RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 去吧！D90 兵團..!! [打印本頁]

作者: carmanae86 時間: 2007-12-17 23:28
標題: 去吧！D90 兵團..!!
去吧！D90 兵團..!!

小弟打算改裝每一架D90,

心目中有(香港警車、爆炸品處理車、英軍吉普車),

民用車有(開蓬、半開蓬、pickup)等.... , 我上網過 defender D90都有好多款, 製作

時要花多些時間在知料搜集方面.

不過,小弟得一個cc01車架,黎要儲多的錢先得呀....！

作者: haeconelson 時間: 2007-12-17 23:33
師兄,你的車隊好正呀, 請問架D90, 那處有得買呀,我都想買一架,thks

作者: marxkeung 時間: 2007-12-17 23:34
成隊軍隊咁!唔怪得出面冇晒貨啦!!!?

作者: rolex1601 時間: 2007-12-17 23:58
can sell one to me ? haha

作者: marxkeung 時間: 2007-12-17 23:59
我都想要!!!!!!

作者: AMAT 時間: 2007-12-18 00:01
嘩....咁多O架呀.......

作者: carmanae86 時間: 2007-12-18 00:02

原帖由 marxkeung 於 2007-12-17 23:34 發表

 登錄/註冊後可看大圖

成隊軍隊咁!唔怪得出面冇晒貨啦!!!?

marxkeung兄您誤會啦!

我吳係街買呀!

係朋友的倉底貨, 我先買幾架

, 如您有興趣我可以讓架比您,吳好

啦...! 街應該無得買.

作者: carmanae86 時間: 2007-12-18 00:05

原帖由 haeconelson 於 2007-12-17 23:33 發表

 登錄/註冊後可看大圖

師兄,你的車隊好正呀, 請問架D90, 那處有得買呀,我都想買一架,thks

Haeconelson兄, 您對 Defender D90 有興趣,.. 請 pm 我啦.

作者: carmanae86 時間: 2007-12-18 00:09

原帖由 rolex1601 於 2007-12-17 23:58 發表

 登錄/註冊後可看大圖

can sell one to me ? haha

rolex1601兄睇您個頭像,就知您係知音人啦, 有興趣 pm 我啦, 不過要一齊玩喎....

作者: TJ~1 時間: 2007-12-18 00:20
JEEP 仔車迷

加夠10個字加夠10個字加夠10個字加夠10個字

作者: evolutionli 時間: 2007-12-18 03:43
我都想要架啊~~~sell to me?? thx~~~

作者: pantherjovi 時間: 2007-12-18 09:42
I wan't too....I want to take in my clamb car.....

作者: go2usie 時間: 2007-12-18 11:01
ching~~我有興趣, 可以讓架比我ma~ ??

作者: airyu 時間: 2007-12-18 11:10
could you sell one to me,, I from canada and I have been looking for that body shell for long .

ths

作者: matchbox 時間: 2007-12-18 15:14
我有興趣

, 可以讓架比我??

作者: Swift 時間: 2007-12-18 23:32
嘩....Carmen 兄......好利害喎 !

作者: chow169 時間: 2007-12-19 00:06
我有興趣可以讓架比我ma.....?

作者: carmanae86 時間: 2007-12-19 00:17

原帖由 chow169 於 2007-12-19 00:06 發表

 登錄/註冊後可看大圖

我有興趣可以讓架比我ma.....?

chow169, 我見您頭像有架Pajero, 當然可以啦, pm我啦
有無興趣一齊放車仔..

作者: rolex1601 時間: 2007-12-19 00:19
thank's carmanae86

作者: carmanae86 時間: 2007-12-19 00:24

原帖由 rolex1601 於 2007-12-19 00:19 發表

 登錄/註冊後可看大圖

thank's carmanae86

rolex1601兄

fit 唔 fit 到您架大脚八呢?
整好send D 相睇睇呀!

作者: serpent715 時間: 2007-12-19 02:04
我又要我想比我架劈庶佬用 PM pls!!

作者: mikewu 時間: 2007-12-19 08:57

原帖由 serpent715 於 2007-12-19 02:04 發表

 登錄/註冊後可看大圖

我又要我想比我架劈庶佬用 PM pls!!

Remember you need a longer wheel axle for the Defender body. It's not the same as Pajeros. Meaning that it's a Long wheel base (same as CRV, Red Bull VW) Pajeros/Jeeps/MUs use Short wheel base axle.................... KEEP THAT IN MIND!!!

作者: eddywon 時間: 2007-12-19 21:29
Yes, Mike,
I bought one from Bro Carman and found out the fact.

How can I find a long transmission shaft ar? or I cannot modify the shell for the pajero la.
thanks a lot.

作者: carmanae86 時間: 2007-12-19 22:48

原帖由 eddywon 於 2007-12-19 21:29 發表

 登錄/註冊後可看大圖

Yes, Mike,
I bought one from Bro Carman and found out the fact. How can I find a long transmission shaft ar? or I cannot modify the shell for the pajero la.
thanks a lot.

eddywon兄

只要向後改一個位(紅圓),就加長車身,不過條shaft要愌長D.(師兄

有錯請指出)

作者: Swift 時間: 2007-12-20 01:40
carman 兄正確 , 只要將車尾部份移後一格就可以 , 只需要換過條長shaft就可以 ! 非常簡單 !

作者: Swift 時間: 2007-12-20 01:44
呢款底盤可共用幾款車殼 , Tamiya值得一贊 !

作者: mikewu 時間: 2007-12-20 09:44

原帖由 eddywon 於 2007-12-19 21:29 發表

 登錄/註冊後可看大圖

Yes, Mike,
I bought one from Bro Carman and found out the fact. How can I find a long transmission shaft ar? or I cannot modify the shell for the pajero la.
thanks a lot.

Longer shafts can be found on ebay most of the time. As far as local suppliers, you need to do some searching lu.....

Good luck and DON'T WAIT! I have a feeling that they will run out of stock very soon as so many people bought the Defender body....

作者: eddywon 時間: 2007-12-20 12:42
標題: CC-01 modification
Hello Bro,

I have got another idea la : buy a brand new VW Touareg CC-01 and dispose of the ugly shell lor !!

Then my CC-01's (pajero +pajero + Isuzu Mu) can stay with shells on shelf la !!

8xx- then !!

作者: hihizaza 時間: 2007-12-20 19:02
我呢個CR-V長底咪啱哂位!!

可以讓個給我嗎??

作者: 毒魚 時間: 2007-12-20 19:07
我又要一架~~~~~~~~~

不過....如何不用殼柱穿住隻殼= w =?

作者: hoching 時間: 2007-12-20 19:15

原帖由毒魚於 2007-12-20 19:07 發表

 登錄/註冊後可看大圖

我又要一架~~~~~~~~~ 不過....如何不用殼柱穿住隻殼= w =?

鏍絲!!!!

作者: 毒魚 時間: 2007-12-20 19:17

原帖由 hoching 於 2007-12-20 19:15 發表

 登錄/註冊後可看大圖

鏍絲!!!!

好像十分不方便啦= w ="

作者: agentjerry 時間: 2007-12-20 21:08
標題: 回復 28# 的帖子
I think the VW Touareg CC-01 is quite beautiful------a powerful rally

作者: eddywon 時間: 2007-12-20 22:07
標題: fixing the shell
I thought I should try to use industrial magnets for the fixing of the hard shell..... If it works, will post to let bros know !!

原帖由 hoching 於 2007-12-20 19:15 發表

 登錄/註冊後可看大圖

鏍絲!!!!

作者: txzmxn 時間: 2007-12-21 09:50
好震撼! 你朋友仲有的倉底貨仲有多少, 我都想買架

作者: mikewu 時間: 2007-12-21 11:13

原帖由 eddywon 於 2007-12-20 22:07 發表

 登錄/註冊後可看大圖

I thought I should try to use industrial magnets for the fixing of the hard shell..... If it works, will post to let bros know !!

Don't worry, I have a MUCH better way to attach the shell on the body. But what you need is a body pole from the Red Bull Kit (you only need 2 of them in the front, I'll show the rear sometimes tomorrow)

作者: eddywon 時間: 2007-12-21 12:23
awaiting !!

作者: eddywon 時間: 2007-12-23 23:20
標題: still awaiting !!
Hello Mike,
do you still remember this ??

I want to buy the CC-01 before X'mas holiday wor, just want to know what is needed to have the defender shell on........
thx in advance......

原帖由 mikewu 於 2007-12-21 11:13 發表

 登錄/註冊後可看大圖

Don't worry, I have a MUCH better way to attach the shell on the body. But what you need is a body pole from the Red Bull Kit (you only need 2 of them in the front, I'll show the rear sometimes tom ...

作者: mikewu 時間: 2007-12-24 09:52

原帖由 eddywon 於 2007-12-23 23:20 發表

 登錄/註冊後可看大圖

Hello Mike,
do you still remember this ??
I want to buy the CC-01 before X'mas holiday wor, just want to know what is needed to have the defender shell on........
thx in advance......

Sorry mate... I was taking care of something else this weekend.... I promise I'll post photos tonight. But again, remember, you need a pair of Redbull VW body mount!!!

作者: eddywon 時間: 2007-12-24 11:02
Easy man,
RC to me is a hobby, not a job.

Thx in advance !!

作者: tiger1 時間: 2007-12-24 18:41
Amazing!!!

作者: Swift 時間: 2007-12-25 17:54

原帖由 txzmxn 於 2007-12-21 09:50 發表

 登錄/註冊後可看大圖

好震撼! 你朋友仲有的倉底貨仲有多少, 我都想買架

Hi, txzmxn...你的頭像架pajero好新淨喎....love it! 好好keep吧 ! 其在難尋...

作者: txzmxn 時間: 2007-12-25 18:23

原帖由 Swift 於 2007-12-25 05:54 PM 發表

 登錄/註冊後可看大圖

Hi, txzmxn...你的頭像架pajero好新淨喎....love it! 好好keep吧 ! 其在難尋...

新極估計都有十多年日子啦~ 其實近睇都有啲明顯花痕...
係! 要好好keep, 在佢 re-rele. 之前都只會作靜態展示用

作者: Swift 時間: 2007-12-25 23:00

原帖由 txzmxn 於 2007-12-25 18:23 發表

 登錄/註冊後可看大圖

新極估計都有十多年日子啦~ 其實近睇都有啲明顯花痕...
係! 要好好keep, 在佢 re-rele. 之前都只會作靜態展示用

小弟...非常善慕!

作者: chow169 時間: 2008-1-2 03:42
標題: D90 工程進行中....

[attach]133926[/attach]

[attach]133927[/attach]

[attach]133928[/attach]

作者: Swift 時間: 2008-1-2 14:03
chow169兄,

睇你洗o左個殼喎...記得噴灰底灰先,跟住噴白底灰,最後噴上你

喜愛既colour。
咁就

靚哂!

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)