in Hong Kong we don't have post code what can i type ar?
Thanks

I was asked many many time for the postcode of HongKong, too. So I always put the postcode as "0000" and everything is OK everytime.

作者: minimini 時間: 2007-12-11 23:27
woooo..........the wheels are sooooooo beautiful !!...........

作者: kaho0338 時間: 2007-12-12 00:07

原帖由 fyin 於 2007-12-11 23:21 發表

 登錄/註冊後可看大圖

Hi Bro Kaho,
Can you tell me about your model shop to order the parts?
I hope to try to order some parts.
Thanks a lot!

i just order from junfac - my first time

other parts i only buy at kws... some parts are 1:10 touring

作者: 0433351410 時間: 2007-12-12 00:13
Thank you very much all C Hing

作者: kaho0338 時間: 2007-12-12 00:33
got a message, my losi tire will come next week

let's rock

but not roll !

又要買鉛

[ 本帖最後由 kaho0338 於 2007-12-12 00:35 編輯 ]

作者: edison 時間: 2007-12-12 01:02
I'm very looking to see your car performance in this Sunday on "Shek O"

作者: kaho0338 時間: 2007-12-12 01:09

原帖由 edison 於 2007-12-12 01:02 發表

 登錄/註冊後可看大圖

I'm very looking to see your car performance in this Sunday on "Shek O"

i'm "very" want to go ...... but it really depends on my new job time table

btw, the tire come on this fri or next fri ? i wait so long...

and i want to buy Bender SW3 chassis too...

http://www.rccrawler.com/forum/showthread.php?t=87684
http://www.rccrawler.com/forum/showthread.php?t=95640

this chassis really can do ! they win the competition

Bender Customs SW3
http://youtube.com/watch?v=P5fW8NpfR_w

Bender Customs SW3
http://youtube.com/watch?v=STDB_OliiyI
http://youtube.com/watch?v=QJR0EzJXlLU

[ 本帖最後由 kaho0338 於 2007-12-12 01:30 編輯 ]

作者: kaho0338 時間: 2007-12-12 01:43
please notice :
this message is for people who got AX10 with their original wheel and planning to get the junfac 2.2 wheel wider.

"The junfac 2.2 wheel wider will destroy your original AX10 wheel, because the AX10 wheel hex hub is not strong enough, the plastic is too soft. The junfac wheel wider will totally destroy the plastic hex hub, so don't try it.

[ 本帖最後由 kaho0338 於 2007-12-12 01:52 編輯 ]

作者: kaho0338 時間: 2007-12-13 01:03
step two today :
add lead on the wheel ...

still wait for losi rock claw shipping

作者: fyin 時間: 2007-12-14 01:11
Hi Bro Kaho,
Just bought AX10 rear steer kit at KWS HS.$250.- AX30492
they have a lot of spare parts now. you can go and take a look what you want.
but some parts were expensive. eg. 30度side rod sell $120 / pr.

And how weight you add of each wheels on your car?
Thanks.

作者: kaho0338 時間: 2007-12-14 01:17

原帖由 fyin 於 2007-12-14 01:11 發表

 登錄/註冊後可看大圖

Hi Bro Kaho,
Just bought AX10 rear steer kit at KWS HS.$250.- AX30492
they have a lot of spare parts now. you can go and take a look what you want.
but some parts were expensive. eg. 30度side rod ...

Hi, can u pls PM me which shop have those parts ?
300g on front, 150g rear

[ 本帖最後由 kaho0338 於 2007-12-14 01:18 編輯 ]

作者: fyin 時間: 2007-12-14 10:33
Hi Bro,
Thanks

作者: 0433351410 時間: 2007-12-15 01:48
How can buy the Bender SW3 chassis ?
i saw the youtube video the ax 10 Bender SW3 chassis is better then my one so much ar

作者: kaho0338 時間: 2007-12-23 20:20

原帖由 0433351410 於 2007-12-15 01:48 發表

 登錄/註冊後可看大圖

How can buy the Bender SW3 chassis ?
i saw the youtube video the ax 10 Bender SW3 chassis is better then my one so much ar

online order only .....

作者: kaho0338 時間: 2007-12-23 20:23
option option and option

作者: 0433351410 時間: 2007-12-23 21:43

原帖由 kaho0338 於 2007-12-23 20:20 發表

 登錄/註冊後可看大圖

online order only .....

Can u tell me which wed site can order.
Thanks

作者: rockdragon 時間: 2007-12-23 22:21

原帖由 0433351410 於 2007-12-23 21:43 發表

 登錄/註冊後可看大圖

Can u tell me which wed site can order.
Thanks

Here you go ......

http://www.tcscrawlers.com/Chassis-Kits-p-2-c-103.html

http://www.rcpcrawlers.com/home.php?cat=6

But seem like it's out of stock everywhere. ..

作者: simontam 時間: 2007-12-24 03:42
標題: 回復 27# 的帖子
有新option出，毒吓你先

[ 本帖最後由 simontam 於 2007-12-24 03:44 編輯 ]

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)