RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: My Gmade Spider Arrived! Please help....... [打印本頁]

作者: nemo 時間: 2008-1-15 01:05
標題: My Gmade Spider Arrived! Please help.......
I just got this Gmade Spider today!
I am a newhand in Crawler, can anyone teach me which ESC, servo, motor, battery, shocks/spring are best for this truck please?
Should I use brushless motor system or not?
Should I change the wheels to beadlock? I see a C Hing here put lead weights on the front wheel, should I do it with this truck?

Sorry I have so many questions, because I know nothing about this truck.......

Thank you very much for your help.

[ 本帖最後由 nemo 於 2008-1-15 01:07 編輯 ]

作者: ken8298 時間: 2008-1-15 02:51
你要玩無刷就要買兩個esc因為而家無一隻esc可以用兩隻無刷
http://www.teamnovak.com/products/esc/3219_Goat/index.html
我用緊呢隻.用兩隻有刷55T超正.用過你會覺得其他無得比(暫時)
servo用mg599大陸做都ok架.幾十蚊掃左齒都唔心痛
電我用li-po因為我手上有係度

控我用dx6.
玩 Crawler最緊要esc個bec.Ａ數要夠大因你要用兩隻大扭力servo用平價esc會
燒
有唔明大家可以再研究

作者: ken8298 時間: 2008-1-15 02:53
beadlock.......http://www.shopatron.com/product ... 1/136.0.791.0.0.0.0

作者: ken8298 時間: 2008-1-15 02:56
仲有你架車個波箱有其他C兄用過....過....要......補強

作者: nemo 時間: 2008-1-15 11:17
Thank you Ken8298, I will go to KWS to find those items.

Could you tell me how the reinforce the gearbox? What parts I need to buy?

Thank you.

作者: ray34567540 時間: 2008-1-15 11:37
Hi bro nemo.
there is a crawler party at this sunday. you may come to take a look.

登錄/註冊後可看大圖

http://www.rc-daily.com/forum/vi ... p;extra=&page=1

作者: 聶風 時間: 2008-1-15 12:01
我都有架 spider 2
我用有刷 55t 都要加個 3:1 波箱先夠力。無加架車會好爆 & 無力爬
去至樂問下佢仲有無貨，記住要買金屬那個喎
如果你用埋鋁製 beadlock rim 都可以不用加鉛啦
星期日來石澳睇睇吹下水囉，好過上 forum 齋問

登錄/註冊後可看大圖

作者: hkBuggyboy 時間: 2008-1-15 12:39
Cool Man.....fun fun fun

作者: nemo 時間: 2008-1-15 23:24
Thank you for everyone for your advise!!

Hopefully I can come to Shek O to join your Crawler Party if I don't have to work this Sunday.

作者: ken8298 時間: 2008-1-16 01:38
咁可以約出黎食食飯吹吹水
我星期日都唔去得

作者: minimini 時間: 2008-1-16 01:43

原帖由聶風於 2008-1-15 12:01 發表

 登錄/註冊後可看大圖

我都有架 spider 2
我用有刷 55t 都要加個 3:1 波箱先夠力。無加架車會好爆 & 無力爬
去至樂問下佢仲有無貨，記住要買金屬那個喎
如果你用埋鋁製 beadlock rim 都可以不用加鉛啦
星期日來石澳睇睇吹下水囉，好過 ...

hi bro nip fung.......the shell is very nice.......is it from HPI or Proline ??....... Thx !!

作者: ken8298 時間: 2008-1-16 01:54
Could you tell me how the reinforce the gearbox?.......聶風兄會幫到你個問題

作者: 聶風 時間: 2008-1-16 10:05

原帖由 minimini 於 2008-1-16 01:43 發表

 登錄/註冊後可看大圖

hi bro nip fung.......the shell is very nice.......is it from HPI or Proline ??....... Thx !!

proline 1/8 ford 150，不過 proline 唔再 f-150 shell了

作者: 聶風 時間: 2008-1-16 10:13

原帖由 ken8298 於 2008-1-16 01:54 發表

 登錄/註冊後可看大圖

Could you tell me how the reinforce the gearbox?.......聶風兄會幫到你個問題

入去逐頁睇啦
http://www.rc-daily.com/forum/vi ... &extra=page%3D9

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)