RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: spada 油門推桿問題 [打印本頁]

作者: kennethwsl    時間: 2008-1-7 10:37
標題: spada 油門推桿問題
My spada nearly finished.. now is in the setting 油門推桿 part.
My question is that the 'ball join' to control the throttle seems easily 'fall off'. It cannot hold firmly ..
Any brother could give me some clues? Thanks.
作者: mtaristo    時間: 2008-1-7 11:31
我同D friend都試過, 原裝果粒完全係吾得. 去HEC買過粒膠波頭啦  
作者: piccoengine    時間: 2008-1-7 11:55
下...我都係用原裝ja bor~~
作者: rk2    時間: 2008-1-7 12:00
原帖由 kennethwsl 於 2008-1-7 10:37 發表
My spada nearly finished.. now is in the setting 油門推桿 part.
My question is that the 'ball join' to control the throttle seems easily 'fall off'. It cannot hold firmly ..
Any brother could give m ...

靜止, 試動作都 fall off 咁差 !!   kyosho 口點搞呀 !!
作者: kennethwsl    時間: 2008-1-7 14:14
原帖由 mtaristo 於 2008-1-7 11:31 發表
我同D friend都試過, 原裝果粒完全係吾得. 去HEC買過粒膠波頭啦  

oh icic..
C兄可唔可以pm 提示下響邊度買? thx thx
作者: kennethwsl    時間: 2008-1-7 14:15
原帖由 piccoengine 於 2008-1-7 11:55 發表
下...我都係用原裝ja bor~~

Mm.. 唔知係咪要條桿set 得好好佢先唔會甩..
e+ 係超易甩出離..
如果玩僅full雞甩左都唔知點算.. ~_~
作者: rk2    時間: 2008-1-7 14:47
原帖由 kennethwsl 於 2008-1-7 14:14 發表

oh icic..
C兄可唔可以pm 提示下響邊度買? thx thx

佢未講 左囉 " HEC" = RED STAR
作者: kennethwsl    時間: 2008-1-7 16:40
原帖由 rk2 於 2008-1-7 14:47 發表

佢未講 左囉 " HEC" = RED STAR


係? 唔好意思:p Thanks C兄!!!
希望快d 跑得啦..  好excited..




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2