RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Hilux 工程中 [打印本頁]

作者: sxe10    時間: 2007-12-17 10:27
標題: Hilux 工程中
作天開ball,諗住慢慢嘆!
作者: bigben    時間: 2007-12-17 10:57
what is the differece between Hilux and F-350 ? or they are the same thing?
作者: littlekid626    時間: 2007-12-17 11:02
標題: 回復 1# 的帖子
好誘人的車架阿!!!
開始想換金屬車件了
作者: 778    時間: 2007-12-17 12:09
唔通你砌緊出山豬
作者: EricRC    時間: 2007-12-17 12:12
原帖由 bigben 於 2007-12-17 10:57 發表
what is the differece between Hilux and F-350 ? or they are the same thing?


I think the only different thing is the body
作者: edison    時間: 2007-12-17 12:18
So nice of the chassis!
作者: combatfung    時間: 2007-12-17 12:43
Bro's ,How much is the chassis set coming to HK, can it make by some factory in HK ???
and suggest use with titanium screw is much good ah!
作者: aquazone    時間: 2007-12-17 12:52
標題: 回復 1# 的帖子
why the 3nd photo show f-350 word in  chassis,weather hilux as same as f-350 all part  expect  body shell?
作者: tiger1    時間: 2007-12-17 12:54
Very pretty lah. Come on get it done FAST!!!
作者: minimini    時間: 2007-12-17 14:14
wa..........Junfac........... ...........rich man........
作者: sxe10    時間: 2007-12-17 14:36
原帖由 combatfung 於 2007-12-17 12:43 發表
Bro's ,How much is the chassis set coming to HK, can it make by some factory in HK ???
and suggest use with titanium screw is much good ah!

the junfac chassis cost us$179. the shipping i don't know bcos i bought many thing together.
inside 4 mount is hot racing hk$340.
作者: 9841    時間: 2007-12-17 23:30
奇怪喔!へ樓主出post "Hilux 工程中"
但相中係F350 WOW?

唔通係TWINS
美國溝日本

[ 本帖最後由 9841 於 2007-12-17 23:32 編輯 ]
作者: combatfung    時間: 2007-12-21 18:25
the chassis of F350 and Hilux are the same , is just hte shell different  , i have F350 before and compare with my Hilux i own , i thin k is just the same , but bro's SXE10 the alu chassis is must pretty , i also want it , but it is expensive !
作者: edison    時間: 2007-12-21 22:35
Actually, F350 and Hilux  wheel base have a little bit difference,
F350 is 11 inch
Hilux is 11.5 inch
So I think the Junfac kit need some modify for fit Hilux.
作者: 9841    時間: 2007-12-21 23:37
原帖由 combatfung 於 2007-12-21 18:25 發表
the chassis of F350 and Hilux are the same , is just hte shell different  , i have F350 before and compare with my Hilux i own , i thin k is just the same , but bro's SXE10 the alu chassis is must pre ...

F350 和Hilux 底盤是相同, 是正義hte 殼不同, 我有F350 在和和我的Hilux 我 相比擁有之前, 我稀薄的k 是正義的同樣, 但bro 的SXE10 alu 底盤是當務之急相當, 我並且想要它, 但它是昂貴的!
作者: 9841    時間: 2007-12-21 23:38
原帖由 edison 於 2007-12-21 22:35 發表
Actually, F350 and Hilux  wheel base have a little bit difference,
F350 is 11 inch
Hilux is 11.5 inch
So I think the Junfac kit need some modify for fit Hilux.

實際上, F350 和Hilux 輪子基地稍微有區別, F350 是11
英寸Hilux 是11.5 英寸因此我認為Junfac 成套工具需要一些修改為適合的Hilux 。

你D英文掂WOW!~
作者: sxe10    時間: 2008-1-13 22:21
continous.................
作者: edison    時間: 2008-1-13 22:32
I see a alot of $$$$$$$$$
作者: minimini    時間: 2008-1-13 22:35
at least 5k I think.........
作者: edison    時間: 2008-1-13 22:50
I think is close to 11k
作者: edison    時間: 2008-1-13 22:53
原帖由 sxe10 於 2008-1-13 22:21 發表
continous.................


Hay sxe10,
Have you get you new tire yet?
作者: sxe10    時間: 2008-1-13 23:41
原帖由 edison 於 2008-1-13 22:53 發表


Hay sxe10,
Have you get you new tire yet?

NOT READY
作者: starion    時間: 2008-1-14 00:17
嘩好毒呀........
屋企隻"大貓"唔比買 ......




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2